[PATCH] imx6: fix pcie enumeration

[Lorenzo Pieralisi]

On Mon, Jan 08, 2018 at 12:13:34PM +0100, Koen Vandeputte wrote:
> 
> 
> On 2018-01-08 12:00, Lorenzo Pieralisi wrote:
> >[+cc Joao, Jingoo]
> >
> >On Mon, Jan 08, 2018 at 09:51:37AM +0100, Koen Vandeputte wrote:
> >
> >[...]
> >
> >>[ Node 4 | node-4 ] lspci -v
> >>00:00.0 PCI bridge: Synopsys, Inc. Device abcd (rev 01) (prog-if 00
> >>[Normal decode])
> >>     Flags: bus master, fast devsel, latency 0, IRQ 298
> >>     Memory at 01000000 (32-bit, non-prefetchable) [size=1M]
> >>     Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> >                                      ^^^^^^^^^^^^^^
> >
> >So basically, the subordinate number in the root port does not
> >affect config space forwarding from what I see and it has always
> >been like that for dwc.
> >
> >You are forced to update it to 0xff because otherwise the kernel
> >stops enumerating bus numbers > 1
> Indeed, which affects all devices using Designware PCIe init + a
> PCIe bridge downstream
> >but that's a software issue
> >not HW - the subordinate bus number does not seem to affect anything
> >here.
> 
> >Sigh.
> >
> >Another option would consist in forcing the kernel to reassign
> >all bus numbers by setting the PCI_REASSIGN_ALL_BUS flag but
> >that's not a good idea given how inconsistent that flag usage is.
> >
> >I think that updating the subordinate bus numbers in the DWC
> >config register is the correct solution to make sure the kernel
> >won't get confused anymore by what seems to be a fake root port,
> >I need input from DWC maintainers to confirm my understanding.
> >
> >Thanks,
> >Lorenzo
> >
> 
> The patch I'm currently using internally:
> 
> 
> --- a/drivers/pci/host/pcie-designware.c
> +++ b/drivers/pci/host/pcie-designware.c
> @@ -861,7 +861,7 @@ void dw_pcie_setup_rc(struct pcie_port *
>      /* setup bus numbers */
>      val = dw_pcie_readl_rc(pp, PCI_PRIMARY_BUS);
>      val &= 0xff000000;
> -    val |= 0x00010100;
> +    val |= 0x00ff0100;
>      dw_pcie_writel_rc(pp, PCI_PRIMARY_BUS, val);
> 
>      /* setup command register */
> 
> 
> Above version logically fixes it for all dwc devices using a bridge
> after the RC, not only imx6.
> If this is fine, I would submit the patch above and drop the current one.
It is fine by me but I won't merge it till I get ACKs and tested-by
from the respective maintainers - it can have potential widespread
impact.

> Backporting this to stable kernels (4.9 .. 4.4 .. etc) will fix all
> nasty warnings on these setups during boot without any change in
> functionality.
> These kernels will require a separate patch as this source file got
> moved & renamed.
> Thanks for your time and analysis so far,

Thank you for reporting it and fixing it.

Lorenzo