[PATCH 0/6] Initial support for NVIDIA Tegra194
Mikko Perttunen
mperttunen at nvidia.com
Sun Jan 7 20:54:32 PST 2018
Hello everyone,
this series adds initial support for the NVIDIA Tegra194 "Xavier"
system-on-chip. Initially UART, I2C, SDMMC, as well as the PMIC
are supported, allowing booting to a console.
The changes consist almost completely of the new device trees,
however some fixes are required in the BPMP driver to support the
new channel layout in Tegra194.
The series has been tested on Tegra186 (Jetson TX2) and Tegra194
(P2972).
Cheers,
Mikko
Mikko Perttunen (6):
firmware: tegra: Simplify channel management
soc/tegra: Add Tegra194 SoC configuration option
soc/tegra: pmc: Add Tegra194 compatibility string
dt-bindings: tegra: Add documentation for nvidia,tegra194-pmc
arm64: tegra: Add Tegra194 chip device tree
arm64: tegra: Add device tree for the Tegra194 P2972-0000 board
.../bindings/arm/tegra/nvidia,tegra186-pmc.txt | 2 +
arch/arm64/boot/dts/nvidia/Makefile | 1 +
arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 246 +++++++++++++++
arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 14 +
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 334 +++++++++++++++++++++
arch/arm64/configs/defconfig | 1 +
drivers/firmware/tegra/bpmp.c | 142 ++++-----
drivers/soc/tegra/Kconfig | 10 +
drivers/soc/tegra/pmc.c | 1 +
include/dt-bindings/clock/tegra194-clock.h | 59 ++++
include/dt-bindings/gpio/tegra194-gpio.h | 59 ++++
include/dt-bindings/reset/tegra194-reset.h | 40 +++
include/soc/tegra/bpmp.h | 4 +-
13 files changed, 833 insertions(+), 80 deletions(-)
create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
create mode 100644 arch/arm64/boot/dts/nvidia/tegra194.dtsi
create mode 100644 include/dt-bindings/clock/tegra194-clock.h
create mode 100644 include/dt-bindings/gpio/tegra194-gpio.h
create mode 100644 include/dt-bindings/reset/tegra194-reset.h
--
2.1.4
More information about the linux-arm-kernel
mailing list