[PATCH 2/2] cpufreq: imx6q: add 696MHz operating point for i.mx6ul

[Rafael J. Wysocki]

On Saturday, January 6, 2018 4:05:41 AM CET Anson Huang wrote:
> Hi, Rafael
> 
> Best Regards!
> Anson Huang
> 
> 
> > -----Original Message-----
> > From: rjwysocki at gmail.com [mailto:rjwysocki at gmail.com] On Behalf Of Rafael
> > J. Wysocki
> > Sent: 2018-01-05 8:21 PM
> > To: Anson Huang <anson.huang at nxp.com>
> > Cc: linux-arm-kernel at lists.infradead.org; devicetree at vger.kernel.org; Linux
> > PM <linux-pm at vger.kernel.org>; Linux Kernel Mailing List <linux-
> > kernel at vger.kernel.org>; Shawn Guo <shawnguo at kernel.org>; Sascha Hauer
> > <kernel at pengutronix.de>; Fabio Estevam <fabio.estevam at nxp.com>; Rob
> > Herring <robh+dt at kernel.org>; Mark Rutland <mark.rutland at arm.com>;
> > Russell King - ARM Linux <linux at armlinux.org.uk>; Rafael J. Wysocki
> > <rjw at rjwysocki.net>; Viresh Kumar <viresh.kumar at linaro.org>; Jacky Bai
> > <ping.bai at nxp.com>; A.s. Dong <aisheng.dong at nxp.com>
> > Subject: Re: [PATCH 2/2] cpufreq: imx6q: add 696MHz operating point for
> > i.mx6ul
> > 
> > On Tue, Jan 2, 2018 at 6:07 PM, Anson Huang <Anson.Huang at nxp.com> wrote:
> > > Add 696MHz operating point for i.MX6UL, only for those parts with
> > > speed grading fuse set to 2b'10 supports 696MHz operating point, so,
> > > speed grading check is also added for i.MX6UL in this patch, the clock
> > > tree for each operating point are as below:
> > >
> > > 696MHz:
> > >     pll1                       696000000
> > >        pll1_bypass             696000000
> > >           pll1_sys             696000000
> > >              pll1_sw           696000000
> > >                 arm            696000000
> > > 528MHz:
> > >     pll2                       528000000
> > >        pll2_bypass             528000000
> > >           pll2_bus             528000000
> > >              ca7_secondary_sel 528000000
> > >                 step           528000000
> > >                    pll1_sw     528000000
> > >                       arm      528000000
> > > 396MHz:
> > >     pll2_pfd2_396m             396000000
> > >        ca7_secondary_sel       396000000
> > >           step                 396000000
> > >              pll1_sw           396000000
> > >                 arm            396000000
> > > 198MHz:
> > >     pll2_pfd2_396m             396000000
> > >        ca7_secondary_sel       396000000
> > >           step                 396000000
> > >              pll1_sw           396000000
> > >                 arm            198000000
> > >
> > > Signed-off-by: Anson Huang <Anson.Huang at nxp.com>
> > 
> > This doesn't apply for me and in a nontrivial way.
> > 
> > What kernel is it against?
> 
> I did it based on linux-next, it should be on linux-next-pm branch, I redo
> the patch set V2 based on linux-next-pm, also redo the test,
> sorry for the inconvenience.

But you didn't add the Reviewed-by: tags from Fabio to them.

Was that on purpose or by mistake?

Thanks,
Rafael