[PATCH 3/3] arm: KVM: Invalidate BTB on guest exit
Ard Biesheuvel
ard.biesheuvel at linaro.org
Sat Jan 6 05:27:13 PST 2018
On 6 January 2018 at 12:09, Marc Zyngier <marc.zyngier at arm.com> wrote:
> In order to avoid aliasing attacks against the branch predictor,
> let's invalidate the BTB on guest exit. This is made complicated
> by the fact that we cannot take a branch before invalidating the
> BTB.
>
> Another thing is that we perform the invalidation on all
> implementations, no matter if they are affected or not.
>
> Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
> ---
> arch/arm/kvm/hyp/hyp-entry.S | 74 +++++++++++++++++++++++++++++++++++++-------
> 1 file changed, 63 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/kvm/hyp/hyp-entry.S b/arch/arm/kvm/hyp/hyp-entry.S
> index 95a2faefc070..aa8adfa64ec9 100644
> --- a/arch/arm/kvm/hyp/hyp-entry.S
> +++ b/arch/arm/kvm/hyp/hyp-entry.S
> @@ -61,15 +61,60 @@
> __kvm_hyp_vector:
> .global __kvm_hyp_vector
>
> - @ Hyp-mode exception vector
> - W(b) hyp_reset
> - W(b) hyp_undef
> - W(b) hyp_svc
> - W(b) hyp_pabt
> - W(b) hyp_dabt
> - W(b) hyp_hvc
> - W(b) hyp_irq
> - W(b) hyp_fiq
> + /*
> + * We encode the exception entry in the bottom 3 bits of
> + * SP, and we have to guarantee to be 8 bytes aligned.
> + */
> + add sp, sp, #1 /* Reset 7 */
> + add sp, sp, #1 /* Undef 6 */
> + add sp, sp, #1 /* Syscall 5 */
> + add sp, sp, #1 /* Prefetch abort 4 */
> + add sp, sp, #1 /* Data abort 3 */
> + add sp, sp, #1 /* HVC 2 */
> + add sp, sp, #1 /* IRQ 1 */
> + add sp, sp, #1 /* FIQ 0 */
> +
> + sub sp, sp, #1
> +
> + mcr p15, 0, r0, c7, c5, 6 /* BPIALL */
> + isb
> +
> + /*
> + * As we cannot use any temporary registers and cannot
> + * clobber SP, we can decode the exception entry using
> + * an unrolled binary search.
> + */
> + tst sp, #4
> + bne 1f
> +
> + tst sp, #2
> + bne 3f
> +
> + tst sp, #1
> + bic sp, sp, #0x7
> + bne hyp_irq
> + b hyp_irq
hyp_fiq ?
> +
> +1:
> + tst sp, #2
> + bne 2f
> +
> + tst sp, #1
> + bic sp, sp, #0x7
> + bne hyp_svc
> + b hyp_pabt
> +
> +2:
> + tst sp, #1
> + bic sp, sp, #0x7
> + bne hyp_reset
> + b hyp_undef
> +
> +3:
> + tst sp, #1
> + bic sp, sp, #0x7
> + bne hyp_dabt
> + b hyp_hvc
>
> .macro invalid_vector label, cause
> .align
> @@ -149,7 +194,14 @@ hyp_hvc:
> bx ip
>
> 1:
> - push {lr}
> + /*
> + * Pushing r2 here is just a way of keeping the stack aligned to
> + * 8 bytes on any path that can trigger a HYP exception. Here,
> + * we may well be about to jump into the guest, and the guest
> + * exit would otherwise be badly decoded by our fancy
> + * "decode-exception-without-a-branch" code...
> + */
> + push {r2, lr}
>
> mov lr, r0
> mov r0, r1
> @@ -159,7 +211,7 @@ hyp_hvc:
> THUMB( orr lr, #1)
> blx lr @ Call the HYP function
>
> - pop {lr}
> + pop {r2, lr}
> eret
>
> guest_trap:
> --
> 2.14.2
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-arm-kernel
mailing list