[PATCH v7 1/5] scsi: ufs: add Hisilicon ufs driver code

Li Wei liwei213 at huawei.com
Sat Jan 6 01:51:13 PST 2018


add Hisilicon ufs driver code.

Signed-off-by: Li Wei <liwei213 at huawei.com>
Signed-off-by: Geng Jianfeng <gengjianfeng at hisilicon.com>
Signed-off-by: Zang Leigang <zangleigang at hisilicon.com>
Signed-off-by: Yu Jianfeng <steven.yujianfeng at hisilicon.com>
---
 drivers/scsi/ufs/Kconfig    |   9 +
 drivers/scsi/ufs/Makefile   |   1 +
 drivers/scsi/ufs/ufs-hisi.c | 621 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/scsi/ufs/ufs-hisi.h | 116 +++++++++
 4 files changed, 747 insertions(+)
 create mode 100644 drivers/scsi/ufs/ufs-hisi.c
 create mode 100644 drivers/scsi/ufs/ufs-hisi.h

diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index e27b4d4e6ae2..e09fe6ab3572 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -100,3 +100,12 @@ config SCSI_UFS_QCOM
 
 	  Select this if you have UFS controller on QCOM chipset.
 	  If unsure, say N.
+
+config SCSI_UFS_HISI
+	tristate "Hisilicon specific hooks to UFS controller platform driver"
+	depends on (ARCH_HISI || COMPILE_TEST) && SCSI_UFSHCD_PLATFORM
+	---help---
+	  This selects the Hisilicon specific additions to UFSHCD platform driver.
+
+	  Select this if you have UFS controller on Hisilicon chipset.
+	  If unsure, say N.
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index 9310c6c83041..2e40fcd5f8b3 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -3,6 +3,7 @@
 obj-$(CONFIG_SCSI_UFS_DWC_TC_PCI) += tc-dwc-g210-pci.o ufshcd-dwc.o tc-dwc-g210.o
 obj-$(CONFIG_SCSI_UFS_DWC_TC_PLATFORM) += tc-dwc-g210-pltfrm.o ufshcd-dwc.o tc-dwc-g210.o
 obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
+obj-$(CONFIG_SCSI_UFS_HISI) += ufs-hisi.o
 obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
 obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
 obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
diff --git a/drivers/scsi/ufs/ufs-hisi.c b/drivers/scsi/ufs/ufs-hisi.c
new file mode 100644
index 000000000000..2f3326cc016c
--- /dev/null
+++ b/drivers/scsi/ufs/ufs-hisi.c
@@ -0,0 +1,621 @@
+/*
+ * HiSilicon Hixxxx UFS Driver
+ *
+ * Copyright (c) 2016-2017 Linaro Ltd.
+ * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
+ *
+ * Released under the GPLv2 only.
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/time.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include "ufshcd.h"
+#include "ufshcd-pltfrm.h"
+#include "unipro.h"
+#include "ufs-hisi.h"
+#include "ufshci.h"
+
+static int ufs_hisi_check_hibern8(struct ufs_hba *hba)
+{
+	int err = 0;
+	u32 tx_fsm_val_0 = 0;
+	u32 tx_fsm_val_1 = 0;
+	unsigned long timeout = jiffies + msecs_to_jiffies(HBRN8_POLL_TOUT_MS);
+
+	do {
+		err = ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, 0),
+				      &tx_fsm_val_0);
+		err |= ufshcd_dme_get(hba,
+		    UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, 1), &tx_fsm_val_1);
+		if (err || (tx_fsm_val_0 == TX_FSM_HIBERN8 &&
+			tx_fsm_val_1 == TX_FSM_HIBERN8))
+			break;
+
+		/* sleep for max. 200us */
+		usleep_range(100, 200);
+	} while (time_before(jiffies, timeout));
+
+	/*
+	 * we might have scheduled out for long during polling so
+	 * check the state again.
+	 */
+	if (time_after(jiffies, timeout)) {
+		err = ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, 0),
+				     &tx_fsm_val_0);
+		err |= ufshcd_dme_get(hba,
+		 UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, 1), &tx_fsm_val_1);
+	}
+
+	if (err) {
+		dev_err(hba->dev, "%s: unable to get TX_FSM_STATE, err %d\n",
+			__func__, err);
+	} else if (tx_fsm_val_0 != TX_FSM_HIBERN8 ||
+			 tx_fsm_val_1 != TX_FSM_HIBERN8) {
+		err = -1;
+		dev_err(hba->dev, "%s: invalid TX_FSM_STATE, lane0 = %d, lane1 = %d\n",
+			__func__, tx_fsm_val_0, tx_fsm_val_1);
+	}
+
+	return err;
+}
+
+static void ufs_hi3660_clk_init(struct ufs_hba *hba)
+{
+	struct ufs_hisi_host *host = ufshcd_get_variant(hba);
+
+	ufs_sys_ctrl_clr_bits(host, BIT_SYSCTRL_REF_CLOCK_EN, PHY_CLK_CTRL);
+	if (ufs_sys_ctrl_readl(host, PHY_CLK_CTRL) & BIT_SYSCTRL_REF_CLOCK_EN)
+		mdelay(1);
+	/* use abb clk */
+	ufs_sys_ctrl_clr_bits(host, BIT_UFS_REFCLK_SRC_SEl, UFS_SYSCTRL);
+	ufs_sys_ctrl_clr_bits(host, BIT_UFS_REFCLK_ISO_EN, PHY_ISO_EN);
+	/* open mphy ref clk */
+	ufs_sys_ctrl_set_bits(host, BIT_SYSCTRL_REF_CLOCK_EN, PHY_CLK_CTRL);
+}
+
+static void ufs_hi3660_soc_init(struct ufs_hba *hba)
+{
+	struct ufs_hisi_host *host = ufshcd_get_variant(hba);
+	u32 reg;
+
+	if (!IS_ERR(host->rst))
+		reset_control_assert(host->rst);
+
+	/* HC_PSW powerup */
+	ufs_sys_ctrl_set_bits(host, BIT_UFS_PSW_MTCMOS_EN, PSW_POWER_CTRL);
+	udelay(10);
+	/* notify PWR ready */
+	ufs_sys_ctrl_set_bits(host, BIT_SYSCTRL_PWR_READY, HC_LP_CTRL);
+	ufs_sys_ctrl_writel(host, MASK_UFS_DEVICE_RESET | 0,
+		UFS_DEVICE_RESET_CTRL);
+
+	reg = ufs_sys_ctrl_readl(host, PHY_CLK_CTRL);
+	reg = (reg & ~MASK_SYSCTRL_CFG_CLOCK_FREQ) | UFS_FREQ_CFG_CLK;
+	/* set cfg clk freq */
+	ufs_sys_ctrl_writel(host, reg, PHY_CLK_CTRL);
+	/* set ref clk freq */
+	ufs_sys_ctrl_clr_bits(host, MASK_SYSCTRL_REF_CLOCK_SEL, PHY_CLK_CTRL);
+	/* bypass ufs clk gate */
+	ufs_sys_ctrl_set_bits(host, MASK_UFS_CLK_GATE_BYPASS,
+						 CLOCK_GATE_BYPASS);
+	ufs_sys_ctrl_set_bits(host, MASK_UFS_SYSCRTL_BYPASS, UFS_SYSCTRL);
+
+	/* open psw clk */
+	ufs_sys_ctrl_set_bits(host, BIT_SYSCTRL_PSW_CLK_EN, PSW_CLK_CTRL);
+	/* disable ufshc iso */
+	ufs_sys_ctrl_clr_bits(host, BIT_UFS_PSW_ISO_CTRL, PSW_POWER_CTRL);
+	/* disable phy iso */
+	ufs_sys_ctrl_clr_bits(host, BIT_UFS_PHY_ISO_CTRL, PHY_ISO_EN);
+	/* notice iso disable */
+	ufs_sys_ctrl_clr_bits(host, BIT_SYSCTRL_LP_ISOL_EN, HC_LP_CTRL);
+
+	if (!IS_ERR(host->assert))
+		reset_control_deassert(host->assert);
+
+	/* disable lp_reset_n */
+	ufs_sys_ctrl_set_bits(host, BIT_SYSCTRL_LP_RESET_N, RESET_CTRL_EN);
+	mdelay(1);
+
+	ufs_sys_ctrl_writel(host, MASK_UFS_DEVICE_RESET | BIT_UFS_DEVICE_RESET,
+		UFS_DEVICE_RESET_CTRL);
+
+	msleep(20);
+
+	/*
+	 * enable the fix of linereset recovery,
+	 * and enable rx_reset/tx_rest beat
+	 * enable ref_clk_en override(bit5) &
+	 * override value = 1(bit4), with mask
+	 */
+	ufs_sys_ctrl_writel(host, 0x03300330, UFS_DEVICE_RESET_CTRL);
+
+	if (!IS_ERR(host->rst))
+		reset_control_deassert(host->rst);
+}
+
+static int ufs_hisi_link_startup_pre_change(struct ufs_hba *hba)
+{
+	int err;
+	uint32_t value;
+	uint32_t reg;
+
+	/* Unipro VS_mphy_disable */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD0C1, 0x0), 0x1);
+	/* PA_HSSeries */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x156A, 0x0), 0x2);
+	/* MPHY CBRATESEL */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8114, 0x0), 0x1);
+	/* MPHY CBOVRCTRL2 */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8121, 0x0), 0x2D);
+	/* MPHY CBOVRCTRL3 */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8122, 0x0), 0x1);
+	/* Unipro VS_MphyCfgUpdt */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD085, 0x0), 0x1);
+	/* MPHY RXOVRCTRL4 rx0 */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x800D, 0x4), 0x58);
+	/* MPHY RXOVRCTRL4 rx1 */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x800D, 0x5), 0x58);
+	/* MPHY RXOVRCTRL5 rx0 */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x800E, 0x4), 0xB);
+	/* MPHY RXOVRCTRL5 rx1 */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x800E, 0x5), 0xB);
+	/* MPHY RXSQCONTROL rx0 */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8009, 0x4), 0x1);
+	/* MPHY RXSQCONTROL rx1 */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8009, 0x5), 0x1);
+	/* Unipro VS_MphyCfgUpdt */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD085, 0x0), 0x1);
+
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8113, 0x0), 0x1);
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD085, 0x0), 0x1);
+
+	/* Tactive RX */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x008F, 0x4), 0x7);
+	/* Tactive RX */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x008F, 0x5), 0x7);
+
+	/* Gear3 Synclength */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x0095, 0x4), 0x4F);
+	/* Gear3 Synclength */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x0095, 0x5), 0x4F);
+	/* Gear2 Synclength */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x0094, 0x4), 0x4F);
+	/* Gear2 Synclength */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x0094, 0x5), 0x4F);
+	/* Gear1 Synclength */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x008B, 0x4), 0x4F);
+	/* Gear1 Synclength */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x008B, 0x5), 0x4F);
+	/* Thibernate Tx */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x000F, 0x0), 0x5);
+	/* Thibernate Tx */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x000F, 0x1), 0x5);
+
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD085, 0x0), 0x1);
+	/* Unipro VS_mphy_disable */
+	ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(0xD0C1, 0x0), &value);
+	if (value != 0x1)
+		dev_info(hba->dev,
+		    "Warring!!! Unipro VS_mphy_disable is 0x%x\n", value);
+
+	/* Unipro VS_mphy_disable */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD0C1, 0x0), 0x0);
+	err = ufs_hisi_check_hibern8(hba);
+	if (err)
+		dev_err(hba->dev, "ufs_hisi_check_hibern8 error\n");
+
+	ufshcd_writel(hba, UFS_HCLKDIV_NORMAL_VALUE, UFS_REG_HCLKDIV);
+
+	/* disable auto H8 */
+	reg = ufshcd_readl(hba, REG_AUTO_HIBERNATE_IDLE_TIMER);
+	reg = reg & (~UFS_AHIT_AH8ITV_MASK);
+	ufshcd_writel(hba, reg, REG_AUTO_HIBERNATE_IDLE_TIMER);
+
+	/* Unipro PA_Local_TX_LCC_Enable */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x155E, 0x0), 0x0);
+	/* close Unipro VS_Mk2ExtnSupport */
+	ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD0AB, 0x0), 0x0);
+	ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(0xD0AB, 0x0), &value);
+	if (value != 0) {
+		/* Ensure close success */
+		dev_info(hba->dev, "WARN: close VS_Mk2ExtnSupport failed\n");
+	}
+
+	return err;
+}
+
+static int ufs_hisi_link_startup_post_change(struct ufs_hba *hba)
+{
+	struct ufs_hisi_host *host = ufshcd_get_variant(hba);
+
+	/* Unipro DL_AFC0CreditThreshold */
+	ufshcd_dme_set(hba, UIC_ARG_MIB(0x2044), 0x0);
+	/* Unipro DL_TC0OutAckThreshold */
+	ufshcd_dme_set(hba, UIC_ARG_MIB(0x2045), 0x0);
+	/* Unipro DL_TC0TXFCThreshold */
+	ufshcd_dme_set(hba, UIC_ARG_MIB(0x2040), 0x9);
+
+	/* not bypass ufs clk gate */
+	ufs_sys_ctrl_clr_bits(host, MASK_UFS_CLK_GATE_BYPASS,
+						CLOCK_GATE_BYPASS);
+	ufs_sys_ctrl_clr_bits(host, MASK_UFS_SYSCRTL_BYPASS,
+						UFS_SYSCTRL);
+
+	/* select received symbol cnt */
+	ufshcd_dme_set(hba, UIC_ARG_MIB(0xd09a), 0x80000000);
+	 /* reset counter0 and enable */
+	ufshcd_dme_set(hba, UIC_ARG_MIB(0xd09c), 0x00000005);
+
+	return 0;
+}
+
+static int ufs_hi3660_link_startup_notify(struct ufs_hba *hba,
+					  enum ufs_notify_change_status status)
+{
+	int err = 0;
+
+	switch (status) {
+	case PRE_CHANGE:
+		err = ufs_hisi_link_startup_pre_change(hba);
+		break;
+	case POST_CHANGE:
+		err = ufs_hisi_link_startup_post_change(hba);
+		break;
+	default:
+		break;
+	}
+
+	return err;
+}
+
+struct ufs_hisi_dev_params {
+	u32 pwm_rx_gear; /* pwm rx gear to work in */
+	u32 pwm_tx_gear; /* pwm tx gear to work in */
+	u32 hs_rx_gear;  /* hs rx gear to work in */
+	u32 hs_tx_gear;  /* hs tx gear to work in */
+	u32 rx_lanes;    /* number of rx lanes */
+	u32 tx_lanes;    /* number of tx lanes */
+	u32 rx_pwr_pwm;  /* rx pwm working pwr */
+	u32 tx_pwr_pwm;  /* tx pwm working pwr */
+	u32 rx_pwr_hs;   /* rx hs working pwr */
+	u32 tx_pwr_hs;   /* tx hs working pwr */
+	u32 hs_rate;     /* rate A/B to work in HS */
+	u32 desired_working_mode;
+};
+
+static int ufs_hisi_get_pwr_dev_param(
+				    struct ufs_hisi_dev_params *hisi_param,
+				    struct ufs_pa_layer_attr *dev_max,
+				    struct ufs_pa_layer_attr *agreed_pwr)
+{
+	int min_hisi_gear;
+	int min_dev_gear;
+	bool is_dev_sup_hs = false;
+	bool is_hisi_max_hs = false;
+
+	if (dev_max->pwr_rx == FASTAUTO_MODE || dev_max->pwr_rx == FAST_MODE)
+		is_dev_sup_hs = true;
+
+	if (hisi_param->desired_working_mode == FAST) {
+		is_hisi_max_hs = true;
+		min_hisi_gear = min_t(u32, hisi_param->hs_rx_gear,
+				       hisi_param->hs_tx_gear);
+	} else {
+		min_hisi_gear = min_t(u32, hisi_param->pwm_rx_gear,
+				       hisi_param->pwm_tx_gear);
+	}
+
+	/*
+	 * device doesn't support HS but
+	 * hisi_param->desired_working_mode is HS,
+	 * thus device and hisi_param don't agree
+	 */
+	if (!is_dev_sup_hs && is_hisi_max_hs) {
+		pr_err("%s: device not support HS\n", __func__);
+		return -ENOTSUPP;
+	} else if (is_dev_sup_hs && is_hisi_max_hs) {
+		/*
+		 * since device supports HS, it supports FAST_MODE.
+		 * since hisi_param->desired_working_mode is also HS
+		 * then final decision (FAST/FASTAUTO) is done according
+		 * to hisi_params as it is the restricting factor
+		 */
+		agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
+			hisi_param->rx_pwr_hs;
+	} else {
+		/*
+		 * here hisi_param->desired_working_mode is PWM.
+		 * it doesn't matter whether device supports HS or PWM,
+		 * in both cases hisi_param->desired_working_mode will
+		 * determine the mode
+		 */
+		agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
+			hisi_param->rx_pwr_pwm;
+	}
+
+	/*
+	 * we would like tx to work in the minimum number of lanes
+	 * between device capability and vendor preferences.
+	 * the same decision will be made for rx
+	 */
+	agreed_pwr->lane_tx =
+		min_t(u32, dev_max->lane_tx, hisi_param->tx_lanes);
+	agreed_pwr->lane_rx =
+		min_t(u32, dev_max->lane_rx, hisi_param->rx_lanes);
+
+	/* device maximum gear is the minimum between device rx and tx gears */
+	min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx);
+
+	/*
+	 * if both device capabilities and vendor pre-defined preferences are
+	 * both HS or both PWM then set the minimum gear to be the chosen
+	 * working gear.
+	 * if one is PWM and one is HS then the one that is PWM get to decide
+	 * what is the gear, as it is the one that also decided previously what
+	 * pwr the device will be configured to.
+	 */
+	if ((is_dev_sup_hs && is_hisi_max_hs) ||
+	    (!is_dev_sup_hs && !is_hisi_max_hs))
+		agreed_pwr->gear_rx = agreed_pwr->gear_tx =
+			min_t(u32, min_dev_gear, min_hisi_gear);
+	else
+		agreed_pwr->gear_rx = agreed_pwr->gear_tx = min_hisi_gear;
+
+	agreed_pwr->hs_rate = hisi_param->hs_rate;
+
+	pr_info("ufs final power mode: gear = %d, lane = %d, pwr = %d, rate = %d\n",
+		agreed_pwr->gear_rx, agreed_pwr->lane_rx, agreed_pwr->pwr_rx,
+		agreed_pwr->hs_rate);
+	return 0;
+}
+
+static void ufs_hisi_set_dev_cap(struct ufs_hisi_dev_params *hisi_param)
+{
+	hisi_param->rx_lanes = UFS_HISI_LIMIT_NUM_LANES_RX;
+	hisi_param->tx_lanes = UFS_HISI_LIMIT_NUM_LANES_TX;
+	hisi_param->hs_rx_gear = UFS_HISI_LIMIT_HSGEAR_RX;
+	hisi_param->hs_tx_gear = UFS_HISI_LIMIT_HSGEAR_TX;
+	hisi_param->pwm_rx_gear = UFS_HISI_LIMIT_PWMGEAR_RX;
+	hisi_param->pwm_tx_gear = UFS_HISI_LIMIT_PWMGEAR_TX;
+	hisi_param->rx_pwr_pwm = UFS_HISI_LIMIT_RX_PWR_PWM;
+	hisi_param->tx_pwr_pwm = UFS_HISI_LIMIT_TX_PWR_PWM;
+	hisi_param->rx_pwr_hs = UFS_HISI_LIMIT_RX_PWR_HS;
+	hisi_param->tx_pwr_hs = UFS_HISI_LIMIT_TX_PWR_HS;
+	hisi_param->hs_rate = UFS_HISI_LIMIT_HS_RATE;
+	hisi_param->desired_working_mode = UFS_HISI_LIMIT_DESIRED_MODE;
+}
+
+static void ufs_hisi_pwr_change_pre_change(struct ufs_hba *hba)
+{
+	/* update */
+	ufshcd_dme_set(hba, UIC_ARG_MIB(0x15A8), 0x1);
+	/* PA_TxSkip */
+	ufshcd_dme_set(hba, UIC_ARG_MIB(0x155c), 0x0);
+	/*PA_PWRModeUserData0 = 8191, default is 0*/
+	ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b0), 8191);
+	/*PA_PWRModeUserData1 = 65535, default is 0*/
+	ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b1), 65535);
+	/*PA_PWRModeUserData2 = 32767, default is 0*/
+	ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b2), 32767);
+	/*DME_FC0ProtectionTimeOutVal = 8191, default is 0*/
+	ufshcd_dme_set(hba, UIC_ARG_MIB(0xd041), 8191);
+	/*DME_TC0ReplayTimeOutVal = 65535, default is 0*/
+	ufshcd_dme_set(hba, UIC_ARG_MIB(0xd042), 65535);
+	/*DME_AFC0ReqTimeOutVal = 32767, default is 0*/
+	ufshcd_dme_set(hba, UIC_ARG_MIB(0xd043), 32767);
+	/*PA_PWRModeUserData3 = 8191, default is 0*/
+	ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b3), 8191);
+	/*PA_PWRModeUserData4 = 65535, default is 0*/
+	ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b4), 65535);
+	/*PA_PWRModeUserData5 = 32767, default is 0*/
+	ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b5), 32767);
+	/*DME_FC1ProtectionTimeOutVal = 8191, default is 0*/
+	ufshcd_dme_set(hba, UIC_ARG_MIB(0xd044), 8191);
+	/*DME_TC1ReplayTimeOutVal = 65535, default is 0*/
+	ufshcd_dme_set(hba, UIC_ARG_MIB(0xd045), 65535);
+	/*DME_AFC1ReqTimeOutVal = 32767, default is 0*/
+	ufshcd_dme_set(hba, UIC_ARG_MIB(0xd046), 32767);
+}
+
+static int ufs_hi3660_pwr_change_notify(struct ufs_hba *hba,
+				       enum ufs_notify_change_status status,
+				       struct ufs_pa_layer_attr *dev_max_params,
+				       struct ufs_pa_layer_attr *dev_req_params)
+{
+	struct ufs_hisi_dev_params ufs_hisi_cap;
+	int ret = 0;
+
+	if (!dev_req_params) {
+		dev_err(hba->dev,
+			    "%s: incoming dev_req_params is NULL\n", __func__);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	switch (status) {
+	case PRE_CHANGE:
+		ufs_hisi_set_dev_cap(&ufs_hisi_cap);
+		ret = ufs_hisi_get_pwr_dev_param(
+			&ufs_hisi_cap, dev_max_params, dev_req_params);
+		if (ret) {
+			dev_err(hba->dev,
+			    "%s: failed to determine capabilities\n", __func__);
+			goto out;
+		}
+
+		ufs_hisi_pwr_change_pre_change(hba);
+		break;
+	case POST_CHANGE:
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+out:
+	return ret;
+}
+
+static int ufs_hisi_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
+{
+	struct ufs_hisi_host *host = ufshcd_get_variant(hba);
+
+	if (ufshcd_is_runtime_pm(pm_op))
+		return 0;
+
+	if (host->in_suspend) {
+		WARN_ON(1);
+		return 0;
+	}
+
+	ufs_sys_ctrl_clr_bits(host, BIT_SYSCTRL_REF_CLOCK_EN, PHY_CLK_CTRL);
+	udelay(10);
+	/* set ref_dig_clk override of PHY PCS to 0 */
+	ufs_sys_ctrl_writel(host, 0x00100000, UFS_DEVICE_RESET_CTRL);
+
+	host->in_suspend = true;
+
+	return 0;
+}
+
+static int ufs_hisi_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
+{
+	struct ufs_hisi_host *host = ufshcd_get_variant(hba);
+
+	if (!host->in_suspend)
+		return 0;
+
+	/* set ref_dig_clk override of PHY PCS to 1 */
+	ufs_sys_ctrl_writel(host, 0x00100010, UFS_DEVICE_RESET_CTRL);
+	udelay(10);
+	ufs_sys_ctrl_set_bits(host, BIT_SYSCTRL_REF_CLOCK_EN, PHY_CLK_CTRL);
+
+	host->in_suspend = false;
+	return 0;
+}
+
+static int ufs_hisi_get_resource(struct ufs_hisi_host *host)
+{
+	struct resource *mem_res;
+	struct device *dev = host->hba->dev;
+	struct platform_device *pdev = to_platform_device(dev);
+
+	/* get resource of ufs sys ctrl */
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	host->ufs_sys_ctrl = devm_ioremap_resource(dev, mem_res);
+	if (IS_ERR(host->ufs_sys_ctrl))
+		return PTR_ERR(host->ufs_sys_ctrl);
+
+	return 0;
+}
+
+static void ufs_hisi_set_pm_lvl(struct ufs_hba *hba)
+{
+	hba->rpm_lvl = UFS_PM_LVL_1;
+	hba->spm_lvl = UFS_PM_LVL_3;
+}
+
+/**
+ * ufs_hisi_init_common
+ * @hba: host controller instance
+ */
+static int ufs_hisi_init_common(struct ufs_hba *hba)
+{
+	int err = 0;
+	struct device *dev = hba->dev;
+	struct ufs_hisi_host *host;
+
+	host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
+	if (!host)
+		return -ENOMEM;
+
+	host->hba = hba;
+	ufshcd_set_variant(hba, host);
+
+	host->rst = devm_reset_control_get(dev, "rst");
+	host->assert = devm_reset_control_get(dev, "assert");
+
+	ufs_hisi_set_pm_lvl(hba);
+
+	err = ufs_hisi_get_resource(host);
+	if (err) {
+		ufshcd_set_variant(hba, NULL);
+		return err;
+	}
+
+	return 0;
+}
+
+static int ufs_hi3660_init(struct ufs_hba *hba)
+{
+	int ret = 0;
+	struct device *dev = hba->dev;
+
+	ret = ufs_hisi_init_common(hba);
+	if (ret) {
+		dev_err(dev, "%s: ufs common init fail\n", __func__);
+		return ret;
+	}
+
+	ufs_hi3660_clk_init(hba);
+
+	ufs_hi3660_soc_init(hba);
+
+	return 0;
+}
+
+static struct ufs_hba_variant_ops ufs_hba_hisi_vops = {
+	.name = "hi3660",
+	.init = ufs_hi3660_init,
+	.link_startup_notify = ufs_hi3660_link_startup_notify,
+	.pwr_change_notify = ufs_hi3660_pwr_change_notify,
+	.suspend = ufs_hisi_suspend,
+	.resume = ufs_hisi_resume,
+};
+
+static int ufs_hisi_probe(struct platform_device *pdev)
+{
+	return ufshcd_pltfrm_init(pdev, &ufs_hba_hisi_vops);
+}
+
+static int ufs_hisi_remove(struct platform_device *pdev)
+{
+	struct ufs_hba *hba =  platform_get_drvdata(pdev);
+
+	ufshcd_remove(hba);
+	return 0;
+}
+
+static const struct of_device_id ufs_hisi_of_match[] = {
+	{ .compatible = "hisilicon,hi3660-ufs" },
+	{},
+};
+
+static const struct dev_pm_ops ufs_hisi_pm_ops = {
+	.suspend	= ufshcd_pltfrm_suspend,
+	.resume		= ufshcd_pltfrm_resume,
+	.runtime_suspend = ufshcd_pltfrm_runtime_suspend,
+	.runtime_resume  = ufshcd_pltfrm_runtime_resume,
+	.runtime_idle    = ufshcd_pltfrm_runtime_idle,
+};
+
+static struct platform_driver ufs_hisi_pltform = {
+	.probe	= ufs_hisi_probe,
+	.remove	= ufs_hisi_remove,
+	.shutdown = ufshcd_pltfrm_shutdown,
+	.driver	= {
+		.name	= "ufshcd-hisi",
+		.pm	= &ufs_hisi_pm_ops,
+		.of_match_table = of_match_ptr(ufs_hisi_of_match),
+	},
+};
+module_platform_driver(ufs_hisi_pltform);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ufshcd-hisi");
+MODULE_DESCRIPTION("HiSilicon Hixxxx UFS Driver");
diff --git a/drivers/scsi/ufs/ufs-hisi.h b/drivers/scsi/ufs/ufs-hisi.h
new file mode 100644
index 000000000000..ca5deb7ac338
--- /dev/null
+++ b/drivers/scsi/ufs/ufs-hisi.h
@@ -0,0 +1,116 @@
+/*
+ * Copyright (c) 2017, HiSilicon. All rights reserved.
+ *
+ * Released under the GPLv2 only.
+ * SPDX-License-Identifier: GPL-2.0 
+ */
+
+#ifndef UFS_HISI_H_
+#define UFS_HISI_H_
+
+#define HBRN8_POLL_TOUT_MS	1000
+
+/*
+ * ufs sysctrl specific define
+ */
+#define PSW_POWER_CTRL	(0x04)
+#define PHY_ISO_EN	(0x08)
+#define HC_LP_CTRL	(0x0C)
+#define PHY_CLK_CTRL	(0x10)
+#define PSW_CLK_CTRL	(0x14)
+#define CLOCK_GATE_BYPASS	(0x18)
+#define RESET_CTRL_EN	(0x1C)
+#define UFS_SYSCTRL	(0x5C)
+#define UFS_DEVICE_RESET_CTRL	(0x60)
+
+#define BIT_UFS_PSW_ISO_CTRL		(1 << 16)
+#define BIT_UFS_PSW_MTCMOS_EN		(1 << 0)
+#define BIT_UFS_REFCLK_ISO_EN		(1 << 16)
+#define BIT_UFS_PHY_ISO_CTRL		(1 << 0)
+#define BIT_SYSCTRL_LP_ISOL_EN		(1 << 16)
+#define BIT_SYSCTRL_PWR_READY		(1 << 8)
+#define BIT_SYSCTRL_REF_CLOCK_EN	(1 << 24)
+#define MASK_SYSCTRL_REF_CLOCK_SEL	(0x3 << 8)
+#define MASK_SYSCTRL_CFG_CLOCK_FREQ	(0xFF)
+#define UFS_FREQ_CFG_CLK                (0x39)
+#define BIT_SYSCTRL_PSW_CLK_EN		(1 << 4)
+#define MASK_UFS_CLK_GATE_BYPASS	(0x3F)
+#define BIT_SYSCTRL_LP_RESET_N		(1 << 0)
+#define BIT_UFS_REFCLK_SRC_SEl		(1 << 0)
+#define MASK_UFS_SYSCRTL_BYPASS		(0x3F << 16)
+#define MASK_UFS_DEVICE_RESET		(0x1 << 16)
+#define BIT_UFS_DEVICE_RESET		(0x1)
+
+/*
+ * M-TX Configuration Attributes for Hixxxx
+ */
+#define MPHY_TX_FSM_STATE	0x41
+#define TX_FSM_HIBERN8	0x1
+
+/*
+ * Hixxxx UFS HC specific Registers
+ */
+enum {
+	UFS_REG_OCPTHRTL = 0xc0,
+	UFS_REG_OOCPR    = 0xc4,
+
+	UFS_REG_CDACFG   = 0xd0,
+	UFS_REG_CDATX1   = 0xd4,
+	UFS_REG_CDATX2   = 0xd8,
+	UFS_REG_CDARX1   = 0xdc,
+	UFS_REG_CDARX2   = 0xe0,
+	UFS_REG_CDASTA   = 0xe4,
+
+	UFS_REG_LBMCFG   = 0xf0,
+	UFS_REG_LBMSTA   = 0xf4,
+	UFS_REG_UFSMODE  = 0xf8,
+
+	UFS_REG_HCLKDIV  = 0xfc,
+};
+
+/* AHIT - Auto-Hibernate Idle Timer */
+#define UFS_AHIT_AH8ITV_MASK	0x3FF
+
+/* REG UFS_REG_OCPTHRTL definition */
+#define UFS_HCLKDIV_NORMAL_VALUE	0xE4
+
+/* vendor specific pre-defined parameters */
+#define SLOW	1
+#define FAST	2
+
+#define UFS_HISI_LIMIT_NUM_LANES_RX	2
+#define UFS_HISI_LIMIT_NUM_LANES_TX	2
+#define UFS_HISI_LIMIT_HSGEAR_RX	UFS_HS_G3
+#define UFS_HISI_LIMIT_HSGEAR_TX	UFS_HS_G3
+#define UFS_HISI_LIMIT_PWMGEAR_RX	UFS_PWM_G4
+#define UFS_HISI_LIMIT_PWMGEAR_TX	UFS_PWM_G4
+#define UFS_HISI_LIMIT_RX_PWR_PWM	SLOW_MODE
+#define UFS_HISI_LIMIT_TX_PWR_PWM	SLOW_MODE
+#define UFS_HISI_LIMIT_RX_PWR_HS	FAST_MODE
+#define UFS_HISI_LIMIT_TX_PWR_HS	FAST_MODE
+#define UFS_HISI_LIMIT_HS_RATE	PA_HS_MODE_B
+#define UFS_HISI_LIMIT_DESIRED_MODE	FAST
+
+struct ufs_hisi_host {
+	struct ufs_hba *hba;
+	void __iomem *ufs_sys_ctrl;
+
+	struct reset_control	*rst;
+	struct reset_control	*assert;
+
+	uint64_t caps;
+
+	bool in_suspend;
+};
+
+#define ufs_sys_ctrl_writel(host, val, reg)                                    \
+	writel((val), (host)->ufs_sys_ctrl + (reg))
+#define ufs_sys_ctrl_readl(host, reg) readl((host)->ufs_sys_ctrl + (reg))
+#define ufs_sys_ctrl_set_bits(host, mask, reg)                                 \
+	ufs_sys_ctrl_writel(                                                   \
+		(host), ((mask) | (ufs_sys_ctrl_readl((host), (reg)))), (reg))
+#define ufs_sys_ctrl_clr_bits(host, mask, reg)                                 \
+	ufs_sys_ctrl_writel((host),                                            \
+			    ((~(mask)) & (ufs_sys_ctrl_readl((host), (reg)))), \
+			    (reg))
+#endif /* UFS_HISI_H_ */
-- 
2.15.0




More information about the linux-arm-kernel mailing list