[PATCH 5/7] clk: sunxi-ng: add support for the Allwinner H6 CCU
Icenowy Zheng
icenowy at aosc.io
Fri Jan 5 20:49:16 PST 2018
The Allwinner H6 SoC has a CCU which has been largely rearranged.
Add support for it in the sunxi-ng CCU framework.
Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
---
.../devicetree/bindings/clock/sunxi-ccu.txt | 1 +
drivers/clk/sunxi-ng/Kconfig | 5 +
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 1206 ++++++++++++++++++++
drivers/clk/sunxi-ng/ccu-sun50i-h6.h | 63 +
include/dt-bindings/clock/sun50i-h6-ccu.h | 159 +++
include/dt-bindings/reset/sun50i-h6-ccu.h | 110 ++
7 files changed, 1545 insertions(+)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h6.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h6.h
create mode 100644 include/dt-bindings/clock/sun50i-h6-ccu.h
create mode 100644 include/dt-bindings/reset/sun50i-h6-ccu.h
diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index 4ca21c3a6fc9..9ae27881c924 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -20,6 +20,7 @@ Required properties :
- "allwinner,sun50i-a64-ccu"
- "allwinner,sun50i-a64-r-ccu"
- "allwinner,sun50i-h5-ccu"
+ - "allwinner,sun50i-h6-ccu"
- "nextthing,gr8-ccu"
- reg: Must contain the registers base address and length
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 6427d0ebe2de..4bc196a49b12 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -11,6 +11,11 @@ config SUN50I_A64_CCU
default ARM64 && ARCH_SUNXI
depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
+config SUN50I_H6_CCU
+ bool "Support for the Allwinner H6 CCU"
+ default ARM64 && ARCH_SUNXI
+ depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
+
config SUN4I_A10_CCU
bool "Support for the Allwinner A10/A20 CCU"
select SUNXI_CCU_DIV
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 4141c3fe08ae..128a40ee5c5e 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -22,6 +22,7 @@ lib-$(CONFIG_SUNXI_CCU) += ccu_mp.o
# SoC support
obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-a64.o
+obj-$(CONFIG_SUN50I_H6_CCU) += ccu-sun50i-h6.o
obj-$(CONFIG_SUN4I_A10_CCU) += ccu-sun4i-a10.o
obj-$(CONFIG_SUN5I_CCU) += ccu-sun5i.o
obj-$(CONFIG_SUN6I_A31_CCU) += ccu-sun6i-a31.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
new file mode 100644
index 000000000000..18a1e08e7260
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
@@ -0,0 +1,1206 @@
+/*
+ * Copyright (c) 2017 Icenowy Zheng <icenowy at aosc.io>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+
+#include "ccu-sun50i-h6.h"
+
+/*
+ * The CPU PLL is actually NP clock, with P being /1, /2 or /4. However
+ * P should only be used for output frequencies lower than 288 MHz.
+ *
+ * For now we can just model it as a multiplier clock, and force P to /1.
+ *
+ * The M factor is present in the register's description, but not in the
+ * frequency formula, and it's documented as "M is only used for backdoor
+ * testing", so it's not modelled and then force to 0.
+ */
+#define SUN50I_H6_PLL_CPUX_REG 0x000
+static struct ccu_mult pll_cpux_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .mult = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .common = {
+ .reg = 0x000,
+ .hw.init = CLK_HW_INIT("pll-cpux", "osc24M",
+ &ccu_mult_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+/* Some PLLs are input * N / div1 / P. Model them as NKMP with no K */
+#define SUN50I_H6_PLL_DDR0_REG 0x010
+static struct ccu_nkmp pll_ddr0_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
+ .common = {
+ .reg = 0x010,
+ .hw.init = CLK_HW_INIT("pll-ddr0", "osc24M",
+ &ccu_nkmp_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+#define SUN50I_H6_PLL_PERIPH0_REG 0x020
+static struct ccu_nkmp pll_periph0_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
+ .fixed_post_div = 4,
+ .common = {
+ .reg = 0x020,
+ .features = CCU_FEATURE_FIXED_POSTDIV,
+ .hw.init = CLK_HW_INIT("pll-periph0", "osc24M",
+ &ccu_nkmp_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+#define SUN50I_H6_PLL_PERIPH1_REG 0x028
+static struct ccu_nkmp pll_periph1_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
+ .fixed_post_div = 4,
+ .common = {
+ .reg = 0x028,
+ .features = CCU_FEATURE_FIXED_POSTDIV,
+ .hw.init = CLK_HW_INIT("pll-periph1", "osc24M",
+ &ccu_nkmp_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+#define SUN50I_H6_PLL_GPU_REG 0x030
+static struct ccu_nkmp pll_gpu_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
+ .common = {
+ .reg = 0x030,
+ .hw.init = CLK_HW_INIT("pll-gpu", "osc24M",
+ &ccu_nkmp_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+/*
+ * For Video PLLs, the output divider is described as "used for testing"
+ * in the user manual. So it's not modelled and forced to 0.
+ */
+#define SUN50I_H6_PLL_VIDEO0_REG 0x040
+static struct ccu_nm pll_video0_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .fixed_post_div = 4,
+ .common = {
+ .reg = 0x040,
+ .features = CCU_FEATURE_FIXED_POSTDIV,
+ .hw.init = CLK_HW_INIT("pll-video0", "osc24M",
+ &ccu_nm_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+#define SUN50I_H6_PLL_VIDEO1_REG 0x048
+static struct ccu_nm pll_video1_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .fixed_post_div = 4,
+ .common = {
+ .reg = 0x048,
+ .features = CCU_FEATURE_FIXED_POSTDIV,
+ .hw.init = CLK_HW_INIT("pll-video1", "osc24M",
+ &ccu_nm_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+#define SUN50I_H6_PLL_VE_REG 0x058
+static struct ccu_nkmp pll_ve_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
+ .common = {
+ .reg = 0x058,
+ .hw.init = CLK_HW_INIT("pll-ve", "osc24M",
+ &ccu_nkmp_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+#define SUN50I_H6_PLL_DE_REG 0x060
+static struct ccu_nkmp pll_de_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
+ .common = {
+ .reg = 0x060,
+ .hw.init = CLK_HW_INIT("pll-de", "osc24M",
+ &ccu_nkmp_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+#define SUN50I_H6_PLL_HSIC_REG 0x070
+static struct ccu_nkmp pll_hsic_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
+ .common = {
+ .reg = 0x070,
+ .hw.init = CLK_HW_INIT("pll-hsic", "osc24M",
+ &ccu_nkmp_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+/*
+ * The Audio PLL is supposed to have 3 outputs: 2 fixed factors from
+ * the base (2x and 4x), and one variable divider (the one true pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names.
+ */
+#define SUN50I_H6_PLL_AUDIO_REG 0x078
+static struct ccu_nm pll_audio_base_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .common = {
+ .reg = 0x078,
+ .hw.init = CLK_HW_INIT("pll-audio-base", "osc24M",
+ &ccu_nm_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+static const char * const cpux_parents[] = { "osc24M", "osc32k",
+ "iosc", "pll-cpux" };
+static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
+ 0x500, 24, 2, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x500, 0, 2, 0);
+static SUNXI_CCU_M(cpux_apb_clk, "cpux-apb", "cpux", 0x500, 8, 2, 0);
+
+static const char * const psi_ahb1_ahb2_parents[] = { "osc24M", "osc32k",
+ "iosc", "pll-periph0" };
+static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2",
+ psi_ahb1_ahb2_parents,
+ 0x510,
+ 0, 5, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ 0);
+
+static const char * const ahb3_apb1_apb2_parents[] = { "osc24M", "osc32k",
+ "psi-ahb1-ahb2",
+ "pll-periph0" };
+static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3", ahb3_apb1_apb2_parents, 0x51c,
+ 0, 5, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", ahb3_apb1_apb2_parents, 0x520,
+ 0, 5, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", ahb3_apb1_apb2_parents, 0x524,
+ 0, 5, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ 0);
+
+static const char * const mbus_parents[] = { "osc24M", "pll-periph0",
+ "pll-ddr0", "pll-periph0-4x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, 0x540,
+ 0, 3, /* M */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ CLK_IS_CRITICAL);
+
+static const char * const de_parents[] = { "pll-de", "pll-periph0-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents, 0x600,
+ 0, 4, /* M */
+ 24, 1, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "psi-ahb1-ahb2",
+ 0x60c, BIT(0), 0);
+
+static const char * const deinterlace_parents[] = { "pll-periph0",
+ "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace",
+ deinterlace_parents,
+ 0x620,
+ 0, 4, /* M */
+ 24, 1, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "psi-ahb1-ahb2",
+ 0x62c, BIT(0), 0);
+
+static const char * const gpu_parents[] = { "pll-gpu" };
+static SUNXI_CCU_M_WITH_MUX_GATE(gpu_clk, "gpu", gpu_parents, 0x670,
+ 0, 3, /* M */
+ 24, 1, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "psi-ahb1-ahb2",
+ 0x67c, BIT(0), 0);
+
+/* Also applies to EMCE */
+static const char * const ce_parents[] = { "osc24M", "pll-periph0-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x680,
+ 0, 4, /* M */
+ 8, 2, /* N */
+ 24, 1, /* mux */
+ BIT(31),/* gate */
+ 0);
+
+static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "psi-ahb1-ahb2",
+ 0x68c, BIT(0), 0);
+
+static const char * const ve_parents[] = { "pll-ve" };
+static SUNXI_CCU_M_WITH_MUX_GATE(ve_clk, "ve", ve_parents, 0x690,
+ 0, 3, /* M */
+ 24, 1, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "psi-ahb1-ahb2",
+ 0x69c, BIT(0), 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(emce_clk, "emce", ce_parents, 0x6b0,
+ 0, 4, /* M */
+ 8, 2, /* N */
+ 24, 1, /* mux */
+ BIT(31),/* gate */
+ 0);
+
+static SUNXI_CCU_GATE(bus_emce_clk, "bus-emce", "psi-ahb1-ahb2",
+ 0x6bc, BIT(0), 0);
+
+static const char * const vp9_parents[] = { "pll-ve", "pll-periph0-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(vp9_clk, "vp9", vp9_parents, 0x6c0,
+ 0, 3, /* M */
+ 24, 1, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE(bus_vp9_clk, "bus-vp9", "psi-ahb1-ahb2",
+ 0x6cc, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "psi-ahb1-ahb2",
+ 0x70c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "psi-ahb1-ahb2",
+ 0x71c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "psi-ahb1-ahb2",
+ 0x72c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "psi-ahb1-ahb2",
+ 0x73c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M", 0x740, BIT(31), 0);
+
+static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "psi-ahb1-ahb2",
+ 0x78c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_psi_clk, "bus-psi", "psi-ahb1-ahb2",
+ 0x79c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_pwm_clk, "bus-pwm", "apb1", 0x79c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_iommu_clk, "bus-iommu", "apb1", 0x7bc, BIT(0), 0);
+
+static const char * const dram_parents[] = { "pll-ddr0" };
+static struct ccu_div dram_clk = {
+ .div = _SUNXI_CCU_DIV(0, 2),
+ .mux = _SUNXI_CCU_MUX(24, 2),
+ .common = {
+ .reg = 0x800,
+ .hw.init = CLK_HW_INIT_PARENTS("dram",
+ dram_parents,
+ &ccu_div_ops,
+ CLK_IS_CRITICAL),
+ },
+};
+
+static SUNXI_CCU_GATE(mbus_dma_clk, "mbus-dma", "mbus",
+ 0x804, BIT(0), 0);
+static SUNXI_CCU_GATE(mbus_ve_clk, "mbus-ve", "mbus",
+ 0x804, BIT(1), 0);
+static SUNXI_CCU_GATE(mbus_ce_clk, "mbus-ce", "mbus",
+ 0x804, BIT(2), 0);
+static SUNXI_CCU_GATE(mbus_ts_clk, "mbus-ts", "mbus",
+ 0x804, BIT(3), 0);
+static SUNXI_CCU_GATE(mbus_nand_clk, "mbus-nand", "mbus",
+ 0x804, BIT(5), 0);
+static SUNXI_CCU_GATE(mbus_csi_clk, "mbus-csi", "mbus",
+ 0x804, BIT(8), 0);
+static SUNXI_CCU_GATE(mbus_deinterlace_clk, "mbus-deinterlace", "mbus",
+ 0x804, BIT(11), 0);
+
+static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "psi-ahb1-ahb2",
+ 0x80c, BIT(0), CLK_IS_CRITICAL);
+
+static const char * const nand_spi_parents[] = { "osc24M", "pll-periph0",
+ "pll-periph1", "pll-periph0-2x",
+ "pll-periph1-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand0_clk, "nand0", nand_spi_parents, 0x810,
+ 0, 4, /* M */
+ 8, 2, /* N */
+ 24, 3, /* mux */
+ BIT(31),/* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand1_clk, "nand1", nand_spi_parents, 0x814,
+ 0, 4, /* M */
+ 8, 2, /* N */
+ 24, 3, /* mux */
+ BIT(31),/* gate */
+ 0);
+
+static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb3", 0x82c, BIT(0), 0);
+
+static const char * const mmc_parents[] = { "osc24M", "pll-periph0-2x",
+ "pll-periph1-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mmc_parents, 0x830,
+ 0, 4, /* M */
+ 8, 2, /* N */
+ 24, 3, /* mux */
+ BIT(31),/* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mmc_parents, 0x834,
+ 0, 4, /* M */
+ 8, 2, /* N */
+ 24, 3, /* mux */
+ BIT(31),/* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mmc_parents, 0x838,
+ 0, 4, /* M */
+ 8, 2, /* N */
+ 24, 3, /* mux */
+ BIT(31),/* gate */
+ 0);
+
+static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb3", 0x84c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb3", 0x84c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb3", 0x84c, BIT(2), 0);
+
+static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2", 0x90c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2", 0x90c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2", 0x90c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2", 0x90c, BIT(3), 0);
+
+static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2", 0x91c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2", 0x91c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2", 0x91c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb2", 0x91c, BIT(3), 0);
+
+static SUNXI_CCU_GATE(bus_scr0_clk, "bus-scr0", "apb2", 0x93c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_scr1_clk, "bus-scr1", "apb2", 0x93c, BIT(1), 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", nand_spi_parents, 0x940,
+ 0, 4, /* M */
+ 8, 2, /* N */
+ 24, 3, /* mux */
+ BIT(31),/* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", nand_spi_parents, 0x944,
+ 0, 4, /* M */
+ 8, 2, /* N */
+ 24, 3, /* mux */
+ BIT(31),/* gate */
+ 0);
+
+static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb3", 0x96c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb3", 0x96c, BIT(1), 0);
+
+static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb3", 0x97c, BIT(0), 0);
+
+static const char * const ts_parents[] = { "osc24M", "pll-periph0" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x9b0,
+ 0, 4, /* M */
+ 8, 2, /* N */
+ 24, 1, /* mux */
+ BIT(31),/* gate */
+ 0);
+
+static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb3", 0x9bc, BIT(0), 0);
+
+static const char * const ir_tx_parents[] = { "osc32k", "osc24M" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir_tx_clk, "ir-tx", ir_tx_parents, 0x9c0,
+ 0, 4, /* M */
+ 8, 2, /* N */
+ 24, 1, /* mux */
+ BIT(31),/* gate */
+ 0);
+
+static SUNXI_CCU_GATE(bus_ir_tx_clk, "bus-ir-tx", "apb1", 0x9cc, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1", 0x9fc, BIT(0), 0);
+
+static const char * const audio_parents[] = { "pll-audio", "pll-audio-2x", "pll-audio-4x" };
+static struct ccu_div i2s3_clk = {
+ .enable = BIT(31),
+ .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .mux = _SUNXI_CCU_MUX(24, 2),
+ .common = {
+ .reg = 0xa0c,
+ .hw.init = CLK_HW_INIT_PARENTS("i2s3",
+ audio_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct ccu_div i2s0_clk = {
+ .enable = BIT(31),
+ .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .mux = _SUNXI_CCU_MUX(24, 2),
+ .common = {
+ .reg = 0xa10,
+ .hw.init = CLK_HW_INIT_PARENTS("i2s0",
+ audio_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct ccu_div i2s1_clk = {
+ .enable = BIT(31),
+ .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .mux = _SUNXI_CCU_MUX(24, 2),
+ .common = {
+ .reg = 0xa14,
+ .hw.init = CLK_HW_INIT_PARENTS("i2s1",
+ audio_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct ccu_div i2s2_clk = {
+ .enable = BIT(31),
+ .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .mux = _SUNXI_CCU_MUX(24, 2),
+ .common = {
+ .reg = 0xa18,
+ .hw.init = CLK_HW_INIT_PARENTS("i2s2",
+ audio_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1", 0xa1c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1", 0xa1c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_i2s2_clk, "bus-i2s2", "apb1", 0xa1c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_i2s3_clk, "bus-i2s3", "apb1", 0xa1c, BIT(3), 0);
+
+static struct ccu_div spdif_clk = {
+ .enable = BIT(31),
+ .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .mux = _SUNXI_CCU_MUX(24, 2),
+ .common = {
+ .reg = 0xa20,
+ .hw.init = CLK_HW_INIT_PARENTS("spdif",
+ audio_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1", 0xa2c, BIT(0), 0);
+
+static struct ccu_div dmic_clk = {
+ .enable = BIT(31),
+ .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .mux = _SUNXI_CCU_MUX(24, 2),
+ .common = {
+ .reg = 0xa40,
+ .hw.init = CLK_HW_INIT_PARENTS("dmic",
+ audio_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_GATE(bus_dmic_clk, "bus-dmic", "apb1", 0xa4c, BIT(0), 0);
+
+static struct ccu_div audio_hub_clk = {
+ .enable = BIT(31),
+ .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .mux = _SUNXI_CCU_MUX(24, 2),
+ .common = {
+ .reg = 0xa60,
+ .hw.init = CLK_HW_INIT_PARENTS("audio-hub",
+ audio_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_GATE(bus_audio_hub_clk, "bus-audio-hub", "apb1", 0xa6c, BIT(0), 0);
+
+/*
+ * There are OHCI 12M clock source selection bits for 2 USB 2.0 ports.
+ * We will force them to 0 (12M divided from 48M).
+ */
+#define SUN50I_H6_USB0_CLK_REG 0xa70
+#define SUN50I_H6_USB3_CLK_REG 0xa7c
+
+static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M", 0xa70, BIT(31), 0);
+static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M", 0xa70, BIT(29), 0);
+
+static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M", 0xa74, BIT(29), 0);
+
+static SUNXI_CCU_GATE(usb_ohci3_clk, "usb-ohci3", "osc12M", 0xa7c, BIT(31), 0);
+static SUNXI_CCU_GATE(usb_phy3_clk, "usb-phy3", "osc12M", 0xa7c, BIT(29), 0);
+static SUNXI_CCU_GATE(usb_hsic_12m_clk, "usb-hsic-12M", "osc12M", 0xa7c, BIT(27), 0);
+static SUNXI_CCU_GATE(usb_hsic_clk, "usb-hsic", "pll-hsic", 0xa7c, BIT(26), 0);
+
+static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb3", 0xa8c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_ohci3_clk, "bus-ohci3", "ahb3", 0xa8c, BIT(3), 0);
+static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb3", 0xa8c, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_xhci_clk, "bus-xhci", "ahb3", 0xa8c, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_ehci3_clk, "bus-ehci3", "ahb3", 0xa8c, BIT(7), 0);
+static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb3", 0xa8c, BIT(8), 0);
+
+static CLK_FIXED_FACTOR(pcie_ref_100m_clk, "pcie-ref-100M",
+ "pll-periph0-4x", 24, 1, 0);
+static SUNXI_CCU_GATE(pcie_ref_clk, "pcie-ref", "pcie-ref-100M",
+ 0xab0, BIT(31), 0);
+static SUNXI_CCU_GATE(pcie_ref_out_clk, "pcie-ref-out", "pcie-ref",
+ 0xab0, BIT(30), 0);
+
+static SUNXI_CCU_M_WITH_GATE(pcie_maxi_clk, "pcie-maxi",
+ "pll-periph0", 0xab4,
+ 0, 4, /* M */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_M_WITH_GATE(pcie_aux_clk, "pcie-aux", "osc24M", 0xab8,
+ 0, 5, /* M */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE(bus_pcie_clk, "bus-pcie", "psi-ahb1-ahb2",
+ 0xabc, BIT(0), 0);
+
+static const char * const hdmi_parents[] = { "pll-video0", "pll-video1",
+ "pll-video1-4x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents, 0xb00,
+ 0, 4, /* M */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const hdmi_cec_parents[] = { "osc32k", "pll-periph0-2x" };
+static const struct ccu_mux_fixed_prediv hdmi_cec_predivs[] = {
+ { .index = 1, .div = 36621 },
+};
+static struct ccu_mux hdmi_cec_clk = {
+ .enable = BIT(31),
+
+ .mux = {
+ .shift = 24,
+ .width = 2,
+
+ .fixed_predivs = hdmi_cec_predivs,
+ .n_predivs = ARRAY_SIZE(hdmi_cec_predivs),
+ },
+
+ .common = {
+ .reg = 0xb10,
+ .features = CCU_FEATURE_VARIABLE_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("hdmi-cec",
+ hdmi_cec_parents,
+ &ccu_mux_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb3", 0xb1c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_tcon_top_clk, "bus-tcon-top", "ahb3",
+ 0xb5c, BIT(0), 0);
+
+static const char * const tcon_lcd0_parents[] = { "pll-video0",
+ "pll-video0-4x",
+ "pll-video1" };
+static SUNXI_CCU_MUX_WITH_GATE(tcon_lcd0_clk, "tcon-lcd0",
+ tcon_lcd0_parents, 0xb60,
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE(bus_tcon_lcd0_clk, "bus-tcon-lcd0", "ahb3",
+ 0xb7c, BIT(0), 0);
+
+static const char * const tcon_tv0_parents[] = { "pll-video0",
+ "pll-video0-4x",
+ "pll-video1",
+ "pll-video1-4x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_tv0_clk, "tcon-tv0",
+ tcon_tv0_parents, 0xb80,
+ 0, 4, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE(bus_tcon_tv0_clk, "bus-tcon-tv0", "ahb3",
+ 0xb9c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(csi_cci_clk, "csi-cci", "osc24M", 0xc00, BIT(0), 0);
+
+static const char * const csi_top_parents[] = { "pll-video0", "pll-ve",
+ "pll-periph0" };
+static const u8 csi_top_table[] = { 0, 2, 3 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi_top_clk, "csi-top",
+ csi_top_parents, csi_top_table, 0xc04,
+ 0, 4, /* M */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const csi_mclk_parents[] = { "osc24M", "pll-video0",
+ "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi_mclk_clk, "csi-mclk",
+ csi_mclk_parents, 0xc08,
+ 0, 5, /* M */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb3", 0xc2c, BIT(0), 0);
+
+static const char * const hdcp_parents[] = { "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdcp_clk, "hdcp", hdcp_parents, 0xc40,
+ 0, 4, /* M */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE(bus_hdcp_clk, "bus-hdcp", "ahb3", 0xc4c, BIT(0), 0);
+
+/* Fixed factor clocks */
+static CLK_FIXED_FACTOR(osc12M_clk, "osc12M", "osc24M", 2, 1, 0);
+
+/*
+ * The divider of pll-audio is fixed to 8 now, as pll-audio-4x has a
+ * fixed post-divider 2.
+ */
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+ "pll-audio-base", 8, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+ "pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+ "pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+
+static CLK_FIXED_FACTOR(pll_periph0_4x_clk, "pll-periph0-4x",
+ "pll-periph0", 1, 4, 0);
+static CLK_FIXED_FACTOR(pll_periph0_2x_clk, "pll-periph0-2x",
+ "pll-periph0", 1, 2, 0);
+
+static CLK_FIXED_FACTOR(pll_periph1_4x_clk, "pll-periph1-4x",
+ "pll-periph1", 1, 4, 0);
+static CLK_FIXED_FACTOR(pll_periph1_2x_clk, "pll-periph1-2x",
+ "pll-periph1", 1, 2, 0);
+
+static CLK_FIXED_FACTOR(pll_video0_4x_clk, "pll-video0-4x",
+ "pll-video0", 1, 4, CLK_SET_RATE_PARENT);
+
+static CLK_FIXED_FACTOR(pll_video1_4x_clk, "pll-video1-4x",
+ "pll-video1", 1, 4, CLK_SET_RATE_PARENT);
+
+static struct ccu_common *sun50i_h6_ccu_clks[] = {
+ &pll_cpux_clk.common,
+ &pll_ddr0_clk.common,
+ &pll_periph0_clk.common,
+ &pll_periph1_clk.common,
+ &pll_gpu_clk.common,
+ &pll_video0_clk.common,
+ &pll_video1_clk.common,
+ &pll_ve_clk.common,
+ &pll_de_clk.common,
+ &pll_hsic_clk.common,
+ &pll_audio_base_clk.common,
+ &cpux_clk.common,
+ &axi_clk.common,
+ &cpux_apb_clk.common,
+ &psi_ahb1_ahb2_clk.common,
+ &ahb3_clk.common,
+ &apb1_clk.common,
+ &apb2_clk.common,
+ &mbus_clk.common,
+ &de_clk.common,
+ &bus_de_clk.common,
+ &deinterlace_clk.common,
+ &bus_deinterlace_clk.common,
+ &gpu_clk.common,
+ &bus_gpu_clk.common,
+ &ce_clk.common,
+ &bus_ce_clk.common,
+ &ve_clk.common,
+ &bus_ve_clk.common,
+ &emce_clk.common,
+ &bus_emce_clk.common,
+ &vp9_clk.common,
+ &bus_vp9_clk.common,
+ &bus_dma_clk.common,
+ &bus_msgbox_clk.common,
+ &bus_spinlock_clk.common,
+ &bus_hstimer_clk.common,
+ &avs_clk.common,
+ &bus_dbg_clk.common,
+ &bus_psi_clk.common,
+ &bus_pwm_clk.common,
+ &bus_iommu_clk.common,
+ &dram_clk.common,
+ &mbus_dma_clk.common,
+ &mbus_ve_clk.common,
+ &mbus_ce_clk.common,
+ &mbus_ts_clk.common,
+ &mbus_nand_clk.common,
+ &mbus_csi_clk.common,
+ &mbus_deinterlace_clk.common,
+ &bus_dram_clk.common,
+ &nand0_clk.common,
+ &nand1_clk.common,
+ &bus_nand_clk.common,
+ &mmc0_clk.common,
+ &mmc1_clk.common,
+ &mmc2_clk.common,
+ &bus_mmc0_clk.common,
+ &bus_mmc1_clk.common,
+ &bus_mmc2_clk.common,
+ &bus_uart0_clk.common,
+ &bus_uart1_clk.common,
+ &bus_uart2_clk.common,
+ &bus_uart3_clk.common,
+ &bus_i2c0_clk.common,
+ &bus_i2c1_clk.common,
+ &bus_i2c2_clk.common,
+ &bus_i2c3_clk.common,
+ &bus_scr0_clk.common,
+ &bus_scr1_clk.common,
+ &spi0_clk.common,
+ &spi1_clk.common,
+ &bus_spi0_clk.common,
+ &bus_spi1_clk.common,
+ &bus_emac_clk.common,
+ &ts_clk.common,
+ &bus_ts_clk.common,
+ &ir_tx_clk.common,
+ &bus_ir_tx_clk.common,
+ &bus_ths_clk.common,
+ &i2s3_clk.common,
+ &i2s0_clk.common,
+ &i2s1_clk.common,
+ &i2s2_clk.common,
+ &bus_i2s0_clk.common,
+ &bus_i2s1_clk.common,
+ &bus_i2s2_clk.common,
+ &bus_i2s3_clk.common,
+ &spdif_clk.common,
+ &bus_spdif_clk.common,
+ &dmic_clk.common,
+ &bus_dmic_clk.common,
+ &audio_hub_clk.common,
+ &bus_audio_hub_clk.common,
+ &usb_ohci0_clk.common,
+ &usb_phy0_clk.common,
+ &usb_phy1_clk.common,
+ &usb_ohci3_clk.common,
+ &usb_phy3_clk.common,
+ &usb_hsic_12m_clk.common,
+ &usb_hsic_clk.common,
+ &bus_ohci0_clk.common,
+ &bus_ohci3_clk.common,
+ &bus_ehci0_clk.common,
+ &bus_xhci_clk.common,
+ &bus_ehci3_clk.common,
+ &bus_otg_clk.common,
+ &pcie_ref_clk.common,
+ &pcie_ref_out_clk.common,
+ &pcie_maxi_clk.common,
+ &pcie_aux_clk.common,
+ &bus_pcie_clk.common,
+ &hdmi_clk.common,
+ &hdmi_cec_clk.common,
+ &bus_hdmi_clk.common,
+ &bus_tcon_top_clk.common,
+ &tcon_lcd0_clk.common,
+ &bus_tcon_lcd0_clk.common,
+ &tcon_tv0_clk.common,
+ &bus_tcon_tv0_clk.common,
+ &csi_cci_clk.common,
+ &csi_top_clk.common,
+ &csi_mclk_clk.common,
+ &bus_csi_clk.common,
+ &hdcp_clk.common,
+ &bus_hdcp_clk.common,
+};
+
+static struct clk_hw_onecell_data sun50i_h6_hw_clks = {
+ .hws = {
+ [CLK_OSC12M] = &osc12M_clk.hw,
+ [CLK_PLL_CPUX] = &pll_cpux_clk.common.hw,
+ [CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
+ [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
+ [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
+ [CLK_PLL_PERIPH0_4X] = &pll_periph0_4x_clk.hw,
+ [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
+ [CLK_PLL_PERIPH1_2X] = &pll_periph1_2x_clk.hw,
+ [CLK_PLL_PERIPH1_4X] = &pll_periph1_4x_clk.hw,
+ [CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
+ [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
+ [CLK_PLL_VIDEO0_4X] = &pll_video0_4x_clk.hw,
+ [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
+ [CLK_PLL_VIDEO1_4X] = &pll_video1_4x_clk.hw,
+ [CLK_PLL_VE] = &pll_ve_clk.common.hw,
+ [CLK_PLL_DE] = &pll_de_clk.common.hw,
+ [CLK_PLL_HSIC] = &pll_hsic_clk.common.hw,
+ [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
+ [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
+ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
+ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
+ [CLK_CPUX] = &cpux_clk.common.hw,
+ [CLK_AXI] = &axi_clk.common.hw,
+ [CLK_CPUX_APB] = &cpux_apb_clk.common.hw,
+ [CLK_PSI_AHB1_AHB2] = &psi_ahb1_ahb2_clk.common.hw,
+ [CLK_AHB3] = &ahb3_clk.common.hw,
+ [CLK_APB1] = &apb1_clk.common.hw,
+ [CLK_APB2] = &apb2_clk.common.hw,
+ [CLK_MBUS] = &mbus_clk.common.hw,
+ [CLK_DE] = &de_clk.common.hw,
+ [CLK_BUS_DE] = &bus_de_clk.common.hw,
+ [CLK_DEINTERLACE] = &deinterlace_clk.common.hw,
+ [CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common.hw,
+ [CLK_GPU] = &gpu_clk.common.hw,
+ [CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
+ [CLK_CE] = &ce_clk.common.hw,
+ [CLK_BUS_CE] = &bus_ce_clk.common.hw,
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_BUS_VE] = &bus_ve_clk.common.hw,
+ [CLK_EMCE] = &emce_clk.common.hw,
+ [CLK_BUS_EMCE] = &bus_emce_clk.common.hw,
+ [CLK_VP9] = &vp9_clk.common.hw,
+ [CLK_BUS_VP9] = &bus_vp9_clk.common.hw,
+ [CLK_BUS_DMA] = &bus_dma_clk.common.hw,
+ [CLK_BUS_MSGBOX] = &bus_msgbox_clk.common.hw,
+ [CLK_BUS_SPINLOCK] = &bus_spinlock_clk.common.hw,
+ [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ [CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
+ [CLK_BUS_PSI] = &bus_psi_clk.common.hw,
+ [CLK_BUS_PWM] = &bus_pwm_clk.common.hw,
+ [CLK_BUS_IOMMU] = &bus_iommu_clk.common.hw,
+ [CLK_DRAM] = &dram_clk.common.hw,
+ [CLK_MBUS_DMA] = &mbus_dma_clk.common.hw,
+ [CLK_MBUS_VE] = &mbus_ve_clk.common.hw,
+ [CLK_MBUS_CE] = &mbus_ce_clk.common.hw,
+ [CLK_MBUS_TS] = &mbus_ts_clk.common.hw,
+ [CLK_MBUS_NAND] = &mbus_nand_clk.common.hw,
+ [CLK_MBUS_CSI] = &mbus_csi_clk.common.hw,
+ [CLK_MBUS_DEINTERLACE] = &mbus_deinterlace_clk.common.hw,
+ [CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
+ [CLK_NAND0] = &nand0_clk.common.hw,
+ [CLK_NAND1] = &nand1_clk.common.hw,
+ [CLK_BUS_NAND] = &bus_nand_clk.common.hw,
+ [CLK_MMC0] = &mmc0_clk.common.hw,
+ [CLK_MMC1] = &mmc1_clk.common.hw,
+ [CLK_MMC2] = &mmc2_clk.common.hw,
+ [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
+ [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
+ [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
+ [CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
+ [CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
+ [CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
+ [CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
+ [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
+ [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
+ [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
+ [CLK_BUS_I2C3] = &bus_i2c3_clk.common.hw,
+ [CLK_BUS_SCR0] = &bus_scr0_clk.common.hw,
+ [CLK_BUS_SCR1] = &bus_scr1_clk.common.hw,
+ [CLK_SPI0] = &spi0_clk.common.hw,
+ [CLK_SPI1] = &spi1_clk.common.hw,
+ [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
+ [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
+ [CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
+ [CLK_TS] = &ts_clk.common.hw,
+ [CLK_BUS_TS] = &bus_ts_clk.common.hw,
+ [CLK_IR_TX] = &ir_tx_clk.common.hw,
+ [CLK_BUS_IR_TX] = &bus_ir_tx_clk.common.hw,
+ [CLK_BUS_THS] = &bus_ths_clk.common.hw,
+ [CLK_I2S3] = &i2s3_clk.common.hw,
+ [CLK_I2S0] = &i2s0_clk.common.hw,
+ [CLK_I2S1] = &i2s1_clk.common.hw,
+ [CLK_I2S2] = &i2s2_clk.common.hw,
+ [CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
+ [CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw,
+ [CLK_BUS_I2S2] = &bus_i2s2_clk.common.hw,
+ [CLK_BUS_I2S3] = &bus_i2s3_clk.common.hw,
+ [CLK_SPDIF] = &spdif_clk.common.hw,
+ [CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
+ [CLK_DMIC] = &dmic_clk.common.hw,
+ [CLK_BUS_DMIC] = &bus_dmic_clk.common.hw,
+ [CLK_AUDIO_HUB] = &audio_hub_clk.common.hw,
+ [CLK_BUS_AUDIO_HUB] = &bus_audio_hub_clk.common.hw,
+ [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
+ [CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
+ [CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
+ [CLK_USB_OHCI3] = &usb_ohci3_clk.common.hw,
+ [CLK_USB_PHY3] = &usb_phy3_clk.common.hw,
+ [CLK_USB_HSIC_12M] = &usb_hsic_12m_clk.common.hw,
+ [CLK_USB_HSIC] = &usb_hsic_clk.common.hw,
+ [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
+ [CLK_BUS_OHCI3] = &bus_ohci3_clk.common.hw,
+ [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
+ [CLK_BUS_XHCI] = &bus_xhci_clk.common.hw,
+ [CLK_BUS_EHCI3] = &bus_ehci3_clk.common.hw,
+ [CLK_BUS_OTG] = &bus_otg_clk.common.hw,
+ [CLK_PCIE_REF_100M] = &pcie_ref_100m_clk.hw,
+ [CLK_PCIE_REF] = &pcie_ref_clk.common.hw,
+ [CLK_PCIE_REF_OUT] = &pcie_ref_out_clk.common.hw,
+ [CLK_PCIE_MAXI] = &pcie_maxi_clk.common.hw,
+ [CLK_PCIE_AUX] = &pcie_aux_clk.common.hw,
+ [CLK_BUS_PCIE] = &bus_pcie_clk.common.hw,
+ [CLK_HDMI] = &hdmi_clk.common.hw,
+ [CLK_HDMI_CEC] = &hdmi_cec_clk.common.hw,
+ [CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw,
+ [CLK_BUS_TCON_TOP] = &bus_tcon_top_clk.common.hw,
+ [CLK_TCON_LCD0] = &tcon_lcd0_clk.common.hw,
+ [CLK_BUS_TCON_LCD0] = &bus_tcon_lcd0_clk.common.hw,
+ [CLK_TCON_TV0] = &tcon_tv0_clk.common.hw,
+ [CLK_BUS_TCON_TV0] = &bus_tcon_tv0_clk.common.hw,
+ [CLK_CSI_CCI] = &csi_cci_clk.common.hw,
+ [CLK_CSI_TOP] = &csi_top_clk.common.hw,
+ [CLK_CSI_MCLK] = &csi_mclk_clk.common.hw,
+ [CLK_BUS_CSI] = &bus_csi_clk.common.hw,
+ [CLK_HDCP] = &hdcp_clk.common.hw,
+ [CLK_BUS_HDCP] = &bus_hdcp_clk.common.hw,
+ },
+ .num = CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun50i_h6_ccu_resets[] = {
+ [RST_MBUS] = { 0x540, BIT(30) },
+
+ [RST_BUS_DE] = { 0x60c, BIT(16) },
+ [RST_BUS_DEINTERLACE] = { 0x62c, BIT(16) },
+ [RST_BUS_GPU] = { 0x67c, BIT(16) },
+ [RST_BUS_CE] = { 0x68c, BIT(16) },
+ [RST_BUS_VE] = { 0x69c, BIT(16) },
+ [RST_BUS_EMCE] = { 0x6bc, BIT(16) },
+ [RST_BUS_VP9] = { 0x6cc, BIT(16) },
+ [RST_BUS_DMA] = { 0x70c, BIT(16) },
+ [RST_BUS_MSGBOX] = { 0x71c, BIT(16) },
+ [RST_BUS_SPINLOCK] = { 0x72c, BIT(16) },
+ [RST_BUS_HSTIMER] = { 0x73c, BIT(16) },
+ [RST_BUS_DBG] = { 0x78c, BIT(16) },
+ [RST_BUS_PSI] = { 0x79c, BIT(16) },
+ [RST_BUS_PWM] = { 0x7ac, BIT(16) },
+ [RST_BUS_IOMMU] = { 0x7bc, BIT(16) },
+ [RST_BUS_DRAM] = { 0x80c, BIT(16) },
+ [RST_BUS_NAND] = { 0x82c, BIT(16) },
+ [RST_BUS_MMC0] = { 0x84c, BIT(16) },
+ [RST_BUS_MMC1] = { 0x84c, BIT(17) },
+ [RST_BUS_MMC2] = { 0x84c, BIT(18) },
+ [RST_BUS_UART0] = { 0x90c, BIT(16) },
+ [RST_BUS_UART1] = { 0x90c, BIT(17) },
+ [RST_BUS_UART2] = { 0x90c, BIT(18) },
+ [RST_BUS_UART3] = { 0x90c, BIT(19) },
+ [RST_BUS_I2C0] = { 0x91c, BIT(16) },
+ [RST_BUS_I2C1] = { 0x91c, BIT(17) },
+ [RST_BUS_I2C2] = { 0x91c, BIT(18) },
+ [RST_BUS_I2C3] = { 0x91c, BIT(19) },
+ [RST_BUS_SCR0] = { 0x93c, BIT(16) },
+ [RST_BUS_SCR1] = { 0x93c, BIT(17) },
+ [RST_BUS_SPI0] = { 0x96c, BIT(16) },
+ [RST_BUS_SPI1] = { 0x96c, BIT(17) },
+ [RST_BUS_EMAC] = { 0x97c, BIT(16) },
+ [RST_BUS_TS] = { 0x9bc, BIT(16) },
+ [RST_BUS_IR_TX] = { 0x9cc, BIT(16) },
+ [RST_BUS_THS] = { 0x9fc, BIT(16) },
+ [RST_BUS_I2S0] = { 0xa1c, BIT(16) },
+ [RST_BUS_I2S1] = { 0xa1c, BIT(17) },
+ [RST_BUS_I2S2] = { 0xa1c, BIT(18) },
+ [RST_BUS_I2S3] = { 0xa1c, BIT(19) },
+ [RST_BUS_SPDIF] = { 0xa2c, BIT(16) },
+ [RST_BUS_DMIC] = { 0xa4c, BIT(16) },
+ [RST_BUS_AUDIO_HUB] = { 0xa6c, BIT(16) },
+
+ [RST_USB_PHY0] = { 0xa70, BIT(30) },
+ [RST_USB_PHY1] = { 0xa74, BIT(30) },
+ [RST_USB_PHY3] = { 0xa7c, BIT(30) },
+ [RST_USB_HSIC] = { 0xa7c, BIT(28) },
+
+ [RST_BUS_OHCI0] = { 0xa8c, BIT(16) },
+ [RST_BUS_OHCI3] = { 0xa8c, BIT(19) },
+ [RST_BUS_EHCI0] = { 0xa8c, BIT(20) },
+ [RST_BUS_XHCI] = { 0xa8c, BIT(21) },
+ [RST_BUS_EHCI3] = { 0xa8c, BIT(23) },
+ [RST_BUS_OTG] = { 0xa8c, BIT(24) },
+ [RST_BUS_PCIE] = { 0xabc, BIT(16) },
+
+ [RST_PCIE_POWERUP] = { 0xabc, BIT(17) },
+
+ [RST_BUS_HDMI] = { 0xb1c, BIT(16) },
+ [RST_BUS_HDMI_SUB] = { 0xb1c, BIT(17) },
+ [RST_BUS_TCON_TOP] = { 0xb5c, BIT(16) },
+ [RST_BUS_TCON_LCD0] = { 0xb7c, BIT(16) },
+ [RST_BUS_TCON_TV0] = { 0xb9c, BIT(16) },
+ [RST_BUS_CSI] = { 0xc2c, BIT(16) },
+ [RST_BUS_HDCP] = { 0xc4c, BIT(16) },
+};
+
+static const struct sunxi_ccu_desc sun50i_h6_ccu_desc = {
+ .ccu_clks = sun50i_h6_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun50i_h6_ccu_clks),
+
+ .hw_clks = &sun50i_h6_hw_clks,
+
+ .resets = sun50i_h6_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun50i_h6_ccu_resets),
+};
+
+static const u32 pll_regs[] = {
+ SUN50I_H6_PLL_CPUX_REG,
+ SUN50I_H6_PLL_DDR0_REG,
+ SUN50I_H6_PLL_PERIPH0_REG,
+ SUN50I_H6_PLL_PERIPH1_REG,
+ SUN50I_H6_PLL_GPU_REG,
+ SUN50I_H6_PLL_VIDEO0_REG,
+ SUN50I_H6_PLL_VIDEO1_REG,
+ SUN50I_H6_PLL_VE_REG,
+ SUN50I_H6_PLL_DE_REG,
+ SUN50I_H6_PLL_HSIC_REG,
+ SUN50I_H6_PLL_AUDIO_REG,
+};
+
+static const u32 pll_video_regs[] = {
+ SUN50I_H6_PLL_VIDEO0_REG,
+ SUN50I_H6_PLL_VIDEO1_REG,
+};
+
+static const u32 usb2_clk_regs[] = {
+ SUN50I_H6_USB0_CLK_REG,
+ SUN50I_H6_USB3_CLK_REG,
+};
+
+static int sun50i_h6_ccu_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ void __iomem *reg;
+ u32 val;
+ int i;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ reg = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(reg))
+ return PTR_ERR(reg);
+
+ /* Enable the lock bits on all PLLs */
+ for (i = 0; i < ARRAY_SIZE(pll_regs); i++) {
+ val = readl(reg + pll_regs[i]);
+ val |= BIT(29);
+ writel(val, reg + pll_regs[i]);
+ }
+
+ /* Force the output divider of video PLLs to 0 */
+ for (i = 0; i < ARRAY_SIZE(pll_video_regs); i++) {
+ val = readl(reg + pll_video_regs[i]);
+ val &= ~BIT(0);
+ writel(val, reg + pll_video_regs[i]);
+ }
+
+ /* Force OHCI 12M clock sources to 00 (12MHz divided from 48MHz) */
+ for (i = 0; i < ARRAY_SIZE(usb2_clk_regs); i++) {
+ val = readl(reg + usb2_clk_regs[i]);
+ val &= ~GENMASK(25, 24);
+ writel (val, reg + usb2_clk_regs[i]);
+ }
+
+ /*
+ * Force the post-divider of pll-video to 8 and the output divider
+ * of it to 1.
+ */
+ val = readl(reg + SUN50I_H6_PLL_AUDIO_REG);
+ val &= ~(GENMASK(21, 16) | BIT(0));
+ writel(val | (7 << 16), reg + SUN50I_H6_PLL_AUDIO_REG);
+
+ return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_h6_ccu_desc);
+}
+
+static const struct of_device_id sun50i_h6_ccu_ids[] = {
+ { .compatible = "allwinner,sun50i-h6-ccu" },
+ { }
+};
+
+static struct platform_driver sun50i_h6_ccu_driver = {
+ .probe = sun50i_h6_ccu_probe,
+ .driver = {
+ .name = "sun50i-h6-ccu",
+ .of_match_table = sun50i_h6_ccu_ids,
+ },
+};
+builtin_platform_driver(sun50i_h6_ccu_driver);
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.h b/drivers/clk/sunxi-ng/ccu-sun50i-h6.h
new file mode 100644
index 000000000000..933491248d31
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2016 Icenowy Zheng <icenowy at aosc.io>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN50I_H6_H_
+#define _CCU_SUN50I_H6_H_
+
+#include <dt-bindings/clock/sun50i-h6-ccu.h>
+#include <dt-bindings/reset/sun50i-h6-ccu.h>
+
+#define CLK_OSC12M 0
+#define CLK_PLL_CPUX 1
+#define CLK_PLL_DDR0 2
+
+/* PLL_PERIPH0 exported for PRCM */
+
+#define CLK_PLL_PERIPH0_2X 4
+#define CLK_PLL_PERIPH0_4X 5
+#define CLK_PLL_PERIPH1 6
+#define CLK_PLL_PERIPH1_2X 7
+#define CLK_PLL_PERIPH1_4X 8
+#define CLK_PLL_GPU 9
+#define CLK_PLL_VIDEO0 10
+#define CLK_PLL_VIDEO0_4X 11
+#define CLK_PLL_VIDEO1 12
+#define CLK_PLL_VIDEO1_4X 13
+#define CLK_PLL_VE 14
+#define CLK_PLL_DE 15
+#define CLK_PLL_HSIC 16
+#define CLK_PLL_AUDIO_BASE 17
+#define CLK_PLL_AUDIO 18
+#define CLK_PLL_AUDIO_2X 19
+#define CLK_PLL_AUDIO_4X 20
+
+/* CPUX clock exported for DVFS */
+
+#define CLK_AXI 22
+#define CLK_CPUX_APB 23
+#define CLK_PSI_AHB1_AHB2 24
+#define CLK_AHB3 25
+#define CLK_APB1 26
+#define CLK_APB2 27
+#define CLK_MBUS 28
+
+/* All module clocks and bus gates are exported except DRAM */
+
+#define CLK_DRAM 52
+
+#define CLK_BUS_DRAM 60
+
+#define CLK_NUMBER 137
+
+#endif /* _CCU_SUN50I_H6_H_ */
diff --git a/include/dt-bindings/clock/sun50i-h6-ccu.h b/include/dt-bindings/clock/sun50i-h6-ccu.h
new file mode 100644
index 000000000000..a2d534d917bb
--- /dev/null
+++ b/include/dt-bindings/clock/sun50i-h6-ccu.h
@@ -0,0 +1,159 @@
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy at aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN50I_H6_H_
+#define _DT_BINDINGS_CLK_SUN50I_H6_H_
+
+#define CLK_PLL_PERIPH0 3
+
+#define CLK_CPUX 21
+
+#define CLK_DE 29
+#define CLK_BUS_DE 30
+#define CLK_DEINTERLACE 31
+#define CLK_BUS_DEINTERLACE 32
+#define CLK_GPU 33
+#define CLK_BUS_GPU 34
+#define CLK_CE 35
+#define CLK_BUS_CE 36
+#define CLK_VE 37
+#define CLK_BUS_VE 38
+#define CLK_EMCE 39
+#define CLK_BUS_EMCE 40
+#define CLK_VP9 41
+#define CLK_BUS_VP9 42
+#define CLK_BUS_DMA 43
+#define CLK_BUS_MSGBOX 44
+#define CLK_BUS_SPINLOCK 45
+#define CLK_BUS_HSTIMER 46
+#define CLK_AVS 47
+#define CLK_BUS_DBG 48
+#define CLK_BUS_PSI 49
+#define CLK_BUS_PWM 50
+#define CLK_BUS_IOMMU 51
+
+#define CLK_MBUS_DMA 53
+#define CLK_MBUS_VE 54
+#define CLK_MBUS_CE 55
+#define CLK_MBUS_TS 56
+#define CLK_MBUS_NAND 57
+#define CLK_MBUS_CSI 58
+#define CLK_MBUS_DEINTERLACE 59
+
+#define CLK_NAND0 61
+#define CLK_NAND1 62
+#define CLK_BUS_NAND 63
+#define CLK_MMC0 64
+#define CLK_MMC1 65
+#define CLK_MMC2 66
+#define CLK_BUS_MMC0 67
+#define CLK_BUS_MMC1 68
+#define CLK_BUS_MMC2 69
+#define CLK_BUS_UART0 70
+#define CLK_BUS_UART1 71
+#define CLK_BUS_UART2 72
+#define CLK_BUS_UART3 73
+#define CLK_BUS_I2C0 74
+#define CLK_BUS_I2C1 75
+#define CLK_BUS_I2C2 76
+#define CLK_BUS_I2C3 77
+#define CLK_BUS_SCR0 78
+#define CLK_BUS_SCR1 79
+#define CLK_SPI0 80
+#define CLK_SPI1 81
+#define CLK_BUS_SPI0 82
+#define CLK_BUS_SPI1 83
+#define CLK_BUS_EMAC 84
+#define CLK_TS 85
+#define CLK_BUS_TS 86
+#define CLK_IR_TX 87
+#define CLK_BUS_IR_TX 88
+#define CLK_BUS_THS 89
+#define CLK_I2S3 90
+#define CLK_I2S0 91
+#define CLK_I2S1 92
+#define CLK_I2S2 93
+#define CLK_BUS_I2S0 94
+#define CLK_BUS_I2S1 95
+#define CLK_BUS_I2S2 96
+#define CLK_BUS_I2S3 97
+#define CLK_SPDIF 98
+#define CLK_BUS_SPDIF 99
+#define CLK_DMIC 100
+#define CLK_BUS_DMIC 101
+#define CLK_AUDIO_HUB 102
+#define CLK_BUS_AUDIO_HUB 103
+#define CLK_USB_OHCI0 104
+#define CLK_USB_PHY0 105
+#define CLK_USB_PHY1 106
+#define CLK_USB_OHCI3 107
+#define CLK_USB_PHY3 108
+#define CLK_USB_HSIC_12M 109
+#define CLK_USB_HSIC 110
+#define CLK_BUS_OHCI0 111
+#define CLK_BUS_OHCI3 112
+#define CLK_BUS_EHCI0 113
+#define CLK_BUS_XHCI 114
+#define CLK_BUS_EHCI3 115
+#define CLK_BUS_OTG 116
+#define CLK_PCIE_REF_100M 117
+#define CLK_PCIE_REF 118
+#define CLK_PCIE_REF_OUT 119
+#define CLK_PCIE_MAXI 120
+#define CLK_PCIE_AUX 121
+#define CLK_BUS_PCIE 122
+#define CLK_HDMI 123
+#define CLK_HDMI_CEC 124
+#define CLK_BUS_HDMI 125
+#define CLK_BUS_TCON_TOP 126
+#define CLK_TCON_LCD0 127
+#define CLK_BUS_TCON_LCD0 128
+#define CLK_TCON_TV0 129
+#define CLK_BUS_TCON_TV0 130
+#define CLK_CSI_CCI 131
+#define CLK_CSI_TOP 132
+#define CLK_CSI_MCLK 133
+#define CLK_BUS_CSI 134
+#define CLK_HDCP 135
+#define CLK_BUS_HDCP 136
+
+#endif /* _DT_BINDINGS_CLK_SUN50I_H6_H_ */
diff --git a/include/dt-bindings/reset/sun50i-h6-ccu.h b/include/dt-bindings/reset/sun50i-h6-ccu.h
new file mode 100644
index 000000000000..d40ae3bf418f
--- /dev/null
+++ b/include/dt-bindings/reset/sun50i-h6-ccu.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy at aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RESET_SUN50I_H6_H_
+#define _DT_BINDINGS_RESET_SUN50I_H6_H_
+
+#define RST_MBUS 0
+#define RST_BUS_DE 1
+#define RST_BUS_DEINTERLACE 2
+#define RST_BUS_GPU 3
+#define RST_BUS_CE 4
+#define RST_BUS_VE 5
+#define RST_BUS_EMCE 6
+#define RST_BUS_VP9 7
+#define RST_BUS_DMA 8
+#define RST_BUS_MSGBOX 9
+#define RST_BUS_SPINLOCK 10
+#define RST_BUS_HSTIMER 11
+#define RST_BUS_DBG 12
+#define RST_BUS_PSI 13
+#define RST_BUS_PWM 14
+#define RST_BUS_IOMMU 15
+#define RST_BUS_DRAM 16
+#define RST_BUS_NAND 17
+#define RST_BUS_MMC0 18
+#define RST_BUS_MMC1 19
+#define RST_BUS_MMC2 20
+#define RST_BUS_UART0 21
+#define RST_BUS_UART1 22
+#define RST_BUS_UART2 23
+#define RST_BUS_UART3 24
+#define RST_BUS_I2C0 25
+#define RST_BUS_I2C1 26
+#define RST_BUS_I2C2 27
+#define RST_BUS_I2C3 28
+#define RST_BUS_SCR0 29
+#define RST_BUS_SCR1 30
+#define RST_BUS_SPI0 31
+#define RST_BUS_SPI1 32
+#define RST_BUS_EMAC 33
+#define RST_BUS_TS 34
+#define RST_BUS_IR_TX 35
+#define RST_BUS_THS 36
+#define RST_BUS_I2S0 37
+#define RST_BUS_I2S1 38
+#define RST_BUS_I2S2 39
+#define RST_BUS_I2S3 40
+#define RST_BUS_SPDIF 41
+#define RST_BUS_DMIC 42
+#define RST_BUS_AUDIO_HUB 43
+#define RST_USB_PHY0 44
+#define RST_USB_PHY1 45
+#define RST_USB_PHY3 46
+#define RST_USB_HSIC 47
+#define RST_BUS_OHCI0 48
+#define RST_BUS_OHCI3 49
+#define RST_BUS_EHCI0 50
+#define RST_BUS_XHCI 51
+#define RST_BUS_EHCI3 52
+#define RST_BUS_OTG 53
+#define RST_BUS_PCIE 54
+#define RST_PCIE_POWERUP 55
+#define RST_BUS_HDMI 56
+#define RST_BUS_HDMI_SUB 57
+#define RST_BUS_TCON_TOP 58
+#define RST_BUS_TCON_LCD0 59
+#define RST_BUS_TCON_TV0 60
+#define RST_BUS_CSI 61
+#define RST_BUS_HDCP 62
+
+#endif /* _DT_BINDINGS_RESET_SUN50I_H6_H_ */
--
2.14.2
More information about the linux-arm-kernel
mailing list