[PATCH V4 11/26] iommu/amd: deprecate pci_get_bus_and_slot()
Sinan Kaya
okaya at codeaurora.org
Thu Jan 4 04:25:55 PST 2018
On 12/19/2017 12:37 AM, Sinan Kaya wrote:
> pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
> where a PCI device is present. This restricts the device drivers to be
> reused for other domain numbers.
>
> Getting ready to remove pci_get_bus_and_slot() function in favor of
> pci_get_domain_bus_and_slot().
>
> Hard-code the domain number as 0 for the AMD IOMMU driver.
>
> Signed-off-by: Sinan Kaya <okaya at codeaurora.org>
> ---
> drivers/iommu/amd_iommu.c | 3 ++-
> drivers/iommu/amd_iommu_init.c | 9 +++++----
> drivers/iommu/amd_iommu_v2.c | 3 ++-
> 3 files changed, 9 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
> index 7d5eb00..821547b 100644
> --- a/drivers/iommu/amd_iommu.c
> +++ b/drivers/iommu/amd_iommu.c
> @@ -527,7 +527,8 @@ static void amd_iommu_report_page_fault(u16 devid, u16 domain_id,
> struct iommu_dev_data *dev_data = NULL;
> struct pci_dev *pdev;
>
> - pdev = pci_get_bus_and_slot(PCI_BUS_NUM(devid), devid & 0xff);
> + pdev = pci_get_domain_bus_and_slot(0, PCI_BUS_NUM(devid),
> + devid & 0xff);
> if (pdev)
> dev_data = get_dev_data(&pdev->dev);
>
> diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
> index 6fe2d03..4e4a615 100644
> --- a/drivers/iommu/amd_iommu_init.c
> +++ b/drivers/iommu/amd_iommu_init.c
> @@ -1697,8 +1697,8 @@ static int iommu_init_pci(struct amd_iommu *iommu)
> u32 range, misc, low, high;
> int ret;
>
> - iommu->dev = pci_get_bus_and_slot(PCI_BUS_NUM(iommu->devid),
> - iommu->devid & 0xff);
> + iommu->dev = pci_get_domain_bus_and_slot(0, PCI_BUS_NUM(iommu->devid),
> + iommu->devid & 0xff);
> if (!iommu->dev)
> return -ENODEV;
>
> @@ -1764,8 +1764,9 @@ static int iommu_init_pci(struct amd_iommu *iommu)
> if (is_rd890_iommu(iommu->dev)) {
> int i, j;
>
> - iommu->root_pdev = pci_get_bus_and_slot(iommu->dev->bus->number,
> - PCI_DEVFN(0, 0));
> + iommu->root_pdev =
> + pci_get_domain_bus_and_slot(0, iommu->dev->bus->number,
> + PCI_DEVFN(0, 0));
>
> /*
> * Some rd890 systems may not be fully reconfigured by the
> diff --git a/drivers/iommu/amd_iommu_v2.c b/drivers/iommu/amd_iommu_v2.c
> index 7d94e1d..8696382 100644
> --- a/drivers/iommu/amd_iommu_v2.c
> +++ b/drivers/iommu/amd_iommu_v2.c
> @@ -564,7 +564,8 @@ static int ppr_notifier(struct notifier_block *nb, unsigned long e, void *data)
> finish = (iommu_fault->tag >> 9) & 1;
>
> devid = iommu_fault->device_id;
> - pdev = pci_get_bus_and_slot(PCI_BUS_NUM(devid), devid & 0xff);
> + pdev = pci_get_domain_bus_and_slot(0, PCI_BUS_NUM(devid),
> + devid & 0xff);
> if (!pdev)
> return -ENODEV;
> dev_data = get_dev_data(&pdev->dev);
>
Any comments from the IOMMU people?
--
Sinan Kaya
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
More information about the linux-arm-kernel
mailing list