[PATCH 2/3] mfd: axp20x: Add support for backup battery charging

[Lee Jones]

On Sat, 30 Dec 2017, Paul Kocialkowski wrote:

> This adds support for backup battery charging for axp20x PMICs, that is
> configured through a dedicated device-tree property.
> 
> It supports 4 different charging voltages and as many charging currents.
> This is especially useful to allow the on-chip RTC (on the SoC side) to
> be powered when the rest of the system is off.
> 
> Signed-off-by: Paul Kocialkowski <contact at paulk.fr>
> 
> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> index 2468b431bb22..7847f5d0b979 100644
> --- a/drivers/mfd/axp20x.c
> +++ b/drivers/mfd/axp20x.c
> @@ -34,6 +34,16 @@
>  #define AXP806_REG_ADDR_EXT_ADDR_MASTER_MODE	0
>  #define AXP806_REG_ADDR_EXT_ADDR_SLAVE_MODE	BIT(4)
>  
> +#define AXP20X_CHRG_BAK_CTRL_ENABLE		BIT(7)
> +#define AXP20X_CHRG_BAK_VOLTAGE_3100_MV		(0 << 5)
> +#define AXP20X_CHRG_BAK_VOLTAGE_3000_MV		(1 << 5)
> +#define AXP20X_CHRG_BAK_VOLTAGE_3600_MV		(2 << 5)
> +#define AXP20X_CHRG_BAK_VOLTAGE_2500_MV		(3 << 5)
> +#define AXP20X_CHRG_BAK_CURRENT_50_UA		(0 << 0)
> +#define AXP20X_CHRG_BAK_CURRENT_100_UA		(1 << 0)
> +#define AXP20X_CHRG_BAK_CURRENT_200_UA		(2 << 0)
> +#define AXP20X_CHRG_BAK_CURRENT_400_UA		(3 << 0)
> +
>  static const char * const axp20x_model_names[] = {
>  	"AXP152",
>  	"AXP202",
> @@ -894,6 +904,63 @@ static void axp20x_power_off(void)
>  	msleep(500);
>  }
>  
> +static void axp20x_backup_setup(struct axp20x_dev *axp20x)
> +{
> +	u32 backup[2];
> +	int reg;
> +	int ret;
> +
> +	ret = of_property_read_u32_array(axp20x->dev->of_node, "backup", backup,
> +					 2);
> +	if (ret != 0)

Nit:
        if (ret)

> +		return;
> +
> +	switch (axp20x->variant) {
> +	case AXP202_ID:
> +	case AXP209_ID:

Nested switch statements, hmm ...

Instead, what if you either only invoked this function for supported
devices, or at least returned early for non-supported ones?

if (axp20x->variant != AXP202_ID && axp20x->variant != AXP209_ID)
        return;

> +		reg = AXP20X_CHRG_BAK_CTRL_ENABLE;
> +
> +		/* Charging voltage. */
> +		switch (backup[0]) {
> +		case 2500:
> +			reg |= AXP20X_CHRG_BAK_VOLTAGE_2500_MV;
> +			break;
> +		case 3000:
> +			reg |= AXP20X_CHRG_BAK_VOLTAGE_3000_MV;
> +			break;
> +		case 3100:
> +			reg |= AXP20X_CHRG_BAK_VOLTAGE_3100_MV;
> +			break;
> +		case 3600:
> +			reg |= AXP20X_CHRG_BAK_VOLTAGE_3600_MV;
> +			break;
> +		default:
> +			return;
> +		}
> +
> +		/* Charging current. */
> +		switch (backup[1]) {
> +		case 50:
> +			reg |= AXP20X_CHRG_BAK_CURRENT_50_UA;
> +			break;
> +		case 100:
> +			reg |= AXP20X_CHRG_BAK_CURRENT_100_UA;
> +			break;
> +		case 200:
> +			reg |= AXP20X_CHRG_BAK_CURRENT_200_UA;
> +			break;
> +		case 400:
> +			reg |= AXP20X_CHRG_BAK_CURRENT_400_UA;
> +			break;
> +		default:
> +			return;
> +		}
> +
> +		regmap_write(axp20x->regmap, AXP20X_CHRG_BAK_CTRL, reg);
> +		break;
> +	}
> +}
> +
>  int axp20x_match_device(struct axp20x_dev *axp20x)
>  {
>  	struct device *dev = axp20x->dev;
> @@ -1023,6 +1090,9 @@ int axp20x_device_probe(struct axp20x_dev *axp20x)
>  				     AXP806_REG_ADDR_EXT_ADDR_SLAVE_MODE);
>  	}
>  
> +	/* Backup RTC battery. */
> +	axp20x_backup_setup(axp20x);
> +
>  	ret = regmap_add_irq_chip(axp20x->regmap, axp20x->irq,
>  			  IRQF_ONESHOT | IRQF_SHARED | axp20x->irq_flags,
>  			   -1, axp20x->regmap_irq_chip, &axp20x->regmap_irqc);

-- 
Lee Jones
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog