[PATCH 5/5] ARM: dts: imx6q-icore-ofcap12: Switch LVDS timings from panel-simple
Jagan Teki
jagan at amarulasolutions.com
Tue Jan 2 01:02:18 PST 2018
Switch to use koe_tx31d200vm0baa LVDS timings from
panel-simple instead hard coding the same in dts.
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
arch/arm/boot/dts/imx6q-icore-ofcap12.dts | 31 +++++++++++++++++--------------
1 file changed, 17 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
index 9e230f5..6e27c81 100644
--- a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
+++ b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
@@ -48,28 +48,31 @@
/ {
model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 12 Kit";
compatible = "engicam,imx6-icore", "fsl,imx6q";
+
+ panel {
+ compatible = "koe,tx31d200vm0baa";
+ backlight = <&backlight_lvds>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
};
&ldb {
status = "okay";
lvds-channel at 0 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
+ reg = <0>;
status = "okay";
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <46800000>;
- hactive = <1280>;
- vactive = <480>;
- hback-porch = <353>;
- hfront-porch = <47>;
- vback-porch = <39>;
- vfront-porch = <4>;
- hsync-len = <8>;
- vsync-len = <2>;
+ port at 4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
};
};
};
--
2.7.4
More information about the linux-arm-kernel
mailing list