[PATCH v3 05/10] pwm: add PWM mode to pwm_config()

[Thierry Reding]

On Thu, Feb 22, 2018 at 02:01:16PM +0200, Claudiu Beznea wrote:
> Add PWM mode to pwm_config() function. The drivers which uses pwm_config()
> were adapted to this change.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
> ---
>  arch/arm/mach-s3c24xx/mach-rx1950.c  | 11 +++++++++--
>  drivers/bus/ts-nbus.c                |  2 +-
>  drivers/clk/clk-pwm.c                |  3 ++-
>  drivers/gpu/drm/i915/intel_panel.c   | 17 ++++++++++++++---
>  drivers/hwmon/pwm-fan.c              |  2 +-
>  drivers/input/misc/max77693-haptic.c |  2 +-
>  drivers/input/misc/max8997_haptic.c  |  6 +++++-
>  drivers/leds/leds-pwm.c              |  5 ++++-
>  drivers/media/rc/ir-rx51.c           |  5 ++++-
>  drivers/media/rc/pwm-ir-tx.c         |  5 ++++-
>  drivers/video/backlight/lm3630a_bl.c |  4 +++-
>  drivers/video/backlight/lp855x_bl.c  |  4 +++-
>  drivers/video/backlight/lp8788_bl.c  |  5 ++++-
>  drivers/video/backlight/pwm_bl.c     | 11 +++++++++--
>  drivers/video/fbdev/ssd1307fb.c      |  3 ++-
>  include/linux/pwm.h                  |  6 ++++--
>  16 files changed, 70 insertions(+), 21 deletions(-)

I don't think it makes sense to leak mode support into the legacy API.
The pwm_config() function is considered legacy and should eventually go
away. As such it doesn't make sense to integrate a new feature such as
PWM modes into it. All users of pwm_config() assume normal mode, and
that's what pwm_config() should provide.

Anyone that needs something other than normal mode should use the new
atomic PWM API.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180228/ee4ccbc7/attachment.sig>