[PATCH 1/3] ARM: dts: sun8i: a83t: add cpu0 and cpu100 labels

[Quentin Schulz]

The Allwinner A83T is a SoC with two clusters of 4 A7, each cluster
having its own regulator and clock.

The regulators are board-specific, thus we need labels for cpu0 and
cpu100 so that we can use references to these nodes from the board
header file.

Signed-off-by: Quentin Schulz <quentin.schulz at bootlin.com>
---
 arch/arm/boot/dts/sun8i-a83t.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 46ae4fa..016d22f 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -60,7 +60,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu at 0 {
+		cpu0: cpu at 0 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <0>;
@@ -84,7 +84,7 @@
 			reg = <3>;
 		};
 
-		cpu at 100 {
+		cpu100: cpu at 100 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <0x100>;
-- 
git-series 0.9.1