[PATCH] arm64: dts: Hi3660: Remove 'CPU_NAP' idle state

Leo Yan leo.yan at linaro.org
Tue Feb 27 21:08:04 PST 2018


Hi Wei,

On Tue, Jan 09, 2018 at 12:32:42PM +0800, Leo Yan wrote:
> Thanks a lot for Vincent Guittot careful work to find bug for 'CPU_NAP'
> idle state.  At early time, the CPU CA73 CPU_NAP idle state has been
> supported on Hikey960.  Later we found the system has the hang issue
> and for resolving this issue Hisilicon released new MCU firmware, but
> unfortunately the new MCU firmware has side effect and results in the
> CA73 CPU cannot really enter CPU_NAP state and roll back to WFI state.
> 
> After discussion we cannot see the possibility to enable CA73 CPU_NAP
> state anymore on Hikey960, based on this conclusion we should remove
> this state from DT binding.
> 
> Cc: Daniel Lezcano <daniel.lezcano at linaro.org>
> Cc: Kevin Wang <jean.wangtao at linaro.org>
> Cc: Vincent Guittot <vincent.guittot at linaro.org>
> Signed-off-by: Leo Yan <leo.yan at linaro.org>

Could you help to pick up this patch? Thanks!

> ---
>  arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 32 ++++---------------------------
>  1 file changed, 4 insertions(+), 28 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
> index ab0b95b..8fddf0d 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
> @@ -96,11 +96,7 @@
>  			reg = <0x0 0x100>;
>  			enable-method = "psci";
>  			next-level-cache = <&A73_L2>;
> -			cpu-idle-states = <
> -					&CPU_NAP
> -					&CPU_SLEEP
> -					&CLUSTER_SLEEP_1
> -			>;
> +			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
>  		};
>  
>  		cpu5: cpu at 101 {
> @@ -109,11 +105,7 @@
>  			reg = <0x0 0x101>;
>  			enable-method = "psci";
>  			next-level-cache = <&A73_L2>;
> -			cpu-idle-states = <
> -					&CPU_NAP
> -					&CPU_SLEEP
> -					&CLUSTER_SLEEP_1
> -			>;
> +			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
>  		};
>  
>  		cpu6: cpu at 102 {
> @@ -122,11 +114,7 @@
>  			reg = <0x0 0x102>;
>  			enable-method = "psci";
>  			next-level-cache = <&A73_L2>;
> -			cpu-idle-states = <
> -					&CPU_NAP
> -					&CPU_SLEEP
> -					&CLUSTER_SLEEP_1
> -			>;
> +			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
>  		};
>  
>  		cpu7: cpu at 103 {
> @@ -135,24 +123,12 @@
>  			reg = <0x0 0x103>;
>  			enable-method = "psci";
>  			next-level-cache = <&A73_L2>;
> -			cpu-idle-states = <
> -					&CPU_NAP
> -					&CPU_SLEEP
> -					&CLUSTER_SLEEP_1
> -			>;
> +			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
>  		};
>  
>  		idle-states {
>  			entry-method = "psci";
>  
> -			CPU_NAP: cpu-nap {
> -				compatible = "arm,idle-state";
> -				arm,psci-suspend-param = <0x0000001>;
> -				entry-latency-us = <7>;
> -				exit-latency-us = <2>;
> -				min-residency-us = <15>;
> -			};
> -
>  			CPU_SLEEP: cpu-sleep {
>  				compatible = "arm,idle-state";
>  				local-timer-stop;
> -- 
> 2.7.4
> 



More information about the linux-arm-kernel mailing list