[PATCH] ARM: dts: imx6dl-icore-rqs: Fix invalid PHY address assignment for ethernet
shyam saini
mayhs11saini at gmail.com
Tue Feb 27 07:59:03 PST 2018
From: Shyam Saini <shyam at amarulasolutions.com>
Add "reg" property for ethernet to fix this issue.
Errors in boot logs:
mdio_bus 2188000.ethernet-1:
/soc/aips-bus at 02100000/ethernet at 02188000/mdio/ethernet-phy
has invalid PHY address
mdio_bus 2188000.ethernet-1: scan phy ethernet-phy at address 0
mdio_bus 2188000.ethernet-1: scan phy ethernet-phy at address 1
mdio_bus 2188000.ethernet-1: scan phy ethernet-phy at address 2
mdio_bus 2188000.ethernet-1: scan phy ethernet-phy at address 3
Reported-by: Shyam Saini <shyam at amarulasolutions.com>
Suggested-by: Michael Trimarchi <michael at amarulasolutions.com>
Signed-off-by: Shyam Saini <shyam at amarulasolutions.com>
---
arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
index 49daa2b7892d..acc3b11fba2a 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
@@ -200,7 +200,11 @@
status = "okay";
mdio {
- eth_phy: ethernet-phy {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy: ethernet-phy at 0 {
+ reg = <0x0>;
rxc-skew-ps = <1140>;
txc-skew-ps = <1140>;
txen-skew-ps = <600>;
--
2.7.4
More information about the linux-arm-kernel
mailing list