[PATCH v3 0/2] add support for Socionext SynQuacer I2C controller

Ard Biesheuvel ard.biesheuvel at linaro.org
Tue Feb 27 03:01:05 PST 2018


Add a binding and a driver for the I2C IP found in the Socionext SynQuacer
SoC, which is essentially a rebranded version of the Fujitsu F_I2C controller.

v3:
- incorporate more of Andy's review comments (#2), especially regarding the
  bus speed and clock source handling for ACPI
- patch #1 unchanged.

v2:
- incorporate Andy's review comments (#2)
- patch #1 unchanged.

Ard Biesheuvel (2):
  dt-bindings: i2c: add binding for Socionext SynQuacer I2C
  i2c: add support for Socionext SynQuacer I2C controller

 Documentation/devicetree/bindings/i2c/i2c-synquacer.txt |  29 +
 drivers/i2c/busses/Kconfig                              |  10 +
 drivers/i2c/busses/Makefile                             |   1 +
 drivers/i2c/busses/i2c-synquacer.c                      | 787 ++++++++++++++++++++
 4 files changed, 827 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-synquacer.txt
 create mode 100644 drivers/i2c/busses/i2c-synquacer.c

-- 
2.11.0




More information about the linux-arm-kernel mailing list