[linux-sunxi] [PATCH 14/15] ARM: dts: sun8i: h3: Enable HDMI output on H3 boards

[Icenowy Zheng]

于 2018年2月27日 GMT+08:00 上午12:16:44, "Jernej Škrabec" <jernej.skrabec at siol.net> 写到:
>Hi Julian,
>
>Dne nedelja, 25. februar 2018 ob 09:11:34 CET je Julian Calaby
>napisal(a):
>> Hi Jernej,
>> 
>> On Sun, Feb 25, 2018 at 8:45 AM, Jernej Skrabec
><jernej.skrabec at siol.net> 
>wrote:
>> > Enable HDMI output on all boards which have HDMI connector.
>> > 
>> > Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
>> > ---
>> > 
>> >  arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts    | 25
>> >  ++++++++++++++++++++++ arch/arm/boot/dts/sun8i-h3-beelink-x2.dts  
>     
>> >   | 25 ++++++++++++++++++++++
>> >  arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts | 25
>> >  ++++++++++++++++++++++ arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts   
>     
>> >   | 25 ++++++++++++++++++++++
>arch/arm/boot/dts/sun8i-h3-orangepi-2.dts  
>> >         | 25 ++++++++++++++++++++++
>> >  arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts       | 25
>> >  ++++++++++++++++++++++ arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
>     
>> >   | 24 +++++++++++++++++++++
>arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts  
>> >        | 25 ++++++++++++++++++++++ 8 files changed, 199
>insertions(+)
>> 
>> As I understand it, the H2+ is just a slightly trimmed down H3. In
>> terms of HDMI support, the difference is that the H2+ can't output
>4k.
>> If this code is compatible with the H2+, could you please add the
>> necessary bits and pieces to the h2-plus DTSs too?
>
>There are only 3 H2+ boards in kernel and none of them has HDMI
>connector, so 

BPi M2 Zero has miniHDMI connector.

>there's nothing to do actually. But if such board is added to kernel,
>it would 
>be trivially add proper nodes, since all H2+ boards include H3 DTSI.
>
>Best regards,
>Jernej