[PATCH v7 14/15] cpufreq: Add module to register cpufreq on Krait CPUs

[Sricharan R]

Hi Viresh,

On 2/26/2018 3:34 PM, Viresh Kumar wrote:
> On 26-02-18, 15:23, Sricharan R wrote:
>> From: Stephen Boyd <sboyd at codeaurora.org>
> 
> Is this email id still valid ?
> 

 Yes. codeaurora id should exist.

>> +static int __init qcom_cpufreq_populate_opps(struct nvmem_cell *pvs_nvmem,
>> +					     struct opp_table **tbl)
>> +{
>> +	int speed = 0, pvs = 0, pvs_ver = 0, cpu;
>> +	struct device *cpu_dev;
>> +	u8 *buf;
>> +	size_t len;
>> +	char pvs_name[] = "speedXX-pvsXX-vXX";
>> +
>> +	buf = nvmem_cell_read(pvs_nvmem, &len);
>> +	if (len == 4)
>> +		get_krait_bin_format_a(&speed, &pvs, &pvs_ver, pvs_nvmem, buf);
>> +	else if (len == 8)
>> +		get_krait_bin_format_b(&speed, &pvs, &pvs_ver, pvs_nvmem, buf);
>> +	else
>> +		pr_warn("Unable to read nvmem data. Defaulting to 0!\n");
>> +
>> +	snprintf(pvs_name, sizeof(pvs_name), "speed%d-pvs%d-v%d",
>> +		 speed, pvs, pvs_ver);
>> +
>> +	for (cpu = 0; cpu < num_possible_cpus(); cpu++) {
>> +		cpu_dev = get_cpu_device(cpu);
>> +		if (!cpu_dev)
>> +			return -ENODEV;
>> +
>> +		tbl[cpu] = dev_pm_opp_set_prop_name(cpu_dev, pvs_name);
>> +
>> +		if (IS_ERR(tbl[cpu])) {
>> +			tbl[cpu] = 0;
>> +			pr_warn("failed to add OPP name %s\n", pvs_name);
>> +			return PTR_ERR(tbl[cpu]);
> 
> You just set tbl[cpu] to 0 :)
> 

 my bad. will fix it.

>> +		}
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static int __init qcom_cpufreq_driver_init(void)
>> +{
>> +	struct platform_device *pdev;
>> +	struct device *cpu_dev;
>> +	struct device_node *np;
>> +	struct nvmem_cell *pvs_nvmem;
>> +	struct opp_table *tbl[NR_CPUS] = { NULL };
>> +	int ret, cpu = 0;
>> +
>> +	cpu_dev = get_cpu_device(0);
>> +	if (!cpu_dev)
>> +		return -ENODEV;
>> +
>> +	np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
>> +	if (!np)
>> +		return -ENOENT;
>> +
>> +	if (!of_device_is_compatible(np, "operating-points-v2-krait-cpu")) {
>> +		ret = -ENOENT;
>> +		goto free_np;
>> +	}
>> +
>> +	pvs_nvmem = of_nvmem_cell_get(np, NULL);
>> +	if (IS_ERR(pvs_nvmem)) {
>> +		dev_err(cpu_dev, "Could not get nvmem cell\n");
>> +		ret = PTR_ERR(pvs_nvmem);
>> +		goto free_np;
>> +	}
>> +
>> +	ret = qcom_cpufreq_populate_opps(pvs_nvmem, tbl);
>> +	if (ret)
>> +		goto free_opp_name;
>> +
>> +	pdev = platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
>> +	if (IS_ERR(pdev)) {
>> +		ret = PTR_ERR(pdev);
>> +		goto free_opp_name;
>> +	}
>> +
>> +	of_node_put(np);
>> +
>> +	return 0;
>> +
>> +free_opp_name:
>> +	while (tbl[cpu]) {
>> +		dev_pm_opp_put_prop_name(tbl[cpu]);
>> +		cpu++;
>> +	}
>> +
>> +free_np:
>> +	of_node_put(np);
>> +
>> +	return ret;
>> +}
>> +late_initcall(qcom_cpufreq_driver_init);
>> +
>> +MODULE_DESCRIPTION("Qualcomm CPUfreq driver");
>> +MODULE_AUTHOR("Stephen Boyd <sboyd at codeaurora.org>");
>> +MODULE_LICENSE("GPL v2");
> 
> Everything else is fine. Fix above issue and you can add
> 
> Acked-by: Viresh Kumar <viresh.kumar at linaro.org>
> 

 Thanks. Will fix and repost.

Regards,
 Sricharan

-- 
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation