[PATCH usb-next v10 2/8] usb: add a flag to skip PHY initialization to struct usb_hcd
Peter Chen
hzpeterchen at gmail.com
Sun Feb 25 19:26:59 PST 2018
On Sun, Feb 18, 2018 at 07:44:58PM +0100, Martin Blumenstingl wrote:
> The USB HCD core driver parses the device-tree node for "phys" and
> "usb-phys" properties. It also manages the power state of these PHYs
> automatically.
> However, drivers may opt-out of this behavior by setting "phy" or
> "usb_phy" in struct usb_hcd to a non-null value. An example where this
> is required is the "Qualcomm USB2 controller", implemented by the
> chipidea driver. The hardware requires that the PHY is only powered on
> after the "reset completed" event from the controller is received.
>
> A follow-up patch will allow the USB HCD core driver to manage more than
> one PHY. Add a new "skip_phy_initialization" bitflag to struct usb_hcd
> so drivers can opt-out of any PHY management provided by the USB HCD
> core driver.
>
> This also updates the existing drivers so they use the new flag if they
> want to opt out of the PHY management provided by the USB HCD core
> driver. This means that for these drivers the new "multiple PHY"
> handling (which will be added in a follow-up patch) will be disabled as
> well.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
> ---
> drivers/usb/chipidea/host.c | 6 ++----
> drivers/usb/core/hcd.c | 4 ++--
> drivers/usb/host/ehci-fsl.c | 2 ++
> drivers/usb/host/ehci-platform.c | 4 ++--
> drivers/usb/host/ehci-tegra.c | 1 +
> drivers/usb/host/ohci-omap.c | 1 +
> drivers/usb/host/ohci-platform.c | 4 ++--
> drivers/usb/host/xhci-plat.c | 1 +
> include/linux/usb/hcd.h | 6 ++++++
> 9 files changed, 19 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
> index 19d60ed7e41f..af45aa3222b5 100644
> --- a/drivers/usb/chipidea/host.c
> +++ b/drivers/usb/chipidea/host.c
> @@ -124,10 +124,8 @@ static int host_start(struct ci_hdrc *ci)
>
> hcd->power_budget = ci->platdata->power_budget;
> hcd->tpl_support = ci->platdata->tpl_support;
> - if (ci->phy)
> - hcd->phy = ci->phy;
> - else
> - hcd->usb_phy = ci->usb_phy;
> + if (ci->phy || ci->usb_phy)
> + hcd->skip_phy_initialization = 1;
>
> ehci = hcd_to_ehci(hcd);
> ehci->caps = ci->hw_bank.cap;
> diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
> index fc32391a34d5..f2307470a31e 100644
> --- a/drivers/usb/core/hcd.c
> +++ b/drivers/usb/core/hcd.c
> @@ -2727,7 +2727,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
> int retval;
> struct usb_device *rhdev;
>
> - if (IS_ENABLED(CONFIG_USB_PHY) && !hcd->usb_phy) {
> + if (IS_ENABLED(CONFIG_USB_PHY) && !hcd->skip_phy_initialization) {
> struct usb_phy *phy = usb_get_phy_dev(hcd->self.sysdev, 0);
>
> if (IS_ERR(phy)) {
> @@ -2745,7 +2745,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
> }
> }
>
> - if (IS_ENABLED(CONFIG_GENERIC_PHY) && !hcd->phy) {
> + if (IS_ENABLED(CONFIG_GENERIC_PHY) && !hcd->skip_phy_initialization) {
> struct phy *phy = phy_get(hcd->self.sysdev, "usb");
>
> if (IS_ERR(phy)) {
> diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
> index c5094cb88cd5..0a9fd2022acf 100644
> --- a/drivers/usb/host/ehci-fsl.c
> +++ b/drivers/usb/host/ehci-fsl.c
> @@ -155,6 +155,8 @@ static int fsl_ehci_drv_probe(struct platform_device *pdev)
> retval = -ENODEV;
> goto err2;
> }
> +
> + hcd->skip_phy_initialization = 1;
> }
> #endif
> return retval;
> diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
> index b065a960adc2..b91eea8c73ae 100644
> --- a/drivers/usb/host/ehci-platform.c
> +++ b/drivers/usb/host/ehci-platform.c
> @@ -219,9 +219,9 @@ static int ehci_platform_probe(struct platform_device *dev)
> if (IS_ERR(priv->phys[phy_num])) {
> err = PTR_ERR(priv->phys[phy_num]);
> goto err_put_hcd;
> - } else if (!hcd->phy) {
> + } else {
> /* Avoiding phy_get() in usb_add_hcd() */
> - hcd->phy = priv->phys[phy_num];
> + hcd->skip_phy_initialization = 1;
> }
> }
>
> diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
> index c809f7d2f08f..a6f4389f7e88 100644
> --- a/drivers/usb/host/ehci-tegra.c
> +++ b/drivers/usb/host/ehci-tegra.c
> @@ -461,6 +461,7 @@ static int tegra_ehci_probe(struct platform_device *pdev)
> goto cleanup_clk_en;
> }
> hcd->usb_phy = u_phy;
> + hcd->skip_phy_initialization = 1;
>
> tegra->needs_double_reset = of_property_read_bool(pdev->dev.of_node,
> "nvidia,needs-double-reset");
> diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
> index 0201c49bc4fc..d8d35d456456 100644
> --- a/drivers/usb/host/ohci-omap.c
> +++ b/drivers/usb/host/ohci-omap.c
> @@ -230,6 +230,7 @@ static int ohci_omap_reset(struct usb_hcd *hcd)
> } else {
> return -EPROBE_DEFER;
> }
> + hcd->skip_phy_initialization = 1;
> ohci->start_hnp = start_hnp;
> }
> #endif
> diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
> index 1e6c954f4b3f..62ef36a9333f 100644
> --- a/drivers/usb/host/ohci-platform.c
> +++ b/drivers/usb/host/ohci-platform.c
> @@ -186,9 +186,9 @@ static int ohci_platform_probe(struct platform_device *dev)
> if (IS_ERR(priv->phys[phy_num])) {
> err = PTR_ERR(priv->phys[phy_num]);
> goto err_put_hcd;
> - } else if (!hcd->phy) {
> + } else {
> /* Avoiding phy_get() in usb_add_hcd() */
> - hcd->phy = priv->phys[phy_num];
> + hcd->skip_phy_initialization = 1;
> }
> }
>
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index 6f038306c14d..6700e5ee82ad 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -284,6 +284,7 @@ static int xhci_plat_probe(struct platform_device *pdev)
> ret = usb_phy_init(hcd->usb_phy);
> if (ret)
> goto put_usb3_hcd;
> + hcd->skip_phy_initialization = 1;
> }
>
> ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
> diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
> index 176900528822..693502c84c04 100644
> --- a/include/linux/usb/hcd.h
> +++ b/include/linux/usb/hcd.h
> @@ -151,6 +151,12 @@ struct usb_hcd {
> unsigned msix_enabled:1; /* driver has MSI-X enabled? */
> unsigned msi_enabled:1; /* driver has MSI enabled? */
> unsigned remove_phy:1; /* auto-remove USB phy */
> + /*
> + * do not manage the PHY state in the HCD core, instead let the driver
> + * handle this (for example if the PHY can only be turned on after a
> + * specific event)
> + */
> + unsigned skip_phy_initialization:1;
>
> /* The next flag is a stopgap, to be removed when all the HCDs
> * support the new root-hub polling mechanism. */
> --
For chipidea part:
Acked-by: Peter Chen <peter.chen at nxp.com>
--
Best Regards,
Peter Chen
More information about the linux-arm-kernel
mailing list