[linux-sunxi] [PATCH 14/15] ARM: dts: sun8i: h3: Enable HDMI output on H3 boards

[Icenowy Zheng]

于 2018年2月25日 GMT+08:00 下午4:11:34, Julian Calaby <julian.calaby at gmail.com> 写到:
>Hi Jernej,
>
>On Sun, Feb 25, 2018 at 8:45 AM, Jernej Skrabec
><jernej.skrabec at siol.net> wrote:
>> Enable HDMI output on all boards which have HDMI connector.
>>
>> Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
>> ---
>>  arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts    | 25
>++++++++++++++++++++++
>>  arch/arm/boot/dts/sun8i-h3-beelink-x2.dts          | 25
>++++++++++++++++++++++
>>  arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts | 25
>++++++++++++++++++++++
>>  arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts           | 25
>++++++++++++++++++++++
>>  arch/arm/boot/dts/sun8i-h3-orangepi-2.dts          | 25
>++++++++++++++++++++++
>>  arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts       | 25
>++++++++++++++++++++++
>>  arch/arm/boot/dts/sun8i-h3-orangepi-one.dts        | 24
>+++++++++++++++++++++
>>  arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts         | 25
>++++++++++++++++++++++
>>  8 files changed, 199 insertions(+)
>
>As I understand it, the H2+ is just a slightly trimmed down H3. In
>terms of HDMI support, the difference is that the H2+ can't output 4k.

H2+ can OUTPUT 4K. The BSP restricts it to DECODE 4K. (And mainline won't have such restriction)

>If this code is compatible with the H2+, could you please add the
>necessary bits and pieces to the h2-plus DTSs too?
>
>Thanks,