[PATCH 13/15] ARM: dts: sunxi: h3/h5: Add HDMI pipeline

[Jernej Skrabec]

This commit adds all entries needed for HDMI to function properly.

Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
---
 arch/arm/boot/dts/sunxi-h3-h5.dtsi | 108 +++++++++++++++++++++++++++++++++++++
 1 file changed, 108 insertions(+)

diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 7a83b15225c7..e70348ed9bc0 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -105,6 +105,12 @@
 		};
 	};
 
+	de: display-engine {
+		compatible = "allwinner,sun8i-h3-display-engine";
+		allwinner,pipelines = <&mixer0>;
+		status = "disabled";
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -123,6 +129,29 @@
 			#reset-cells = <1>;
 		};
 
+		mixer0: mixer at 1100000 {
+			compatible = "allwinner,sun8i-h3-de2-mixer-0";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER0>,
+				 <&display_clocks CLK_MIXER0>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_MIXER0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port at 1 {
+					reg = <1>;
+
+					mixer0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_mixer0>;
+					};
+				};
+			};
+		};
+
 		syscon: syscon at 1c00000 {
 			compatible = "allwinner,sun8i-h3-system-controller",
 				"syscon";
@@ -138,6 +167,41 @@
 			#dma-cells = <1>;
 		};
 
+		tcon0: lcd-controller at 1c0c000 {
+			compatible = "allwinner,sun8i-h3-tcon-tv",
+				     "allwinner,sun8i-a83t-tcon-tv";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON0>;
+			reset-names = "lcd";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port at 0 {
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint {
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port at 1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_hdmi: endpoint at 1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon0>;
+					};
+				};
+			};
+		};
+
 		mmc0: mmc at 1c0f000 {
 			/* compatible and clocks are in per SoC .dtsi file */
 			reg = <0x01c0f000 0x1000>;
@@ -684,6 +748,50 @@
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
+		hdmi: hdmi at 1ee0000 {
+			compatible = "allwinner,sun8i-h3-dw-hdmi",
+				     "allwinner,sun8i-a83t-dw-hdmi";
+			reg = <0x01ee0000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+				 <&ccu CLK_HDMI>;
+			clock-names = "iahb", "isfr", "tmds";
+			resets = <&ccu RST_BUS_HDMI1>;
+			reset-names = "ctrl";
+			phys = <&hdmi_phy>;
+			phy-names = "hdmi-phy";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port at 0 {
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint {
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port at 1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy at 1ef0000 {
+			compatible = "allwinner,sun8i-h3-hdmi-phy";
+			reg = <0x01ef0000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+				 <&ccu 6>;
+			clock-names = "bus", "mod", "pll-0";
+			resets = <&ccu RST_BUS_HDMI0>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+
 		rtc: rtc at 1f00000 {
 			compatible = "allwinner,sun6i-a31-rtc";
 			reg = <0x01f00000 0x54>;
-- 
2.16.2