[PATCH v2 1/7] arm64: dts: renesas: r8a77965: Add "reg" properties
Jacopo Mondi
jacopo+renesas at jmondi.org
Fri Feb 23 05:40:53 PST 2018
Add "reg" properties to place-holder nodes with unit address defined for
R-Car M3-N SoC.
This silences the following DTC compiler warning:
Warning (unit_address_vs_reg): Node /soc/... has a unit name,
but no reg property
Signed-off-by: Jacopo Mondi <jacopo+renesas at jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
v1 -> v2:
- Extend "du" address length to include third channel
---
arch/arm64/boot/dts/renesas/r8a77965.dtsi | 51 +++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 55f05f7..4286453 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -317,6 +317,7 @@
};
intc_ex: interrupt-controller at e61c0000 {
+ reg = <0 0xe61c0000 0 0x200>;
/* placeholder */
};
@@ -520,130 +521,163 @@
};
avb: ethernet at e6800000 {
+ reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
/* placeholder */
};
csi20: csi2 at fea80000 {
+ reg = <0 0xfea80000 0 0x10000>;
/* placeholder */
};
csi40: csi2 at feaa0000 {
+ reg = <0 0xfeaa0000 0 0x10000>;
/* placeholder */
};
vin0: video at e6ef0000 {
+ reg = <0 0xe6ef0000 0 0x1000>;
/* placeholder */
};
vin1: video at e6ef1000 {
+ reg = <0 0xe6ef1000 0 0x1000>;
/* placeholder */
};
vin2: video at e6ef2000 {
+ reg = <0 0xe6ef2000 0 0x1000>;
/* placeholder */
};
vin3: video at e6ef3000 {
+ reg = <0 0xe6ef3000 0 0x1000>;
/* placeholder */
};
vin4: video at e6ef4000 {
+ reg = <0 0xe6ef4000 0 0x1000>;
/* placeholder */
};
vin5: video at e6ef5000 {
+ reg = <0 0xe6ef5000 0 0x1000>;
/* placeholder */
};
vin6: video at e6ef6000 {
+ reg = <0 0xe6ef6000 0 0x1000>;
/* placeholder */
};
vin7: video at e6ef7000 {
+ reg = <0 0xe6ef7000 0 0x1000>;
/* placeholder */
};
ohci0: usb at ee080000 {
+ reg = <0 0xee080000 0 0x100>;
/* placeholder */
};
ehci0: usb at ee080100 {
+ reg = <0 0xee080100 0 0x100>;
/* placeholder */
};
usb2_phy0: usb-phy at ee080200 {
+ reg = <0 0xee080200 0 0x700>;
/* placeholder */
};
ohci1: usb at ee0a0000 {
+ reg = <0 0xee0a0000 0 0x100>;
/* placeholder */
};
ehci1: usb at ee0a0100 {
+ reg = <0 0xee0a0100 0 0x100>;
/* placeholder */
};
i2c0: i2c at e6500000 {
+ reg = <0 0xe6500000 0 0x40>;
/* placeholder */
};
i2c1: i2c at e6508000 {
+ reg = <0 0xe6508000 0 0x40>;
/* placeholder */
};
i2c2: i2c at e6510000 {
+ reg = <0 0xe6510000 0 0x40>;
/* placeholder */
};
i2c3: i2c at e66d0000 {
+ reg = <0 0xe66d0000 0 0x40>;
/* placeholder */
};
i2c4: i2c at e66d8000 {
+ reg = <0 0xe66d8000 0 0x40>;
/* placeholder */
};
i2c5: i2c at e66e0000 {
+ reg = <0 0xe66e0000 0 0x40>;
/* placeholder */
};
i2c6: i2c at e66e8000 {
+ reg = <0 0xe66e8000 0 0x40>;
/* placeholder */
};
i2c_dvfs: i2c at e60b0000 {
+ reg = <0 0xe60b0000 0 0x425>;
/* placeholder */
};
pwm0: pwm at e6e30000 {
+ reg = <0 0xe6e30000 0 8>;
/* placeholder */
};
pwm1: pwm at e6e31000 {
+ reg = <0 0xe6e31000 0 8>;
/* placeholder */
};
pwm2: pwm at e6e32000 {
+ reg = <0 0xe6e32000 0 8>;
/* placeholder */
};
pwm3: pwm at e6e33000 {
+ reg = <0 0xe6e33000 0 8>;
/* placeholder */
};
pwm4: pwm at e6e34000 {
+ reg = <0 0xe6e34000 0 8>;
/* placeholder */
};
pwm5: pwm at e6e35000 {
+ reg = <0 0xe6e35000 0 8>;
/* placeholder */
};
pwm6: pwm at e6e36000 {
+ reg = <0 0xe6e36000 0 8>;
/* placeholder */
};
du: display at feb00000 {
+ reg = <0 0xfeb00000 0 0x80000>,
+ <0 0xfeb90000 0 0x14>;
/* placeholder */
ports {
@@ -666,18 +700,26 @@
};
hsusb: usb at e6590000 {
+ reg = <0 0xe6590000 0 0x100>;
/* placeholder */
};
pciec0: pcie at fe000000 {
+ reg = <0 0xfe000000 0 0x80000>;
/* placeholder */
};
pciec1: pcie at ee800000 {
+ reg = <0 0xee800000 0 0x80000>;
/* placeholder */
};
rcar_sound: sound at ec500000 {
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x280>, /* SSI */
+ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
/* placeholder */
rcar_sound,dvc {
@@ -703,38 +745,47 @@
};
usb2_phy1: usb-phy at ee0a0200 {
+ reg = <0 0xee0a0200 0 0x700>;
/* placeholder */
};
sdhi0: sd at ee100000 {
+ reg = <0 0xee100000 0 0x2000>;
/* placeholder */
};
sdhi1: sd at ee120000 {
+ reg = <0 0xee120000 0 0x2000>;
/* placeholder */
};
sdhi2: sd at ee140000 {
+ reg = <0 0xee140000 0 0x2000>;
/* placeholder */
};
sdhi3: sd at ee160000 {
+ reg = <0 0xee160000 0 0x2000>;
/* placeholder */
};
usb3_phy0: usb-phy at e65ee000 {
+ reg = <0 0xe65ee000 0 0x90>;
/* placeholder */
};
usb3_peri0: usb at ee020000 {
+ reg = <0 0xee020000 0 0x400>;
/* placeholder */
};
xhci0: usb at ee000000 {
+ reg = <0 0xee000000 0 0xc00>;
/* placeholder */
};
wdt0: watchdog at e6020000 {
+ reg = <0 0xe6020000 0 0x0c>;
/* placeholder */
};
};
--
2.7.4
More information about the linux-arm-kernel
mailing list