[PATCH v3 5/7] clk: sunxi-ng: add support for the Allwinner H6 CCU

Icenowy Zheng icenowy at aosc.io
Fri Feb 23 04:35:53 PST 2018


The Allwinner H6 SoC has a CCU which has been largely rearranged.

Add support for it in the sunxi-ng CCU framework.

Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
Acked-by: Rob Herring <robh at kernel.org>
---
Changes in v3:
- SPDX license idetifier fix.
- Add some comments at initialization.

Changes in v2:
- Exported APB1 bus clock for PIO.
- Switch to SPDX license identifier.

 .../devicetree/bindings/clock/sunxi-ccu.txt        |    1 +
 drivers/clk/sunxi-ng/Kconfig                       |    5 +
 drivers/clk/sunxi-ng/Makefile                      |    1 +
 drivers/clk/sunxi-ng/ccu-sun50i-h6.c               | 1207 ++++++++++++++++++++
 drivers/clk/sunxi-ng/ccu-sun50i-h6.h               |   56 +
 include/dt-bindings/clock/sun50i-h6-ccu.h          |  124 ++
 include/dt-bindings/reset/sun50i-h6-ccu.h          |   73 ++
 7 files changed, 1467 insertions(+)
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h6.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h6.h
 create mode 100644 include/dt-bindings/clock/sun50i-h6-ccu.h
 create mode 100644 include/dt-bindings/reset/sun50i-h6-ccu.h

diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index 4ca21c3a6fc9..9ae27881c924 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -20,6 +20,7 @@ Required properties :
 		- "allwinner,sun50i-a64-ccu"
 		- "allwinner,sun50i-a64-r-ccu"
 		- "allwinner,sun50i-h5-ccu"
+		- "allwinner,sun50i-h6-ccu"
 		- "nextthing,gr8-ccu"
 
 - reg: Must contain the registers base address and length
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 33168f94ee39..79dfd296c3d1 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -11,6 +11,11 @@ config SUN50I_A64_CCU
 	default ARM64 && ARCH_SUNXI
 	depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
 
+config SUN50I_H6_CCU
+	bool "Support for the Allwinner H6 CCU"
+	default ARM64 && ARCH_SUNXI
+	depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
+
 config SUN4I_A10_CCU
 	bool "Support for the Allwinner A10/A20 CCU"
 	default MACH_SUN4I
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 4141c3fe08ae..128a40ee5c5e 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -22,6 +22,7 @@ lib-$(CONFIG_SUNXI_CCU)		+= ccu_mp.o
 
 # SoC support
 obj-$(CONFIG_SUN50I_A64_CCU)	+= ccu-sun50i-a64.o
+obj-$(CONFIG_SUN50I_H6_CCU)	+= ccu-sun50i-h6.o
 obj-$(CONFIG_SUN4I_A10_CCU)	+= ccu-sun4i-a10.o
 obj-$(CONFIG_SUN5I_CCU)		+= ccu-sun5i.o
 obj-$(CONFIG_SUN6I_A31_CCU)	+= ccu-sun6i-a31.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
new file mode 100644
index 000000000000..d5eab49e6350
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
@@ -0,0 +1,1207 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017 Icenowy Zheng <icenowy at aosc.io>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+
+#include "ccu-sun50i-h6.h"
+
+/*
+ * The CPU PLL is actually NP clock, with P being /1, /2 or /4. However
+ * P should only be used for output frequencies lower than 288 MHz.
+ *
+ * For now we can just model it as a multiplier clock, and force P to /1.
+ *
+ * The M factor is present in the register's description, but not in the
+ * frequency formula, and it's documented as "M is only used for backdoor
+ * testing", so it's not modelled and then force to 0.
+ */
+#define SUN50I_H6_PLL_CPUX_REG		0x000
+static struct ccu_mult pll_cpux_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.mult		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.common		= {
+		.reg		= 0x000,
+		.hw.init	= CLK_HW_INIT("pll-cpux", "osc24M",
+					      &ccu_mult_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+/* Some PLLs are input * N / div1 / P. Model them as NKMP with no K */
+#define SUN50I_H6_PLL_DDR0_REG		0x010
+static struct ccu_nkmp pll_ddr0_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.common		= {
+		.reg		= 0x010,
+		.hw.init	= CLK_HW_INIT("pll-ddr0", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_H6_PLL_PERIPH0_REG	0x020
+static struct ccu_nkmp pll_periph0_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.fixed_post_div	= 4,
+	.common		= {
+		.reg		= 0x020,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-periph0", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_H6_PLL_PERIPH1_REG	0x028
+static struct ccu_nkmp pll_periph1_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.fixed_post_div	= 4,
+	.common		= {
+		.reg		= 0x028,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-periph1", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_H6_PLL_GPU_REG		0x030
+static struct ccu_nkmp pll_gpu_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.common		= {
+		.reg		= 0x030,
+		.hw.init	= CLK_HW_INIT("pll-gpu", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+/*
+ * For Video PLLs, the output divider is described as "used for testing"
+ * in the user manual. So it's not modelled and forced to 0.
+ */
+#define SUN50I_H6_PLL_VIDEO0_REG	0x040
+static struct ccu_nm pll_video0_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.fixed_post_div	= 4,
+	.common		= {
+		.reg		= 0x040,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-video0", "osc24M",
+					      &ccu_nm_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_H6_PLL_VIDEO1_REG	0x048
+static struct ccu_nm pll_video1_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.fixed_post_div	= 4,
+	.common		= {
+		.reg		= 0x048,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-video1", "osc24M",
+					      &ccu_nm_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_H6_PLL_VE_REG		0x058
+static struct ccu_nkmp pll_ve_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.common		= {
+		.reg		= 0x058,
+		.hw.init	= CLK_HW_INIT("pll-ve", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_H6_PLL_DE_REG		0x060
+static struct ccu_nkmp pll_de_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.common		= {
+		.reg		= 0x060,
+		.hw.init	= CLK_HW_INIT("pll-de", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_H6_PLL_HSIC_REG		0x070
+static struct ccu_nkmp pll_hsic_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.common		= {
+		.reg		= 0x070,
+		.hw.init	= CLK_HW_INIT("pll-hsic", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+/*
+ * The Audio PLL is supposed to have 3 outputs: 2 fixed factors from
+ * the base (2x and 4x), and one variable divider (the one true pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names.
+ */
+#define SUN50I_H6_PLL_AUDIO_REG		0x078
+static struct ccu_nm pll_audio_base_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.common		= {
+		.reg		= 0x078,
+		.hw.init	= CLK_HW_INIT("pll-audio-base", "osc24M",
+					      &ccu_nm_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+static const char * const cpux_parents[] = { "osc24M", "osc32k",
+					     "iosc", "pll-cpux" };
+static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
+		     0x500, 24, 2, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x500, 0, 2, 0);
+static SUNXI_CCU_M(cpux_apb_clk, "cpux-apb", "cpux", 0x500, 8, 2, 0);
+
+static const char * const psi_ahb1_ahb2_parents[] = { "osc24M", "osc32k",
+						      "iosc", "pll-periph0" };
+static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2",
+			     psi_ahb1_ahb2_parents,
+			     0x510,
+			     0, 5,	/* M */
+			     16, 2,	/* P */
+			     24, 2,	/* mux */
+			     0);
+
+static const char * const ahb3_apb1_apb2_parents[] = { "osc24M", "osc32k",
+						       "psi-ahb1-ahb2",
+						       "pll-periph0" };
+static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3", ahb3_apb1_apb2_parents, 0x51c,
+			     0, 5,	/* M */
+			     16, 2,	/* P */
+			     24, 2,	/* mux */
+			     0);
+
+static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", ahb3_apb1_apb2_parents, 0x520,
+			     0, 5,	/* M */
+			     16, 2,	/* P */
+			     24, 2,	/* mux */
+			     0);
+
+static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", ahb3_apb1_apb2_parents, 0x524,
+			     0, 5,	/* M */
+			     16, 2,	/* P */
+			     24, 2,	/* mux */
+			     0);
+
+static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x",
+					     "pll-ddr0", "pll-periph0-4x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, 0x540,
+				       0, 3,	/* M */
+				       24, 2,	/* mux */
+				       BIT(31),	/* gate */
+				       CLK_IS_CRITICAL);
+
+static const char * const de_parents[] = { "pll-de", "pll-periph0-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents, 0x600,
+				       0, 4,	/* M */
+				       24, 1,	/* mux */
+				       BIT(31),	/* gate */
+				       0);
+
+static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "psi-ahb1-ahb2",
+		      0x60c, BIT(0), 0);
+
+static const char * const deinterlace_parents[] = { "pll-periph0",
+						    "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace",
+				       deinterlace_parents,
+				       0x620,
+				       0, 4,	/* M */
+				       24, 1,	/* mux */
+				       BIT(31),	/* gate */
+				       0);
+
+static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "psi-ahb1-ahb2",
+		      0x62c, BIT(0), 0);
+
+static const char * const gpu_parents[] = { "pll-gpu" };
+static SUNXI_CCU_M_WITH_MUX_GATE(gpu_clk, "gpu", gpu_parents, 0x670,
+				       0, 3,	/* M */
+				       24, 1,	/* mux */
+				       BIT(31),	/* gate */
+				       0);
+
+static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "psi-ahb1-ahb2",
+		      0x67c, BIT(0), 0);
+
+/* Also applies to EMCE */
+static const char * const ce_parents[] = { "osc24M", "pll-periph0-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x680,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 1,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "psi-ahb1-ahb2",
+		      0x68c, BIT(0), 0);
+
+static const char * const ve_parents[] = { "pll-ve" };
+static SUNXI_CCU_M_WITH_MUX_GATE(ve_clk, "ve", ve_parents, 0x690,
+				       0, 3,	/* M */
+				       24, 1,	/* mux */
+				       BIT(31),	/* gate */
+				       0);
+
+static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "psi-ahb1-ahb2",
+		      0x69c, BIT(0), 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(emce_clk, "emce", ce_parents, 0x6b0,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 1,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_GATE(bus_emce_clk, "bus-emce", "psi-ahb1-ahb2",
+		      0x6bc, BIT(0), 0);
+
+static const char * const vp9_parents[] = { "pll-ve", "pll-periph0-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(vp9_clk, "vp9", vp9_parents, 0x6c0,
+				       0, 3,	/* M */
+				       24, 1,	/* mux */
+				       BIT(31),	/* gate */
+				       0);
+
+static SUNXI_CCU_GATE(bus_vp9_clk, "bus-vp9", "psi-ahb1-ahb2",
+		      0x6cc, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "psi-ahb1-ahb2",
+		      0x70c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "psi-ahb1-ahb2",
+		      0x71c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "psi-ahb1-ahb2",
+		      0x72c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "psi-ahb1-ahb2",
+		      0x73c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M", 0x740, BIT(31), 0);
+
+static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "psi-ahb1-ahb2",
+		      0x78c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_psi_clk, "bus-psi", "psi-ahb1-ahb2",
+		      0x79c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_pwm_clk, "bus-pwm", "apb1", 0x79c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_iommu_clk, "bus-iommu", "apb1", 0x7bc, BIT(0), 0);
+
+static const char * const dram_parents[] = { "pll-ddr0" };
+static struct ccu_div dram_clk = {
+	.div		= _SUNXI_CCU_DIV(0, 2),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common	= {
+		.reg		= 0x800,
+		.hw.init	= CLK_HW_INIT_PARENTS("dram",
+						      dram_parents,
+						      &ccu_div_ops,
+						      CLK_IS_CRITICAL),
+	},
+};
+
+static SUNXI_CCU_GATE(mbus_dma_clk, "mbus-dma", "mbus",
+		      0x804, BIT(0), 0);
+static SUNXI_CCU_GATE(mbus_ve_clk, "mbus-ve", "mbus",
+		      0x804, BIT(1), 0);
+static SUNXI_CCU_GATE(mbus_ce_clk, "mbus-ce", "mbus",
+		      0x804, BIT(2), 0);
+static SUNXI_CCU_GATE(mbus_ts_clk, "mbus-ts", "mbus",
+		      0x804, BIT(3), 0);
+static SUNXI_CCU_GATE(mbus_nand_clk, "mbus-nand", "mbus",
+		      0x804, BIT(5), 0);
+static SUNXI_CCU_GATE(mbus_csi_clk, "mbus-csi", "mbus",
+		      0x804, BIT(8), 0);
+static SUNXI_CCU_GATE(mbus_deinterlace_clk, "mbus-deinterlace", "mbus",
+		      0x804, BIT(11), 0);
+
+static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "psi-ahb1-ahb2",
+		      0x80c, BIT(0), CLK_IS_CRITICAL);
+
+static const char * const nand_spi_parents[] = { "osc24M", "pll-periph0",
+					     "pll-periph1", "pll-periph0-2x",
+					     "pll-periph1-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand0_clk, "nand0", nand_spi_parents, 0x810,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 3,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand1_clk, "nand1", nand_spi_parents, 0x814,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 3,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb3", 0x82c, BIT(0), 0);
+
+static const char * const mmc_parents[] = { "osc24M", "pll-periph0-2x",
+					    "pll-periph1-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mmc_parents, 0x830,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 3,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mmc_parents, 0x834,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 3,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mmc_parents, 0x838,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 3,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb3", 0x84c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb3", 0x84c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb3", 0x84c, BIT(2), 0);
+
+static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2", 0x90c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2", 0x90c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2", 0x90c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2", 0x90c, BIT(3), 0);
+
+static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2", 0x91c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2", 0x91c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2", 0x91c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb2", 0x91c, BIT(3), 0);
+
+static SUNXI_CCU_GATE(bus_scr0_clk, "bus-scr0", "apb2", 0x93c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_scr1_clk, "bus-scr1", "apb2", 0x93c, BIT(1), 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", nand_spi_parents, 0x940,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 3,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", nand_spi_parents, 0x944,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 3,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb3", 0x96c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb3", 0x96c, BIT(1), 0);
+
+static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb3", 0x97c, BIT(0), 0);
+
+static const char * const ts_parents[] = { "osc24M", "pll-periph0" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x9b0,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 1,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb3", 0x9bc, BIT(0), 0);
+
+static const char * const ir_tx_parents[] = { "osc32k", "osc24M" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir_tx_clk, "ir-tx", ir_tx_parents, 0x9c0,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 1,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_GATE(bus_ir_tx_clk, "bus-ir-tx", "apb1", 0x9cc, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1", 0x9fc, BIT(0), 0);
+
+static const char * const audio_parents[] = { "pll-audio", "pll-audio-2x", "pll-audio-4x" };
+static struct ccu_div i2s3_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa0c,
+		.hw.init	= CLK_HW_INIT_PARENTS("i2s3",
+						      audio_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static struct ccu_div i2s0_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa10,
+		.hw.init	= CLK_HW_INIT_PARENTS("i2s0",
+						      audio_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static struct ccu_div i2s1_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa14,
+		.hw.init	= CLK_HW_INIT_PARENTS("i2s1",
+						      audio_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static struct ccu_div i2s2_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa18,
+		.hw.init	= CLK_HW_INIT_PARENTS("i2s2",
+						      audio_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1", 0xa1c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1", 0xa1c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_i2s2_clk, "bus-i2s2", "apb1", 0xa1c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_i2s3_clk, "bus-i2s3", "apb1", 0xa1c, BIT(3), 0);
+
+static struct ccu_div spdif_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa20,
+		.hw.init	= CLK_HW_INIT_PARENTS("spdif",
+						      audio_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1", 0xa2c, BIT(0), 0);
+
+static struct ccu_div dmic_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa40,
+		.hw.init	= CLK_HW_INIT_PARENTS("dmic",
+						      audio_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_dmic_clk, "bus-dmic", "apb1", 0xa4c, BIT(0), 0);
+
+static struct ccu_div audio_hub_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa60,
+		.hw.init	= CLK_HW_INIT_PARENTS("audio-hub",
+						      audio_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_audio_hub_clk, "bus-audio-hub", "apb1", 0xa6c, BIT(0), 0);
+
+/*
+ * There are OHCI 12M clock source selection bits for 2 USB 2.0 ports.
+ * We will force them to 0 (12M divided from 48M).
+ */
+#define SUN50I_H6_USB0_CLK_REG		0xa70
+#define SUN50I_H6_USB3_CLK_REG		0xa7c
+
+static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M", 0xa70, BIT(31), 0);
+static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M", 0xa70, BIT(29), 0);
+
+static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M", 0xa74, BIT(29), 0);
+
+static SUNXI_CCU_GATE(usb_ohci3_clk, "usb-ohci3", "osc12M", 0xa7c, BIT(31), 0);
+static SUNXI_CCU_GATE(usb_phy3_clk, "usb-phy3", "osc12M", 0xa7c, BIT(29), 0);
+static SUNXI_CCU_GATE(usb_hsic_12m_clk, "usb-hsic-12M", "osc12M", 0xa7c, BIT(27), 0);
+static SUNXI_CCU_GATE(usb_hsic_clk, "usb-hsic", "pll-hsic", 0xa7c, BIT(26), 0);
+
+static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb3", 0xa8c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_ohci3_clk, "bus-ohci3", "ahb3", 0xa8c, BIT(3), 0);
+static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb3", 0xa8c, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_xhci_clk, "bus-xhci", "ahb3", 0xa8c, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_ehci3_clk, "bus-ehci3", "ahb3", 0xa8c, BIT(7), 0);
+static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb3", 0xa8c, BIT(8), 0);
+
+static CLK_FIXED_FACTOR(pcie_ref_100m_clk, "pcie-ref-100M",
+			"pll-periph0-4x", 24, 1, 0);
+static SUNXI_CCU_GATE(pcie_ref_clk, "pcie-ref", "pcie-ref-100M",
+		      0xab0, BIT(31), 0);
+static SUNXI_CCU_GATE(pcie_ref_out_clk, "pcie-ref-out", "pcie-ref",
+		      0xab0, BIT(30), 0);
+
+static SUNXI_CCU_M_WITH_GATE(pcie_maxi_clk, "pcie-maxi",
+			     "pll-periph0", 0xab4,
+			     0, 4,	/* M */
+			     BIT(31),	/* gate */
+			     0);
+
+static SUNXI_CCU_M_WITH_GATE(pcie_aux_clk, "pcie-aux", "osc24M", 0xab8,
+			     0, 5,	/* M */
+			     BIT(31),	/* gate */
+			     0);
+
+static SUNXI_CCU_GATE(bus_pcie_clk, "bus-pcie", "psi-ahb1-ahb2",
+		      0xabc, BIT(0), 0);
+
+static const char * const hdmi_parents[] = { "pll-video0", "pll-video1",
+					      "pll-video1-4x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents, 0xb00,
+				 0, 4,		/* M */
+				 24, 2,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+static const char * const hdmi_cec_parents[] = { "osc32k", "pll-periph0-2x" };
+static const struct ccu_mux_fixed_prediv hdmi_cec_predivs[] = {
+	{ .index = 1, .div = 36621 },
+};
+static struct ccu_mux hdmi_cec_clk = {
+	.enable		= BIT(31),
+
+	.mux		= {
+		.shift	= 24,
+		.width	= 2,
+
+		.fixed_predivs	= hdmi_cec_predivs,
+		.n_predivs	= ARRAY_SIZE(hdmi_cec_predivs),
+	},
+
+	.common		= {
+		.reg		= 0xb10,
+		.features	= CCU_FEATURE_VARIABLE_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("hdmi-cec",
+						      hdmi_cec_parents,
+						      &ccu_mux_ops,
+						      0),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb3", 0xb1c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_tcon_top_clk, "bus-tcon-top", "ahb3",
+		      0xb5c, BIT(0), 0);
+
+static const char * const tcon_lcd0_parents[] = { "pll-video0",
+						  "pll-video0-4x",
+						  "pll-video1" };
+static SUNXI_CCU_MUX_WITH_GATE(tcon_lcd0_clk, "tcon-lcd0",
+			       tcon_lcd0_parents, 0xb60,
+			       24, 3,	/* mux */
+			       BIT(31),	/* gate */
+			       0);
+
+static SUNXI_CCU_GATE(bus_tcon_lcd0_clk, "bus-tcon-lcd0", "ahb3",
+		      0xb7c, BIT(0), 0);
+
+static const char * const tcon_tv0_parents[] = { "pll-video0",
+						 "pll-video0-4x",
+						 "pll-video1",
+						 "pll-video1-4x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_tv0_clk, "tcon-tv0",
+				  tcon_tv0_parents, 0xb80,
+				  0, 4,		/* M */
+				  8, 2,		/* P */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_GATE(bus_tcon_tv0_clk, "bus-tcon-tv0", "ahb3",
+		      0xb9c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(csi_cci_clk, "csi-cci", "osc24M", 0xc00, BIT(0), 0);
+
+static const char * const csi_top_parents[] = { "pll-video0", "pll-ve",
+					      "pll-periph0" };
+static const u8 csi_top_table[] = { 0, 2, 3 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi_top_clk, "csi-top",
+				       csi_top_parents, csi_top_table, 0xc04,
+				       0, 4,	/* M */
+				       24, 3,	/* mux */
+				       BIT(31),	/* gate */
+				       0);
+
+static const char * const csi_mclk_parents[] = { "osc24M", "pll-video0",
+					       "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi_mclk_clk, "csi-mclk",
+				 csi_mclk_parents, 0xc08,
+				 0, 5,		/* M */
+				 24, 3,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb3", 0xc2c, BIT(0), 0);
+
+static const char * const hdcp_parents[] = { "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdcp_clk, "hdcp", hdcp_parents, 0xc40,
+				 0, 4,		/* M */
+				 24, 2,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+static SUNXI_CCU_GATE(bus_hdcp_clk, "bus-hdcp", "ahb3", 0xc4c, BIT(0), 0);
+
+/* Fixed factor clocks */
+static CLK_FIXED_FACTOR(osc12M_clk, "osc12M", "osc24M", 2, 1, 0);
+
+/*
+ * The divider of pll-audio is fixed to 8 now, as pll-audio-4x has a
+ * fixed post-divider 2.
+ */
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+			"pll-audio-base", 8, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+			"pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+			"pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+
+static CLK_FIXED_FACTOR(pll_periph0_4x_clk, "pll-periph0-4x",
+			"pll-periph0", 1, 4, 0);
+static CLK_FIXED_FACTOR(pll_periph0_2x_clk, "pll-periph0-2x",
+			"pll-periph0", 1, 2, 0);
+
+static CLK_FIXED_FACTOR(pll_periph1_4x_clk, "pll-periph1-4x",
+			"pll-periph1", 1, 4, 0);
+static CLK_FIXED_FACTOR(pll_periph1_2x_clk, "pll-periph1-2x",
+			"pll-periph1", 1, 2, 0);
+
+static CLK_FIXED_FACTOR(pll_video0_4x_clk, "pll-video0-4x",
+			"pll-video0", 1, 4, CLK_SET_RATE_PARENT);
+
+static CLK_FIXED_FACTOR(pll_video1_4x_clk, "pll-video1-4x",
+			"pll-video1", 1, 4, CLK_SET_RATE_PARENT);
+
+static struct ccu_common *sun50i_h6_ccu_clks[] = {
+	&pll_cpux_clk.common,
+	&pll_ddr0_clk.common,
+	&pll_periph0_clk.common,
+	&pll_periph1_clk.common,
+	&pll_gpu_clk.common,
+	&pll_video0_clk.common,
+	&pll_video1_clk.common,
+	&pll_ve_clk.common,
+	&pll_de_clk.common,
+	&pll_hsic_clk.common,
+	&pll_audio_base_clk.common,
+	&cpux_clk.common,
+	&axi_clk.common,
+	&cpux_apb_clk.common,
+	&psi_ahb1_ahb2_clk.common,
+	&ahb3_clk.common,
+	&apb1_clk.common,
+	&apb2_clk.common,
+	&mbus_clk.common,
+	&de_clk.common,
+	&bus_de_clk.common,
+	&deinterlace_clk.common,
+	&bus_deinterlace_clk.common,
+	&gpu_clk.common,
+	&bus_gpu_clk.common,
+	&ce_clk.common,
+	&bus_ce_clk.common,
+	&ve_clk.common,
+	&bus_ve_clk.common,
+	&emce_clk.common,
+	&bus_emce_clk.common,
+	&vp9_clk.common,
+	&bus_vp9_clk.common,
+	&bus_dma_clk.common,
+	&bus_msgbox_clk.common,
+	&bus_spinlock_clk.common,
+	&bus_hstimer_clk.common,
+	&avs_clk.common,
+	&bus_dbg_clk.common,
+	&bus_psi_clk.common,
+	&bus_pwm_clk.common,
+	&bus_iommu_clk.common,
+	&dram_clk.common,
+	&mbus_dma_clk.common,
+	&mbus_ve_clk.common,
+	&mbus_ce_clk.common,
+	&mbus_ts_clk.common,
+	&mbus_nand_clk.common,
+	&mbus_csi_clk.common,
+	&mbus_deinterlace_clk.common,
+	&bus_dram_clk.common,
+	&nand0_clk.common,
+	&nand1_clk.common,
+	&bus_nand_clk.common,
+	&mmc0_clk.common,
+	&mmc1_clk.common,
+	&mmc2_clk.common,
+	&bus_mmc0_clk.common,
+	&bus_mmc1_clk.common,
+	&bus_mmc2_clk.common,
+	&bus_uart0_clk.common,
+	&bus_uart1_clk.common,
+	&bus_uart2_clk.common,
+	&bus_uart3_clk.common,
+	&bus_i2c0_clk.common,
+	&bus_i2c1_clk.common,
+	&bus_i2c2_clk.common,
+	&bus_i2c3_clk.common,
+	&bus_scr0_clk.common,
+	&bus_scr1_clk.common,
+	&spi0_clk.common,
+	&spi1_clk.common,
+	&bus_spi0_clk.common,
+	&bus_spi1_clk.common,
+	&bus_emac_clk.common,
+	&ts_clk.common,
+	&bus_ts_clk.common,
+	&ir_tx_clk.common,
+	&bus_ir_tx_clk.common,
+	&bus_ths_clk.common,
+	&i2s3_clk.common,
+	&i2s0_clk.common,
+	&i2s1_clk.common,
+	&i2s2_clk.common,
+	&bus_i2s0_clk.common,
+	&bus_i2s1_clk.common,
+	&bus_i2s2_clk.common,
+	&bus_i2s3_clk.common,
+	&spdif_clk.common,
+	&bus_spdif_clk.common,
+	&dmic_clk.common,
+	&bus_dmic_clk.common,
+	&audio_hub_clk.common,
+	&bus_audio_hub_clk.common,
+	&usb_ohci0_clk.common,
+	&usb_phy0_clk.common,
+	&usb_phy1_clk.common,
+	&usb_ohci3_clk.common,
+	&usb_phy3_clk.common,
+	&usb_hsic_12m_clk.common,
+	&usb_hsic_clk.common,
+	&bus_ohci0_clk.common,
+	&bus_ohci3_clk.common,
+	&bus_ehci0_clk.common,
+	&bus_xhci_clk.common,
+	&bus_ehci3_clk.common,
+	&bus_otg_clk.common,
+	&pcie_ref_clk.common,
+	&pcie_ref_out_clk.common,
+	&pcie_maxi_clk.common,
+	&pcie_aux_clk.common,
+	&bus_pcie_clk.common,
+	&hdmi_clk.common,
+	&hdmi_cec_clk.common,
+	&bus_hdmi_clk.common,
+	&bus_tcon_top_clk.common,
+	&tcon_lcd0_clk.common,
+	&bus_tcon_lcd0_clk.common,
+	&tcon_tv0_clk.common,
+	&bus_tcon_tv0_clk.common,
+	&csi_cci_clk.common,
+	&csi_top_clk.common,
+	&csi_mclk_clk.common,
+	&bus_csi_clk.common,
+	&hdcp_clk.common,
+	&bus_hdcp_clk.common,
+};
+
+static struct clk_hw_onecell_data sun50i_h6_hw_clks = {
+	.hws	= {
+		[CLK_OSC12M]		= &osc12M_clk.hw,
+		[CLK_PLL_CPUX]		= &pll_cpux_clk.common.hw,
+		[CLK_PLL_DDR0]		= &pll_ddr0_clk.common.hw,
+		[CLK_PLL_PERIPH0]	= &pll_periph0_clk.common.hw,
+		[CLK_PLL_PERIPH0_2X]	= &pll_periph0_2x_clk.hw,
+		[CLK_PLL_PERIPH0_4X]	= &pll_periph0_4x_clk.hw,
+		[CLK_PLL_PERIPH1]	= &pll_periph1_clk.common.hw,
+		[CLK_PLL_PERIPH1_2X]	= &pll_periph1_2x_clk.hw,
+		[CLK_PLL_PERIPH1_4X]	= &pll_periph1_4x_clk.hw,
+		[CLK_PLL_GPU]		= &pll_gpu_clk.common.hw,
+		[CLK_PLL_VIDEO0]	= &pll_video0_clk.common.hw,
+		[CLK_PLL_VIDEO0_4X]	= &pll_video0_4x_clk.hw,
+		[CLK_PLL_VIDEO1]	= &pll_video1_clk.common.hw,
+		[CLK_PLL_VIDEO1_4X]	= &pll_video1_4x_clk.hw,
+		[CLK_PLL_VE]		= &pll_ve_clk.common.hw,
+		[CLK_PLL_DE]		= &pll_de_clk.common.hw,
+		[CLK_PLL_HSIC]		= &pll_hsic_clk.common.hw,
+		[CLK_PLL_AUDIO_BASE]	= &pll_audio_base_clk.common.hw,
+		[CLK_PLL_AUDIO]		= &pll_audio_clk.hw,
+		[CLK_PLL_AUDIO_2X]	= &pll_audio_2x_clk.hw,
+		[CLK_PLL_AUDIO_4X]	= &pll_audio_4x_clk.hw,
+		[CLK_CPUX]		= &cpux_clk.common.hw,
+		[CLK_AXI]		= &axi_clk.common.hw,
+		[CLK_CPUX_APB]		= &cpux_apb_clk.common.hw,
+		[CLK_PSI_AHB1_AHB2]	= &psi_ahb1_ahb2_clk.common.hw,
+		[CLK_AHB3]		= &ahb3_clk.common.hw,
+		[CLK_APB1]		= &apb1_clk.common.hw,
+		[CLK_APB2]		= &apb2_clk.common.hw,
+		[CLK_MBUS]		= &mbus_clk.common.hw,
+		[CLK_DE]		= &de_clk.common.hw,
+		[CLK_BUS_DE]		= &bus_de_clk.common.hw,
+		[CLK_DEINTERLACE]	= &deinterlace_clk.common.hw,
+		[CLK_BUS_DEINTERLACE]	= &bus_deinterlace_clk.common.hw,
+		[CLK_GPU]		= &gpu_clk.common.hw,
+		[CLK_BUS_GPU]		= &bus_gpu_clk.common.hw,
+		[CLK_CE]		= &ce_clk.common.hw,
+		[CLK_BUS_CE]		= &bus_ce_clk.common.hw,
+		[CLK_VE]		= &ve_clk.common.hw,
+		[CLK_BUS_VE]		= &bus_ve_clk.common.hw,
+		[CLK_EMCE]		= &emce_clk.common.hw,
+		[CLK_BUS_EMCE]		= &bus_emce_clk.common.hw,
+		[CLK_VP9]		= &vp9_clk.common.hw,
+		[CLK_BUS_VP9]		= &bus_vp9_clk.common.hw,
+		[CLK_BUS_DMA]		= &bus_dma_clk.common.hw,
+		[CLK_BUS_MSGBOX]	= &bus_msgbox_clk.common.hw,
+		[CLK_BUS_SPINLOCK]	= &bus_spinlock_clk.common.hw,
+		[CLK_BUS_HSTIMER]	= &bus_hstimer_clk.common.hw,
+		[CLK_AVS]		= &avs_clk.common.hw,
+		[CLK_BUS_DBG]		= &bus_dbg_clk.common.hw,
+		[CLK_BUS_PSI]		= &bus_psi_clk.common.hw,
+		[CLK_BUS_PWM]		= &bus_pwm_clk.common.hw,
+		[CLK_BUS_IOMMU]		= &bus_iommu_clk.common.hw,
+		[CLK_DRAM]		= &dram_clk.common.hw,
+		[CLK_MBUS_DMA]		= &mbus_dma_clk.common.hw,
+		[CLK_MBUS_VE]		= &mbus_ve_clk.common.hw,
+		[CLK_MBUS_CE]		= &mbus_ce_clk.common.hw,
+		[CLK_MBUS_TS]		= &mbus_ts_clk.common.hw,
+		[CLK_MBUS_NAND]		= &mbus_nand_clk.common.hw,
+		[CLK_MBUS_CSI]		= &mbus_csi_clk.common.hw,
+		[CLK_MBUS_DEINTERLACE]	= &mbus_deinterlace_clk.common.hw,
+		[CLK_BUS_DRAM]		= &bus_dram_clk.common.hw,
+		[CLK_NAND0]		= &nand0_clk.common.hw,
+		[CLK_NAND1]		= &nand1_clk.common.hw,
+		[CLK_BUS_NAND]		= &bus_nand_clk.common.hw,
+		[CLK_MMC0]		= &mmc0_clk.common.hw,
+		[CLK_MMC1]		= &mmc1_clk.common.hw,
+		[CLK_MMC2]		= &mmc2_clk.common.hw,
+		[CLK_BUS_MMC0]		= &bus_mmc0_clk.common.hw,
+		[CLK_BUS_MMC1]		= &bus_mmc1_clk.common.hw,
+		[CLK_BUS_MMC2]		= &bus_mmc2_clk.common.hw,
+		[CLK_BUS_UART0]		= &bus_uart0_clk.common.hw,
+		[CLK_BUS_UART1]		= &bus_uart1_clk.common.hw,
+		[CLK_BUS_UART2]		= &bus_uart2_clk.common.hw,
+		[CLK_BUS_UART3]		= &bus_uart3_clk.common.hw,
+		[CLK_BUS_I2C0]		= &bus_i2c0_clk.common.hw,
+		[CLK_BUS_I2C1]		= &bus_i2c1_clk.common.hw,
+		[CLK_BUS_I2C2]		= &bus_i2c2_clk.common.hw,
+		[CLK_BUS_I2C3]		= &bus_i2c3_clk.common.hw,
+		[CLK_BUS_SCR0]		= &bus_scr0_clk.common.hw,
+		[CLK_BUS_SCR1]		= &bus_scr1_clk.common.hw,
+		[CLK_SPI0]		= &spi0_clk.common.hw,
+		[CLK_SPI1]		= &spi1_clk.common.hw,
+		[CLK_BUS_SPI0]		= &bus_spi0_clk.common.hw,
+		[CLK_BUS_SPI1]		= &bus_spi1_clk.common.hw,
+		[CLK_BUS_EMAC]		= &bus_emac_clk.common.hw,
+		[CLK_TS]		= &ts_clk.common.hw,
+		[CLK_BUS_TS]		= &bus_ts_clk.common.hw,
+		[CLK_IR_TX]		= &ir_tx_clk.common.hw,
+		[CLK_BUS_IR_TX]		= &bus_ir_tx_clk.common.hw,
+		[CLK_BUS_THS]		= &bus_ths_clk.common.hw,
+		[CLK_I2S3]		= &i2s3_clk.common.hw,
+		[CLK_I2S0]		= &i2s0_clk.common.hw,
+		[CLK_I2S1]		= &i2s1_clk.common.hw,
+		[CLK_I2S2]		= &i2s2_clk.common.hw,
+		[CLK_BUS_I2S0]		= &bus_i2s0_clk.common.hw,
+		[CLK_BUS_I2S1]		= &bus_i2s1_clk.common.hw,
+		[CLK_BUS_I2S2]		= &bus_i2s2_clk.common.hw,
+		[CLK_BUS_I2S3]		= &bus_i2s3_clk.common.hw,
+		[CLK_SPDIF]		= &spdif_clk.common.hw,
+		[CLK_BUS_SPDIF]		= &bus_spdif_clk.common.hw,
+		[CLK_DMIC]		= &dmic_clk.common.hw,
+		[CLK_BUS_DMIC]		= &bus_dmic_clk.common.hw,
+		[CLK_AUDIO_HUB]		= &audio_hub_clk.common.hw,
+		[CLK_BUS_AUDIO_HUB]	= &bus_audio_hub_clk.common.hw,
+		[CLK_USB_OHCI0]		= &usb_ohci0_clk.common.hw,
+		[CLK_USB_PHY0]		= &usb_phy0_clk.common.hw,
+		[CLK_USB_PHY1]		= &usb_phy1_clk.common.hw,
+		[CLK_USB_OHCI3]		= &usb_ohci3_clk.common.hw,
+		[CLK_USB_PHY3]		= &usb_phy3_clk.common.hw,
+		[CLK_USB_HSIC_12M]	= &usb_hsic_12m_clk.common.hw,
+		[CLK_USB_HSIC]		= &usb_hsic_clk.common.hw,
+		[CLK_BUS_OHCI0]		= &bus_ohci0_clk.common.hw,
+		[CLK_BUS_OHCI3]		= &bus_ohci3_clk.common.hw,
+		[CLK_BUS_EHCI0]		= &bus_ehci0_clk.common.hw,
+		[CLK_BUS_XHCI]		= &bus_xhci_clk.common.hw,
+		[CLK_BUS_EHCI3]		= &bus_ehci3_clk.common.hw,
+		[CLK_BUS_OTG]		= &bus_otg_clk.common.hw,
+		[CLK_PCIE_REF_100M]	= &pcie_ref_100m_clk.hw,
+		[CLK_PCIE_REF]		= &pcie_ref_clk.common.hw,
+		[CLK_PCIE_REF_OUT]	= &pcie_ref_out_clk.common.hw,
+		[CLK_PCIE_MAXI]		= &pcie_maxi_clk.common.hw,
+		[CLK_PCIE_AUX]		= &pcie_aux_clk.common.hw,
+		[CLK_BUS_PCIE]		= &bus_pcie_clk.common.hw,
+		[CLK_HDMI]		= &hdmi_clk.common.hw,
+		[CLK_HDMI_CEC]		= &hdmi_cec_clk.common.hw,
+		[CLK_BUS_HDMI]		= &bus_hdmi_clk.common.hw,
+		[CLK_BUS_TCON_TOP]	= &bus_tcon_top_clk.common.hw,
+		[CLK_TCON_LCD0]		= &tcon_lcd0_clk.common.hw,
+		[CLK_BUS_TCON_LCD0]	= &bus_tcon_lcd0_clk.common.hw,
+		[CLK_TCON_TV0]		= &tcon_tv0_clk.common.hw,
+		[CLK_BUS_TCON_TV0]	= &bus_tcon_tv0_clk.common.hw,
+		[CLK_CSI_CCI]		= &csi_cci_clk.common.hw,
+		[CLK_CSI_TOP]		= &csi_top_clk.common.hw,
+		[CLK_CSI_MCLK]		= &csi_mclk_clk.common.hw,
+		[CLK_BUS_CSI]		= &bus_csi_clk.common.hw,
+		[CLK_HDCP]		= &hdcp_clk.common.hw,
+		[CLK_BUS_HDCP]		= &bus_hdcp_clk.common.hw,
+	},
+	.num = CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun50i_h6_ccu_resets[] = {
+	[RST_MBUS]		= { 0x540, BIT(30) },
+
+	[RST_BUS_DE]		= { 0x60c, BIT(16) },
+	[RST_BUS_DEINTERLACE]	= { 0x62c, BIT(16) },
+	[RST_BUS_GPU]		= { 0x67c, BIT(16) },
+	[RST_BUS_CE]		= { 0x68c, BIT(16) },
+	[RST_BUS_VE]		= { 0x69c, BIT(16) },
+	[RST_BUS_EMCE]		= { 0x6bc, BIT(16) },
+	[RST_BUS_VP9]		= { 0x6cc, BIT(16) },
+	[RST_BUS_DMA]		= { 0x70c, BIT(16) },
+	[RST_BUS_MSGBOX]	= { 0x71c, BIT(16) },
+	[RST_BUS_SPINLOCK]	= { 0x72c, BIT(16) },
+	[RST_BUS_HSTIMER]	= { 0x73c, BIT(16) },
+	[RST_BUS_DBG]		= { 0x78c, BIT(16) },
+	[RST_BUS_PSI]		= { 0x79c, BIT(16) },
+	[RST_BUS_PWM]		= { 0x7ac, BIT(16) },
+	[RST_BUS_IOMMU]		= { 0x7bc, BIT(16) },
+	[RST_BUS_DRAM]		= { 0x80c, BIT(16) },
+	[RST_BUS_NAND]		= { 0x82c, BIT(16) },
+	[RST_BUS_MMC0]		= { 0x84c, BIT(16) },
+	[RST_BUS_MMC1]		= { 0x84c, BIT(17) },
+	[RST_BUS_MMC2]		= { 0x84c, BIT(18) },
+	[RST_BUS_UART0]		= { 0x90c, BIT(16) },
+	[RST_BUS_UART1]		= { 0x90c, BIT(17) },
+	[RST_BUS_UART2]		= { 0x90c, BIT(18) },
+	[RST_BUS_UART3]		= { 0x90c, BIT(19) },
+	[RST_BUS_I2C0]		= { 0x91c, BIT(16) },
+	[RST_BUS_I2C1]		= { 0x91c, BIT(17) },
+	[RST_BUS_I2C2]		= { 0x91c, BIT(18) },
+	[RST_BUS_I2C3]		= { 0x91c, BIT(19) },
+	[RST_BUS_SCR0]		= { 0x93c, BIT(16) },
+	[RST_BUS_SCR1]		= { 0x93c, BIT(17) },
+	[RST_BUS_SPI0]		= { 0x96c, BIT(16) },
+	[RST_BUS_SPI1]		= { 0x96c, BIT(17) },
+	[RST_BUS_EMAC]		= { 0x97c, BIT(16) },
+	[RST_BUS_TS]		= { 0x9bc, BIT(16) },
+	[RST_BUS_IR_TX]		= { 0x9cc, BIT(16) },
+	[RST_BUS_THS]		= { 0x9fc, BIT(16) },
+	[RST_BUS_I2S0]		= { 0xa1c, BIT(16) },
+	[RST_BUS_I2S1]		= { 0xa1c, BIT(17) },
+	[RST_BUS_I2S2]		= { 0xa1c, BIT(18) },
+	[RST_BUS_I2S3]		= { 0xa1c, BIT(19) },
+	[RST_BUS_SPDIF]		= { 0xa2c, BIT(16) },
+	[RST_BUS_DMIC]		= { 0xa4c, BIT(16) },
+	[RST_BUS_AUDIO_HUB]	= { 0xa6c, BIT(16) },
+
+	[RST_USB_PHY0]		= { 0xa70, BIT(30) },
+	[RST_USB_PHY1]		= { 0xa74, BIT(30) },
+	[RST_USB_PHY3]		= { 0xa7c, BIT(30) },
+	[RST_USB_HSIC]		= { 0xa7c, BIT(28) },
+
+	[RST_BUS_OHCI0]		= { 0xa8c, BIT(16) },
+	[RST_BUS_OHCI3]		= { 0xa8c, BIT(19) },
+	[RST_BUS_EHCI0]		= { 0xa8c, BIT(20) },
+	[RST_BUS_XHCI]		= { 0xa8c, BIT(21) },
+	[RST_BUS_EHCI3]		= { 0xa8c, BIT(23) },
+	[RST_BUS_OTG]		= { 0xa8c, BIT(24) },
+	[RST_BUS_PCIE]		= { 0xabc, BIT(16) },
+
+	[RST_PCIE_POWERUP]	= { 0xabc, BIT(17) },
+
+	[RST_BUS_HDMI]		= { 0xb1c, BIT(16) },
+	[RST_BUS_HDMI_SUB]	= { 0xb1c, BIT(17) },
+	[RST_BUS_TCON_TOP]	= { 0xb5c, BIT(16) },
+	[RST_BUS_TCON_LCD0]	= { 0xb7c, BIT(16) },
+	[RST_BUS_TCON_TV0]	= { 0xb9c, BIT(16) },
+	[RST_BUS_CSI]		= { 0xc2c, BIT(16) },
+	[RST_BUS_HDCP]		= { 0xc4c, BIT(16) },
+};
+
+static const struct sunxi_ccu_desc sun50i_h6_ccu_desc = {
+	.ccu_clks	= sun50i_h6_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun50i_h6_ccu_clks),
+
+	.hw_clks	= &sun50i_h6_hw_clks,
+
+	.resets		= sun50i_h6_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun50i_h6_ccu_resets),
+};
+
+static const u32 pll_regs[] = {
+	SUN50I_H6_PLL_CPUX_REG,
+	SUN50I_H6_PLL_DDR0_REG,
+	SUN50I_H6_PLL_PERIPH0_REG,
+	SUN50I_H6_PLL_PERIPH1_REG,
+	SUN50I_H6_PLL_GPU_REG,
+	SUN50I_H6_PLL_VIDEO0_REG,
+	SUN50I_H6_PLL_VIDEO1_REG,
+	SUN50I_H6_PLL_VE_REG,
+	SUN50I_H6_PLL_DE_REG,
+	SUN50I_H6_PLL_HSIC_REG,
+	SUN50I_H6_PLL_AUDIO_REG,
+};
+
+static const u32 pll_video_regs[] = {
+	SUN50I_H6_PLL_VIDEO0_REG,
+	SUN50I_H6_PLL_VIDEO1_REG,
+};
+
+static const u32 usb2_clk_regs[] = {
+	SUN50I_H6_USB0_CLK_REG,
+	SUN50I_H6_USB3_CLK_REG,
+};
+
+static int sun50i_h6_ccu_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	void __iomem *reg;
+	u32 val;
+	int i;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	reg = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	/* Enable the lock bits on all PLLs */
+	for (i = 0; i < ARRAY_SIZE(pll_regs); i++) {
+		val = readl(reg + pll_regs[i]);
+		val |= BIT(29);
+		writel(val, reg + pll_regs[i]);
+	}
+
+	/*
+	 * Force the output divider of video PLLs to 0.
+	 *
+	 * See the comment before pll-video0 definition for the reason.
+	 */
+	for (i = 0; i < ARRAY_SIZE(pll_video_regs); i++) {
+		val = readl(reg + pll_video_regs[i]);
+		val &= ~BIT(0);
+		writel(val, reg + pll_video_regs[i]);
+	}
+
+	/*
+	 * Force OHCI 12M clock sources to 00 (12MHz divided from 48MHz)
+	 *
+	 * This clock mux is still mysterious, and the code just enforces
+	 * it to have a valid clock parent.
+	 */
+	for (i = 0; i < ARRAY_SIZE(usb2_clk_regs); i++) {
+		val = readl(reg + usb2_clk_regs[i]);
+		val &= ~GENMASK(25, 24);
+		writel (val, reg + usb2_clk_regs[i]);
+	}
+
+	/*
+	 * Force the post-divider of pll-audio to 8 and the output divider
+	 * of it to 1, to make the clock name represents the real frequency.
+	 */
+	val = readl(reg + SUN50I_H6_PLL_AUDIO_REG);
+	val &= ~(GENMASK(21, 16) | BIT(0));
+	writel(val | (7 << 16), reg + SUN50I_H6_PLL_AUDIO_REG);
+
+	return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_h6_ccu_desc);
+}
+
+static const struct of_device_id sun50i_h6_ccu_ids[] = {
+	{ .compatible = "allwinner,sun50i-h6-ccu" },
+	{ }
+};
+
+static struct platform_driver sun50i_h6_ccu_driver = {
+	.probe	= sun50i_h6_ccu_probe,
+	.driver	= {
+		.name	= "sun50i-h6-ccu",
+		.of_match_table	= sun50i_h6_ccu_ids,
+	},
+};
+builtin_platform_driver(sun50i_h6_ccu_driver);
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.h b/drivers/clk/sunxi-ng/ccu-sun50i-h6.h
new file mode 100644
index 000000000000..ad6da4aa733c
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.h
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2016 Icenowy Zheng <icenowy at aosc.io>
+ */
+
+#ifndef _CCU_SUN50I_H6_H_
+#define _CCU_SUN50I_H6_H_
+
+#include <dt-bindings/clock/sun50i-h6-ccu.h>
+#include <dt-bindings/reset/sun50i-h6-ccu.h>
+
+#define CLK_OSC12M		0
+#define CLK_PLL_CPUX		1
+#define CLK_PLL_DDR0		2
+
+/* PLL_PERIPH0 exported for PRCM */
+
+#define CLK_PLL_PERIPH0_2X	4
+#define CLK_PLL_PERIPH0_4X	5
+#define CLK_PLL_PERIPH1		6
+#define CLK_PLL_PERIPH1_2X	7
+#define CLK_PLL_PERIPH1_4X	8
+#define CLK_PLL_GPU		9
+#define CLK_PLL_VIDEO0		10
+#define CLK_PLL_VIDEO0_4X	11
+#define CLK_PLL_VIDEO1		12
+#define CLK_PLL_VIDEO1_4X	13
+#define CLK_PLL_VE		14
+#define CLK_PLL_DE		15
+#define CLK_PLL_HSIC		16
+#define CLK_PLL_AUDIO_BASE	17
+#define CLK_PLL_AUDIO		18
+#define CLK_PLL_AUDIO_2X	19
+#define CLK_PLL_AUDIO_4X	20
+
+/* CPUX clock exported for DVFS */
+
+#define CLK_AXI			22
+#define CLK_CPUX_APB		23
+#define CLK_PSI_AHB1_AHB2	24
+#define CLK_AHB3		25
+
+/* APB1 clock exported for PIO */
+
+#define CLK_APB2		27
+#define CLK_MBUS		28
+
+/* All module clocks and bus gates are exported except DRAM */
+
+#define CLK_DRAM		52
+
+#define CLK_BUS_DRAM		60
+
+#define CLK_NUMBER		137
+
+#endif /* _CCU_SUN50I_H6_H_ */
diff --git a/include/dt-bindings/clock/sun50i-h6-ccu.h b/include/dt-bindings/clock/sun50i-h6-ccu.h
new file mode 100644
index 000000000000..6045735a2821
--- /dev/null
+++ b/include/dt-bindings/clock/sun50i-h6-ccu.h
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy at aosc.io>
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN50I_H6_H_
+#define _DT_BINDINGS_CLK_SUN50I_H6_H_
+
+#define CLK_PLL_PERIPH0		3
+
+#define CLK_CPUX		21
+
+#define CLK_APB1		26
+
+#define CLK_DE			29
+#define CLK_BUS_DE		30
+#define CLK_DEINTERLACE		31
+#define CLK_BUS_DEINTERLACE	32
+#define CLK_GPU			33
+#define CLK_BUS_GPU		34
+#define CLK_CE			35
+#define CLK_BUS_CE		36
+#define CLK_VE			37
+#define CLK_BUS_VE		38
+#define CLK_EMCE		39
+#define CLK_BUS_EMCE		40
+#define CLK_VP9			41
+#define CLK_BUS_VP9		42
+#define CLK_BUS_DMA		43
+#define CLK_BUS_MSGBOX		44
+#define CLK_BUS_SPINLOCK	45
+#define CLK_BUS_HSTIMER		46
+#define CLK_AVS			47
+#define CLK_BUS_DBG		48
+#define CLK_BUS_PSI		49
+#define CLK_BUS_PWM		50
+#define CLK_BUS_IOMMU		51
+
+#define CLK_MBUS_DMA		53
+#define CLK_MBUS_VE		54
+#define CLK_MBUS_CE		55
+#define CLK_MBUS_TS		56
+#define CLK_MBUS_NAND		57
+#define CLK_MBUS_CSI		58
+#define CLK_MBUS_DEINTERLACE	59
+
+#define CLK_NAND0		61
+#define CLK_NAND1		62
+#define CLK_BUS_NAND		63
+#define CLK_MMC0		64
+#define CLK_MMC1		65
+#define CLK_MMC2		66
+#define CLK_BUS_MMC0		67
+#define CLK_BUS_MMC1		68
+#define CLK_BUS_MMC2		69
+#define CLK_BUS_UART0		70
+#define CLK_BUS_UART1		71
+#define CLK_BUS_UART2		72
+#define CLK_BUS_UART3		73
+#define CLK_BUS_I2C0		74
+#define CLK_BUS_I2C1		75
+#define CLK_BUS_I2C2		76
+#define CLK_BUS_I2C3		77
+#define CLK_BUS_SCR0		78
+#define CLK_BUS_SCR1		79
+#define CLK_SPI0		80
+#define CLK_SPI1		81
+#define CLK_BUS_SPI0		82
+#define CLK_BUS_SPI1		83
+#define CLK_BUS_EMAC		84
+#define CLK_TS			85
+#define CLK_BUS_TS		86
+#define CLK_IR_TX		87
+#define CLK_BUS_IR_TX		88
+#define CLK_BUS_THS		89
+#define CLK_I2S3		90
+#define CLK_I2S0		91
+#define CLK_I2S1		92
+#define CLK_I2S2		93
+#define CLK_BUS_I2S0		94
+#define CLK_BUS_I2S1		95
+#define CLK_BUS_I2S2		96
+#define CLK_BUS_I2S3		97
+#define CLK_SPDIF		98
+#define CLK_BUS_SPDIF		99
+#define CLK_DMIC		100
+#define CLK_BUS_DMIC		101
+#define CLK_AUDIO_HUB		102
+#define CLK_BUS_AUDIO_HUB	103
+#define CLK_USB_OHCI0		104
+#define CLK_USB_PHY0		105
+#define CLK_USB_PHY1		106
+#define CLK_USB_OHCI3		107
+#define CLK_USB_PHY3		108
+#define CLK_USB_HSIC_12M	109
+#define CLK_USB_HSIC		110
+#define CLK_BUS_OHCI0		111
+#define CLK_BUS_OHCI3		112
+#define CLK_BUS_EHCI0		113
+#define CLK_BUS_XHCI		114
+#define CLK_BUS_EHCI3		115
+#define CLK_BUS_OTG		116
+#define CLK_PCIE_REF_100M	117
+#define CLK_PCIE_REF		118
+#define CLK_PCIE_REF_OUT	119
+#define CLK_PCIE_MAXI		120
+#define CLK_PCIE_AUX		121
+#define CLK_BUS_PCIE		122
+#define CLK_HDMI		123
+#define CLK_HDMI_CEC		124
+#define CLK_BUS_HDMI		125
+#define CLK_BUS_TCON_TOP	126
+#define CLK_TCON_LCD0		127
+#define CLK_BUS_TCON_LCD0	128
+#define CLK_TCON_TV0		129
+#define CLK_BUS_TCON_TV0	130
+#define CLK_CSI_CCI		131
+#define CLK_CSI_TOP		132
+#define CLK_CSI_MCLK		133
+#define CLK_BUS_CSI		134
+#define CLK_HDCP		135
+#define CLK_BUS_HDCP		136
+
+#endif /* _DT_BINDINGS_CLK_SUN50I_H6_H_ */
diff --git a/include/dt-bindings/reset/sun50i-h6-ccu.h b/include/dt-bindings/reset/sun50i-h6-ccu.h
new file mode 100644
index 000000000000..81106f455097
--- /dev/null
+++ b/include/dt-bindings/reset/sun50i-h6-ccu.h
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy at aosc.io>
+ */
+
+#ifndef _DT_BINDINGS_RESET_SUN50I_H6_H_
+#define _DT_BINDINGS_RESET_SUN50I_H6_H_
+
+#define RST_MBUS		0
+#define RST_BUS_DE		1
+#define RST_BUS_DEINTERLACE	2
+#define RST_BUS_GPU		3
+#define RST_BUS_CE		4
+#define RST_BUS_VE		5
+#define RST_BUS_EMCE		6
+#define RST_BUS_VP9		7
+#define RST_BUS_DMA		8
+#define RST_BUS_MSGBOX		9
+#define RST_BUS_SPINLOCK	10
+#define RST_BUS_HSTIMER		11
+#define RST_BUS_DBG		12
+#define RST_BUS_PSI		13
+#define RST_BUS_PWM		14
+#define RST_BUS_IOMMU		15
+#define RST_BUS_DRAM		16
+#define RST_BUS_NAND		17
+#define RST_BUS_MMC0		18
+#define RST_BUS_MMC1		19
+#define RST_BUS_MMC2		20
+#define RST_BUS_UART0		21
+#define RST_BUS_UART1		22
+#define RST_BUS_UART2		23
+#define RST_BUS_UART3		24
+#define RST_BUS_I2C0		25
+#define RST_BUS_I2C1		26
+#define RST_BUS_I2C2		27
+#define RST_BUS_I2C3		28
+#define RST_BUS_SCR0		29
+#define RST_BUS_SCR1		30
+#define RST_BUS_SPI0		31
+#define RST_BUS_SPI1		32
+#define RST_BUS_EMAC		33
+#define RST_BUS_TS		34
+#define RST_BUS_IR_TX		35
+#define RST_BUS_THS		36
+#define RST_BUS_I2S0		37
+#define RST_BUS_I2S1		38
+#define RST_BUS_I2S2		39
+#define RST_BUS_I2S3		40
+#define RST_BUS_SPDIF		41
+#define RST_BUS_DMIC		42
+#define RST_BUS_AUDIO_HUB	43
+#define RST_USB_PHY0		44
+#define RST_USB_PHY1		45
+#define RST_USB_PHY3		46
+#define RST_USB_HSIC		47
+#define RST_BUS_OHCI0		48
+#define RST_BUS_OHCI3		49
+#define RST_BUS_EHCI0		50
+#define RST_BUS_XHCI		51
+#define RST_BUS_EHCI3		52
+#define RST_BUS_OTG		53
+#define RST_BUS_PCIE		54
+#define RST_PCIE_POWERUP	55
+#define RST_BUS_HDMI		56
+#define RST_BUS_HDMI_SUB	57
+#define RST_BUS_TCON_TOP	58
+#define RST_BUS_TCON_LCD0	59
+#define RST_BUS_TCON_TV0	60
+#define RST_BUS_CSI		61
+#define RST_BUS_HDCP		62
+
+#endif /* _DT_BINDINGS_RESET_SUN50I_H6_H_ */
-- 
2.15.1




More information about the linux-arm-kernel mailing list