[PATCH v2 19/19] ARM64: dts: r8a77965: Add EtherAVB device node

[Simon Horman]

On Wed, Feb 21, 2018 at 09:53:58PM +0300, Sergei Shtylyov wrote:
> On 02/21/2018 09:23 PM, Simon Horman wrote:
> 
> > ...
> > 
> >>>>>>>> +			clocks = <&cpg CPG_MOD 812>;
> >>>>>>>> +			power-domains = <&sysc 32>;
> >>>>>>>> +			resets = <&cpg 812>;
> >>>>>>>> +			phy-mode = "rgmii-txid";
> >>>>>>>
> >>>>>>>    Why not just "rgmii"? TX delay is a board specific detail, no?
> >>>>>>>
> >>>>>> I admit I took this one straight from r8a7796 dtsi.
> >>>>>> Would you like to me resend and change this?
> >>>>>
> >>>>>    Yes, unless Simon would fix it while merging...
> >>>>
> >>>> Can I confirm the desired change is s/rgmii-txid/rgmii/ ?
> >>>
> >>>    Yes.
> >>
> >>    Apparently that means that this prop should be overridden in the board file
> >> (which may not be an easy task given the board is Salvator-XS again).
> >>
> >> [...]
> > 
> > Can we override it in r8a77965-salvator-x.dts or r8a77965-salvator-xs.dts?
> 
>    In salvator-common.dtsi most probably -- it has the PHY data for Ether AVB.
> 
> > I feel that I'm missing an important point here.
> 
>    Well, r8a779{5|6}.dtsi also have phy-mode = "rgmii-txid" (which was
>    unjustified in my current understanding). Thus such board override
>    wouldn't hurt them. But we lack a patch modifying salvator-common.dtsi
>    in htis series, so I'm now thinking a respin of this series is needed
>    anyway... sorry for being unclear. :-)

While I've applied other patches in this series I have
not applied this one - mainly to allow this discussion to conclude.

Is an appropriate solution to do the following?

1) Atomically update
   a) r8a779{5|6}.dtsi to use "rgmii" and
   b) salvator-common.dtsi to use "rgmii-txid"
2) Update this patch to use "rgmii"

Sorry if I'm still missing the point.