[PATCH 10/10] arm64: tegra: Add PWM controller on Tegra186 soc
Rajkumar Rampelli
rrajk at nvidia.com
Tue Feb 20 22:58:59 PST 2018
The NVIDIA Tegra186 SoC has a PWM controller which is
used in FAN control use case.
Signed-off-by: Rajkumar Rampelli <rrajk at nvidia.com>
---
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 37149e9..c6f154e 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -1032,6 +1032,17 @@
interrupt-parent = <&gic>;
};
+ pwm at c340000 {
+ compatible = "nvidia,tegra186-pwm";
+ reg = <0x0 0xc340000 0x0 0x10000>;
+ clocks = <&bpmp TEGRA186_CLK_PWM4>;
+ clock-names = "pwm";
+ #pwm-cells = <2>;
+ resets = <&bpmp TEGRA186_RESET_PWM4>;
+ reset-names = "pwm";
+ status = "disabled";
+ };
+
tegra_tachometer: tachometer at 39c0000 {
compatible = "nvidia,tegra186-pwm-tachometer";
reg = <0x0 0x039c0000 0x0 0x10>;
--
2.1.4
More information about the linux-arm-kernel
mailing list