[PATCH v5 5/5] ARM: dts: bcm2837-rpi-3-b: add GPIO expander

[Baruch Siach]

Add a description of the RPi3 GPIO expander that the VC4 firmware controls.

Acked-by: Stefan Wahren <stefan.wahren at i2se.com>
Signed-off-by: Baruch Siach <baruch at tkos.co.il>
---
v5:
  * Drop the 'firmware' property

v4:
  * Move the gpio node under the firmware node
  * Rename the gpio node to plain 'gpio'
  * Add Stefan's ack

v3:
  * List GPIO names one per line.

v2:
  * Move GPIO expander node out of the soc container
  * Rename compatible string
  * Add gpio-line-names property
---
 arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index 3e4ed7c5b0b3..0b31d995a066 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -25,6 +25,23 @@
 	};
 };
 
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "BT_ON",
+				  "WL_ON",
+				  "STATUS_LED",
+				  "LAN_RUN",
+				  "HPD_N",
+				  "CAM_GPIO0",
+				  "CAM_GPIO1",
+				  "PWR_LOW_N";
+		status = "okay";
+	};
+};
+
 /* uart0 communicates with the BT module */
 &uart0 {
 	pinctrl-names = "default";
-- 
2.16.1