[PATCH v5 1/5] ARM: bcm2835: sync firmware properties with downstream
Baruch Siach
baruch at tkos.co.il
Tue Feb 20 04:19:31 PST 2018
Add latest firmware property tags from the latest Raspberry Pi downstream
kernel. This is needed for the GPIO tags, so we can control the GPIO
multiplexor lines.
Acked-by: Stefan Wahren <stefan.wahren at i2se.com>
Signed-off-by: Baruch Siach <baruch at tkos.co.il>
---
v4: No change
v3: Add Stefan's ack
v2: No change
---
include/soc/bcm2835/raspberrypi-firmware.h | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h
index cb979ad90401..50df5b28d2c9 100644
--- a/include/soc/bcm2835/raspberrypi-firmware.h
+++ b/include/soc/bcm2835/raspberrypi-firmware.h
@@ -63,6 +63,7 @@ enum rpi_firmware_property_tag {
RPI_FIRMWARE_GET_MIN_VOLTAGE = 0x00030008,
RPI_FIRMWARE_GET_TURBO = 0x00030009,
RPI_FIRMWARE_GET_MAX_TEMPERATURE = 0x0003000a,
+ RPI_FIRMWARE_GET_STC = 0x0003000b,
RPI_FIRMWARE_ALLOCATE_MEMORY = 0x0003000c,
RPI_FIRMWARE_LOCK_MEMORY = 0x0003000d,
RPI_FIRMWARE_UNLOCK_MEMORY = 0x0003000e,
@@ -72,12 +73,22 @@ enum rpi_firmware_property_tag {
RPI_FIRMWARE_SET_ENABLE_QPU = 0x00030012,
RPI_FIRMWARE_GET_DISPMANX_RESOURCE_MEM_HANDLE = 0x00030014,
RPI_FIRMWARE_GET_EDID_BLOCK = 0x00030020,
+ RPI_FIRMWARE_GET_CUSTOMER_OTP = 0x00030021,
RPI_FIRMWARE_GET_DOMAIN_STATE = 0x00030030,
RPI_FIRMWARE_SET_CLOCK_STATE = 0x00038001,
RPI_FIRMWARE_SET_CLOCK_RATE = 0x00038002,
RPI_FIRMWARE_SET_VOLTAGE = 0x00038003,
RPI_FIRMWARE_SET_TURBO = 0x00038009,
+ RPI_FIRMWARE_SET_CUSTOMER_OTP = 0x00038021,
RPI_FIRMWARE_SET_DOMAIN_STATE = 0x00038030,
+ RPI_FIRMWARE_GET_GPIO_STATE = 0x00030041,
+ RPI_FIRMWARE_SET_GPIO_STATE = 0x00038041,
+ RPI_FIRMWARE_SET_SDHOST_CLOCK = 0x00038042,
+ RPI_FIRMWARE_GET_GPIO_CONFIG = 0x00030043,
+ RPI_FIRMWARE_SET_GPIO_CONFIG = 0x00038043,
+ RPI_FIRMWARE_GET_PERIPH_REG = 0x00030045,
+ RPI_FIRMWARE_SET_PERIPH_REG = 0x00038045,
+
/* Dispmanx TAGS */
RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE = 0x00040001,
@@ -91,6 +102,8 @@ enum rpi_firmware_property_tag {
RPI_FIRMWARE_FRAMEBUFFER_GET_VIRTUAL_OFFSET = 0x00040009,
RPI_FIRMWARE_FRAMEBUFFER_GET_OVERSCAN = 0x0004000a,
RPI_FIRMWARE_FRAMEBUFFER_GET_PALETTE = 0x0004000b,
+ RPI_FIRMWARE_FRAMEBUFFER_GET_TOUCHBUF = 0x0004000f,
+ RPI_FIRMWARE_FRAMEBUFFER_GET_GPIOVIRTBUF = 0x00040010,
RPI_FIRMWARE_FRAMEBUFFER_RELEASE = 0x00048001,
RPI_FIRMWARE_FRAMEBUFFER_TEST_PHYSICAL_WIDTH_HEIGHT = 0x00044003,
RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_WIDTH_HEIGHT = 0x00044004,
@@ -100,6 +113,7 @@ enum rpi_firmware_property_tag {
RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_OFFSET = 0x00044009,
RPI_FIRMWARE_FRAMEBUFFER_TEST_OVERSCAN = 0x0004400a,
RPI_FIRMWARE_FRAMEBUFFER_TEST_PALETTE = 0x0004400b,
+ RPI_FIRMWARE_FRAMEBUFFER_TEST_VSYNC = 0x0004400e,
RPI_FIRMWARE_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT = 0x00048003,
RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT = 0x00048004,
RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH = 0x00048005,
@@ -108,6 +122,10 @@ enum rpi_firmware_property_tag {
RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET = 0x00048009,
RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a,
RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE = 0x0004800b,
+ RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF = 0x0004801f,
+ RPI_FIRMWARE_FRAMEBUFFER_SET_GPIOVIRTBUF = 0x00048020,
+ RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC = 0x0004800e,
+ RPI_FIRMWARE_FRAMEBUFFER_SET_BACKLIGHT = 0x0004800f,
RPI_FIRMWARE_VCHIQ_INIT = 0x00048010,
--
2.16.1
More information about the linux-arm-kernel
mailing list