[PATCH 1/6] nand: davinci: rename the platform driver

[Bartosz Golaszewski]

2018-02-16 20:22 GMT+01:00 David Lechner <david at lechnology.com>:
> On 02/16/2018 01:19 PM, Boris Brezillon wrote:
>>
>> On Fri, 16 Feb 2018 17:47:07 +0100
>> Bartosz Golaszewski <brgl at bgdev.pl> wrote:
>>
>>> From: Bartosz Golaszewski <bgolaszewski at baylibre.com>
>>>
>>> Commit d8e22fb4ccac ("ARM: da850: add the nand dev_id to the clock
>>> lookup table") broke the nand support in board file mode for
>>> da850-based boards. Instead of reverting it and breaking the DT users
>>> in the process (due to clock lookup), rename the driver to match the
>>> clock table before renaming the users.
>>>
>>> Fixes: d8e22fb4ccac ("ARM: da850: add the nand dev_id to the clock lookup
>>> table")
>>> Signed-off-by: Bartosz Golaszewski <bgolaszewski at baylibre.com>
>>> ---
>>>   drivers/mtd/nand/davinci_nand.c | 2 +-
>>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/mtd/nand/davinci_nand.c
>>> b/drivers/mtd/nand/davinci_nand.c
>>> index ccc8c43abcff..4fb143bf1872 100644
>>> --- a/drivers/mtd/nand/davinci_nand.c
>>> +++ b/drivers/mtd/nand/davinci_nand.c
>>> @@ -865,7 +865,7 @@ static struct platform_driver nand_davinci_driver = {
>>>         .probe          = nand_davinci_probe,
>>>         .remove         = nand_davinci_remove,
>>>         .driver         = {
>>> -               .name   = "davinci_nand",
>>> +               .name   = "davinci-nand",
>>
>>
>> Another side-effect of this change you should be aware of: by doing
>> that you also break all users that were defining partitions through the
>> cmdline using mtdparts=davinci_nand.0:<part-layout>.
>>
>> Not sure this is a good idea ;-).
>
>
> Also, once we move to the common clock framework, the AUXDATA that causes
> the DT clock lookup breakage you are trying to avoid will go away, so that
> won't be a reason for changing this either.
>
>

Ok, let's wait for v7 of your series then and reiterate this one.

Best regards,
Bartosz Golaszewski