[PATCH v2 1/3] ARM: dts: stm32: add USB OTG HS support for STM32H743 SoC

Amelie Delaunay amelie.delaunay at st.com
Mon Feb 19 00:46:26 PST 2018


This patch adds support for USB OTG HS on STM32H743 SoC.
USB OTG HS controller is the same than the one used on STM32F7 SoCs.

Signed-off-by: Amelie Delaunay <amelie.delaunay at st.com>
---
 arch/arm/boot/dts/stm32h743.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 38d7cb8..0f6c078 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -217,6 +217,18 @@
 			};
 		};
 
+		usbotg_hs: usb at 40040000 {
+			compatible = "st,stm32f7-hsotg";
+			reg = <0x40040000 0x40000>;
+			interrupts = <77>;
+			clocks = <&rcc USB1OTG_CK>;
+			clock-names = "otg";
+			g-rx-fifo-size = <256>;
+			g-np-tx-fifo-size = <32>;
+			g-tx-fifo-size = <128 128 64 64 64 64 32 32>;
+			status = "disabled";
+		};
+
 		mdma1: dma at 52000000 {
 			compatible = "st,stm32h7-mdma";
 			reg = <0x52000000 0x1000>;
-- 
2.7.4




More information about the linux-arm-kernel mailing list