[PATCH v3] rtc: ac100: Fix ac100 determine rate bug
Chen-Yu Tsai
wens at csie.org
Fri Feb 16 04:59:17 PST 2018
On Fri, Feb 16, 2018 at 8:49 PM, Philipp Rossak <embed3d at gmail.com> wrote:
>
>
> On 16.02.2018 05:10, Chen-Yu Tsai wrote:
>>
>> On Fri, Feb 16, 2018 at 1:53 AM, Philipp Rossak <embed3d at gmail.com> wrote:
>>>
>>>
>>>
>>> On 15.02.2018 15:11, Maxime Ripard wrote:
>>>>
>>>>
>>>> On Wed, Feb 14, 2018 at 02:56:12PM +0100, Philipp Rossak wrote:
>>>>>
>>>>>
>>>>> This patch fixes a bug, that prevents the Allwinner A83T and the A80
>>>>> from a successful boot.
>>>>>
>>>>> The bug is there since v4.16-rc1 and appeared after the clk branch was
>>>>> merged.
>>>>
>>>>
>>>>
>>>> Out of curiosity, which patch has introduced this? I couldn't find any
>>>> obvious match.
>>>>
>>>
>>> I wasn't also n
>>
>>
>> To be honest, I'm not sure why this is hitting you and not me.
>> I have both A83T boards that have assigned-clock-rates set for
>> the ac100 clock outputs for WiFi. I have them running 4.16-rc1
>> and have not seen this. The device tree patches that add these
>> are in 4.15.
>>
>
> Now it is getting curious ... .
> I already mentioned that bug in the sunxi-irc and someone else was hitting
> that problem also...
> I tested it also with the same toolchain you are using (gcc 7.3.0-1 Debian),
> but that didn't made any difference.
>
> I don't think that issue is related with the Hardware, but to be on the save
> side: Which Hardware version of the BPI-M3 do you have? I have version 1.2.
>
> Can someone else can confirm this bug?
So I might have remembered wrong, as I just realized I have your
patch in my a83t branches. I don't hit this on the A80, which also
has the AC100, but doesn't use assigned-clock-rates in the device
tree.
Could you try rolling back to 4.15 and see if you still hit it?
>
>
>>>
>>>>> You can find the shortend trace below:
>>>>>
>>>>> Unable to handle kernel NULL pointer dereference at virtual address
>>>>> 00000000
>>>>> pgd = (ptrval)
>>>>> [00000000] *pgd=00000000
>>>>> Internal error: Oops: 5 [#1] SMP ARM
>>>>> Modules linked in:
>>>>> CPU: 0 PID: 49 Comm: kworker/0:1 Not tainted 4.15.0-10190-gb89e32ccd1be
>>>>> #2
>>>>> Hardware name: Allwinner sun8i Family
>>>>> Workqueue: events deferred_probe_work_func
>>>>> PC is at clk_hw_get_rate+0x0/0x34
>>>>> LR is at ac100_clkout_determine_rate+0x48/0x19c
>>>>>
>>>>> [ ... ]
>>>>>
>>>>> (clk_hw_get_rate) from (ac100_clkout_determine_rate+0x48/0x19c)
>>>>> (ac100_clkout_determine_rate) from
>>>>> (clk_core_set_rate_nolock+0x3c/0x1a0)
>>>>> (clk_core_set_rate_nolock) from (clk_set_rate+0x30/0x88)
>>>>> (clk_set_rate) from (of_clk_set_defaults+0x200/0x364)
>>>>> (of_clk_set_defaults) from (platform_drv_probe+0x18/0xb0)
>>>>>
>>>>> To fix that bug, we first check if the return of the
>>>>> clk_hw_get_parent_by_index is non zero. If it is zero we skip that
>>>>> clock parent.
>>>>>
>>>>> The BUG report could be found here: https://lkml.org/lkml/2018/2/10/198
>>>>>
>>>>> Fixes: 04940631b8d2 ("rtc: ac100: Add clk output support")
>>>>>
>>>>> Signed-off-by: Philipp Rossak <embed3d at gmail.com>
>>>>> ---
>>>>>
>>>>> Changes in v3:
>>>>> * add information when the bug appeared
>>>>> * make the comment more clear
>>>>> Changes in v2:
>>>>> * add tag Fixes: ... to commit message
>>>>> * add comment to if statement why we are doing this check
>>>>>
>>>>> drivers/rtc/rtc-ac100.c | 19 ++++++++++++++++++-
>>>>> 1 file changed, 18 insertions(+), 1 deletion(-)
>>>>>
>>>>> diff --git a/drivers/rtc/rtc-ac100.c b/drivers/rtc/rtc-ac100.c
>>>>> index 8ff9dc3fe5bf..2412aa2e8399 100644
>>>>> --- a/drivers/rtc/rtc-ac100.c
>>>>> +++ b/drivers/rtc/rtc-ac100.c
>>>>> @@ -183,7 +183,24 @@ static int ac100_clkout_determine_rate(struct
>>>>> clk_hw
>>>>> *hw,
>>>>> for (i = 0; i < num_parents; i++) {
>>>>> struct clk_hw *parent = clk_hw_get_parent_by_index(hw,
>>>>> i);
>>>>> - unsigned long tmp, prate = clk_hw_get_rate(parent);
>>>>> + unsigned long tmp, prate;
>>>>> +
>>>>> + /*
>>>>> + * The clock has two parents, one is a fixed clock
>>>>> which
>>>>> is
>>>>> + * internally registered by the ac100 driver. The other
>>>>> parent
>>>>> + * is a clock from the codec side of the chip, which we
>>>>> + * properly declare and reference in the devicetree and
>>>>> is
>>>>> + * not implemented in any driver right now.
>>>>> + * If the clock core looks for the parent of that
>>>>> second
>>>>> + * missing clock, it can't one that is registered and
>>>>> + * returns NULL.
>>>>> + * Thus we need to check if the parent exists before
>>>>> + * we get the parent rate.
>>>>> + */
>>>>> + if (!parent)
>>>>> + continue;
>>>>
>>>>
>>>>
>>>> I'm sorry, but I still don't get it. When you register that clock, you
>>>> will give it two parents. Why would that change during the life of the
>>>> clock?
>>>>
>>>> This really looks like a workaround rather than an actual fix.
>>>>
>>>> Maxime
>>>>
>>> I agree this is more a workaround!
>>> A proper solution/fix would be to define the devicetree correct like
>>> this:
>>>
>>> diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
>>> b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
>>> index 6550bf0e594b..6f56d429f17e 100644
>>> --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
>>> +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
>>> @@ -175,11 +175,18 @@
>>> compatible = "x-powers,ac100-rtc";
>>> interrupt-parent = <&r_intc>;
>>> interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
>>> - clocks = <&ac100_codec>;
>>> + clocks = <&ac100_rtc_32k>;
>>> #clock-cells = <1>;
>>> clock-output-names = "cko1_rtc",
>>> "cko2_rtc",
>>> "cko3_rtc";
>>> +
>>> + ac100_rtc_32k: rtc-32k-oscillator {
>>> + compatible = "fixed-clock";
>>> + #clock-cells = <0>;
>>> + clock-frequency = <32768>;
>>> + clock-output-names = "ac100-rtc-32k";
>>> + };
>>> };
>>> };
>>> };
>>>
>>> What do you think about that solution?
>>
>>
>> That's not quite right either. As I mentioned before, the
>> RTC block has two clock inputs, one 4MHz signal from the
>> codec block, and one 32.768 kHz signal from an external
>> crystal. The original device tree binding describes the
>> first one, and the 32.768 kHz clock was registered by
>> the RTC driver internally.
>>
>> If you're going to add the crystal clock, you still need
>> to keep the codec one. Note that this does not fix what
>> Maxime is asking you. I've already provided an explanation:
>>
>> The clock core allows registering clocks with not-yet-existing
>> clock parents. Parents are matches by string names. If no
>> clock by that name is registered yet, the clock core simply
>> orphans the new clock if the unregistered parent is its
>> current parent or simply ignores that parent if its not the
>> current parent. This is entirely valid and is what we are
>> counting on here, as we haven't implemented the codec-side
>> driver.
>>
>> Note we also sort of depend on this behavior for sunxi-ng
>> clocks, where in some cases we get circular dependencies
>> between clock blocks.
>>
>> BTW, since this is mostly related to the clk subsystem,
>> please CC the clk maintainers as well.
>>
>
> Ok, I added also now the clk mailing list and maintainers.
> As reference this here is the boot log [1].
>
> Im not sure if this in relation to this bug:
> But, already with the 4.15 kernel I get from time to time some oops during
> runtime on the a31s (bpi-m2) and all are clock related and causes a crash of
> the system.
Are you referring to the A31 CLK_OUT bug? That is an entirely separate
bug in the A31/A31s CCU driver. The bug was there from the beginning,
but did not cause a crash as the incompatible data structures had lined
up in a way that the embedded data structure that was used by the incorrect
clk ops was actually compatible. This changed with 4.16-rc1, as a new field
was added to some of the clock types, breaking the alignment. I made some
changes but have yet to write the commit log for it. Also I don't have any
A31/A31s boards to test it on right now. I can send you the patch later.
ChenYu
>
> Philipp
>
>
>
> [1]: https://pastebin.com/5c7hxjsS
More information about the linux-arm-kernel
mailing list