[PATCH 7/8] arm64: dts: renesas: r8a77995-draak: Add HDMI Out through ADV7511

[Simon Horman]

On Thu, Feb 15, 2018 at 04:16:00PM +0200, Laurent Pinchart wrote:
> Hi Kieran,
> 
> Thank you for the patch.
> 
> On Thursday, 15 February 2018 10:38:22 EET Kieran Bingham wrote:
> > From: Kieran Bingham <kieran.bingham at ideasonboard.com>
> > 
> > Provide a device node for the ADV7511 as found on the Draak D3 platform.
> > 
> > The ADV7511 is connected to the DU through a parallel mux chip, and is
> > configurable in hardware whether it is connected to LVDS0 or LVDS1.
> > 
> > Connect through to LVDS0 as a default implementation.
> 
> You need to model the LVDS decoder in DT too. I know that no driver and no DT 
> bindings are available at the moment, and I'm aware that this patch enables 
> the HDMI output on the Draak board, but I don't think it's upstreamable as-is.

Thanks, I've marked this as "Changes Requested".