[PATCH v5 10/12] drm/sun4i: Implement A83T HDMI driver
Jernej Skrabec
jernej.skrabec at siol.net
Wed Feb 14 12:09:04 PST 2018
A83T has DW HDMI IP block with a custom PHY similar to Synopsys gen2
HDMI PHY.
Only video output was tested, while HW also supports audio and CEC.
Support for them will be added later.
Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
---
drivers/gpu/drm/sun4i/Kconfig | 9 ++
drivers/gpu/drm/sun4i/Makefile | 4 +
drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c | 196 ++++++++++++++++++++++++
drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 44 ++++++
drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 270 +++++++++++++++++++++++++++++++++
5 files changed, 523 insertions(+)
create mode 100644 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
create mode 100644 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
create mode 100644 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
diff --git a/drivers/gpu/drm/sun4i/Kconfig b/drivers/gpu/drm/sun4i/Kconfig
index 882d85db9053..7327da3bc94f 100644
--- a/drivers/gpu/drm/sun4i/Kconfig
+++ b/drivers/gpu/drm/sun4i/Kconfig
@@ -40,6 +40,15 @@ config DRM_SUN4I_BACKEND
do some alpha blending and feed graphics to TCON. If M is
selected the module will be called sun4i-backend.
+config DRM_SUN8I_DW_HDMI
+ tristate "Support for Allwinner version of DesignWare HDMI"
+ depends on DRM_SUN4I
+ select DRM_DW_HDMI
+ help
+ Choose this option if you have an Allwinner SoC with the
+ DesignWare HDMI controller with custom HDMI PHY. If M is
+ selected the module will be called sun8i_dw_hdmi.
+
config DRM_SUN8I_MIXER
tristate "Support for Allwinner Display Engine 2.0 Mixer"
default MACH_SUN8I
diff --git a/drivers/gpu/drm/sun4i/Makefile b/drivers/gpu/drm/sun4i/Makefile
index 2b37a6abbb1d..a7c47d9aa64d 100644
--- a/drivers/gpu/drm/sun4i/Makefile
+++ b/drivers/gpu/drm/sun4i/Makefile
@@ -9,6 +9,9 @@ sun4i-drm-hdmi-y += sun4i_hdmi_enc.o
sun4i-drm-hdmi-y += sun4i_hdmi_i2c.o
sun4i-drm-hdmi-y += sun4i_hdmi_tmds_clk.o
+sun8i-drm-hdmi-y += sun8i_dw_hdmi.o
+sun8i-drm-hdmi-y += sun8i_hdmi_phy.o
+
sun8i-mixer-y += sun8i_mixer.o sun8i_ui_layer.o \
sun8i_vi_layer.o sun8i_ui_scaler.o \
sun8i_vi_scaler.o sun8i_csc.o
@@ -26,4 +29,5 @@ obj-$(CONFIG_DRM_SUN4I) += sun6i_drc.o
obj-$(CONFIG_DRM_SUN4I_BACKEND) += sun4i-backend.o
obj-$(CONFIG_DRM_SUN4I_HDMI) += sun4i-drm-hdmi.o
+obj-$(CONFIG_DRM_SUN8I_DW_HDMI) += sun8i-drm-hdmi.o
obj-$(CONFIG_DRM_SUN8I_MIXER) += sun8i-mixer.o
diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
new file mode 100644
index 000000000000..9f40a44b456b
--- /dev/null
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2018 Jernej Skrabec <jernej.skrabec at siol.net>
+ */
+
+#include <linux/component.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <drm/drm_of.h>
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+
+#include "sun8i_dw_hdmi.h"
+
+static void sun8i_dw_hdmi_encoder_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adj_mode)
+{
+ struct sun8i_dw_hdmi *hdmi = encoder_to_sun8i_dw_hdmi(encoder);
+
+ clk_set_rate(hdmi->clk_tmds, mode->crtc_clock * 1000);
+}
+
+static const struct drm_encoder_helper_funcs
+sun8i_dw_hdmi_encoder_helper_funcs = {
+ .mode_set = sun8i_dw_hdmi_encoder_mode_set,
+};
+
+static const struct drm_encoder_funcs sun8i_dw_hdmi_encoder_funcs = {
+ .destroy = drm_encoder_cleanup,
+};
+
+static enum drm_mode_status
+sun8i_dw_hdmi_mode_valid(struct drm_connector *connector,
+ const struct drm_display_mode *mode)
+{
+ if (mode->clock > 297000)
+ return MODE_CLOCK_HIGH;
+
+ return MODE_OK;
+}
+
+static int sun8i_dw_hdmi_bind(struct device *dev, struct device *master,
+ void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct dw_hdmi_plat_data *plat_data;
+ struct drm_device *drm = data;
+ struct device_node *phy_node;
+ struct drm_encoder *encoder;
+ struct sun8i_dw_hdmi *hdmi;
+ int ret;
+
+ if (!pdev->dev.of_node)
+ return -ENODEV;
+
+ hdmi = devm_kzalloc(&pdev->dev, sizeof(*hdmi), GFP_KERNEL);
+ if (!hdmi)
+ return -ENOMEM;
+
+ plat_data = &hdmi->plat_data;
+ hdmi->dev = &pdev->dev;
+ encoder = &hdmi->encoder;
+
+ encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
+ /*
+ * If we failed to find the CRTC(s) which this encoder is
+ * supposed to be connected to, it's because the CRTC has
+ * not been registered yet. Defer probing, and hope that
+ * the required CRTC is added later.
+ */
+ if (encoder->possible_crtcs == 0)
+ return -EPROBE_DEFER;
+
+ hdmi->rst_ctrl = devm_reset_control_get(dev, "ctrl");
+ if (IS_ERR(hdmi->rst_ctrl)) {
+ dev_err(dev, "Could not get ctrl reset control\n");
+ return PTR_ERR(hdmi->rst_ctrl);
+ }
+
+ hdmi->clk_tmds = devm_clk_get(dev, "tmds");
+ if (IS_ERR(hdmi->clk_tmds)) {
+ dev_err(dev, "Couldn't get the tmds clock\n");
+ return PTR_ERR(hdmi->clk_tmds);
+ }
+
+ ret = reset_control_deassert(hdmi->rst_ctrl);
+ if (ret) {
+ dev_err(dev, "Could not deassert ctrl reset control\n");
+ return ret;
+ }
+
+ ret = clk_prepare_enable(hdmi->clk_tmds);
+ if (ret) {
+ dev_err(dev, "Could not enable tmds clock\n");
+ goto err_assert_ctrl_reset;
+ }
+
+ phy_node = of_parse_phandle(dev->of_node, "phys", 0);
+ if (!phy_node) {
+ dev_err(dev, "Can't found PHY phandle\n");
+ goto err_disable_clk_tmds;
+ }
+
+ ret = sun8i_hdmi_phy_probe(hdmi, phy_node);
+ of_node_put(phy_node);
+ if (ret) {
+ dev_err(dev, "Couldn't get the HDMI PHY\n");
+ goto err_disable_clk_tmds;
+ }
+
+ drm_encoder_helper_add(encoder, &sun8i_dw_hdmi_encoder_helper_funcs);
+ drm_encoder_init(drm, encoder, &sun8i_dw_hdmi_encoder_funcs,
+ DRM_MODE_ENCODER_TMDS, NULL);
+
+ sun8i_hdmi_phy_init(hdmi->phy);
+
+ plat_data->mode_valid = &sun8i_dw_hdmi_mode_valid;
+ plat_data->phy_ops = sun8i_hdmi_phy_get_ops();
+ plat_data->phy_name = "sun8i_dw_hdmi_phy";
+ plat_data->phy_data = hdmi->phy;
+
+ platform_set_drvdata(pdev, hdmi);
+
+ hdmi->hdmi = dw_hdmi_bind(pdev, encoder, plat_data);
+
+ /*
+ * If dw_hdmi_bind() fails we'll never call dw_hdmi_unbind(),
+ * which would have called the encoder cleanup. Do it manually.
+ */
+ if (IS_ERR(hdmi->hdmi)) {
+ ret = PTR_ERR(hdmi->hdmi);
+ goto cleanup_encoder;
+ }
+
+ return 0;
+
+cleanup_encoder:
+ drm_encoder_cleanup(encoder);
+ sun8i_hdmi_phy_remove(hdmi);
+err_disable_clk_tmds:
+ clk_disable_unprepare(hdmi->clk_tmds);
+err_assert_ctrl_reset:
+ reset_control_assert(hdmi->rst_ctrl);
+
+ return ret;
+}
+
+static void sun8i_dw_hdmi_unbind(struct device *dev, struct device *master,
+ void *data)
+{
+ struct sun8i_dw_hdmi *hdmi = dev_get_drvdata(dev);
+
+ dw_hdmi_unbind(hdmi->hdmi);
+ sun8i_hdmi_phy_remove(hdmi);
+ clk_disable_unprepare(hdmi->clk_tmds);
+ reset_control_assert(hdmi->rst_ctrl);
+}
+
+static const struct component_ops sun8i_dw_hdmi_ops = {
+ .bind = sun8i_dw_hdmi_bind,
+ .unbind = sun8i_dw_hdmi_unbind,
+};
+
+static int sun8i_dw_hdmi_probe(struct platform_device *pdev)
+{
+ return component_add(&pdev->dev, &sun8i_dw_hdmi_ops);
+}
+
+static int sun8i_dw_hdmi_remove(struct platform_device *pdev)
+{
+ component_del(&pdev->dev, &sun8i_dw_hdmi_ops);
+
+ return 0;
+}
+
+static const struct of_device_id sun8i_dw_hdmi_dt_ids[] = {
+ { .compatible = "allwinner,sun8i-a83t-dw-hdmi" },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, sun8i_dw_hdmi_dt_ids);
+
+struct platform_driver sun8i_dw_hdmi_pltfm_driver = {
+ .probe = sun8i_dw_hdmi_probe,
+ .remove = sun8i_dw_hdmi_remove,
+ .driver = {
+ .name = "sun8i-dw-hdmi",
+ .of_match_table = sun8i_dw_hdmi_dt_ids,
+ },
+};
+module_platform_driver(sun8i_dw_hdmi_pltfm_driver);
+
+MODULE_AUTHOR("Jernej Skrabec <jernej.skrabec at siol.net>");
+MODULE_DESCRIPTION("Allwinner DW HDMI bridge");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
new file mode 100644
index 000000000000..f380f2b59cae
--- /dev/null
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jernej Skrabec <jernej.skrabec at siol.net>
+ */
+
+#ifndef _SUN8I_DW_HDMI_H_
+#define _SUN8I_DW_HDMI_H_
+
+#include <drm/bridge/dw_hdmi.h>
+#include <drm/drm_encoder.h>
+#include <linux/clk.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+struct sun8i_hdmi_phy {
+ struct clk *clk_bus;
+ struct clk *clk_mod;
+ struct regmap *regs;
+ struct reset_control *rst_phy;
+};
+
+struct sun8i_dw_hdmi {
+ struct clk *clk_tmds;
+ struct device *dev;
+ struct dw_hdmi *hdmi;
+ struct drm_encoder encoder;
+ struct sun8i_hdmi_phy *phy;
+ struct dw_hdmi_plat_data plat_data;
+ struct reset_control *rst_ctrl;
+};
+
+static inline struct sun8i_dw_hdmi *
+encoder_to_sun8i_dw_hdmi(struct drm_encoder *encoder)
+{
+ return container_of(encoder, struct sun8i_dw_hdmi, encoder);
+}
+
+int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node);
+void sun8i_hdmi_phy_remove(struct sun8i_dw_hdmi *hdmi);
+
+void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy);
+const struct dw_hdmi_phy_ops *sun8i_hdmi_phy_get_ops(void);
+
+#endif /* _SUN8I_DW_HDMI_H_ */
diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
new file mode 100644
index 000000000000..e5bfcdd43ec9
--- /dev/null
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2018 Jernej Skrabec <jernej.skrabec at siol.net>
+ */
+
+#include <linux/of_address.h>
+
+#include "sun8i_dw_hdmi.h"
+
+#define SUN8I_HDMI_PHY_DBG_CTRL_REG 0x0000
+#define SUN8I_HDMI_PHY_DBG_CTRL_PX_LOCK BIT(0)
+#define SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK GENMASK(15, 8)
+#define SUN8I_HDMI_PHY_DBG_CTRL_POL(val) (val << 8)
+#define SUN8I_HDMI_PHY_DBG_CTRL_ADDR_MASK GENMASK(23, 16)
+#define SUN8I_HDMI_PHY_DBG_CTRL_ADDR(addr) (addr << 16)
+
+#define SUN8I_HDMI_PHY_REXT_CTRL_REG 0x0004
+#define SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN BIT(31)
+
+#define SUN8I_HDMI_PHY_READ_EN_REG 0x0010
+#define SUN8I_HDMI_PHY_READ_EN_MAGIC 0x54524545
+
+#define SUN8I_HDMI_PHY_UNSCRAMBLE_REG 0x0014
+#define SUN8I_HDMI_PHY_UNSCRAMBLE_MAGIC 0x42494E47
+
+/*
+ * Address can be actually any value. Here is set to same value as
+ * it is set in BSP driver.
+ */
+#define I2C_ADDR 0x69
+
+static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
+ struct drm_display_mode *mode)
+{
+ struct sun8i_hdmi_phy *phy = (struct sun8i_hdmi_phy *)data;
+ u32 val = 0;
+
+ if ((mode->flags & DRM_MODE_FLAG_NHSYNC) &&
+ (mode->flags & DRM_MODE_FLAG_NHSYNC)) {
+ val = 0x03;
+ }
+
+ regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_DBG_CTRL_REG,
+ SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK,
+ SUN8I_HDMI_PHY_DBG_CTRL_POL(val));
+
+ regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_REXT_CTRL_REG,
+ SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN,
+ SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN);
+
+ /* power down */
+ dw_hdmi_phy_gen2_txpwron(hdmi, 0);
+ dw_hdmi_phy_gen2_pddq(hdmi, 1);
+
+ dw_hdmi_phy_reset(hdmi);
+
+ dw_hdmi_phy_gen2_pddq(hdmi, 0);
+
+ dw_hdmi_phy_i2c_set_addr(hdmi, I2C_ADDR);
+
+ /*
+ * Values are taken from BSP HDMI driver. Although AW didn't
+ * release any documentation, explanation of this values can
+ * be found in i.MX 6Dual/6Quad Reference Manual.
+ */
+ if (mode->crtc_clock <= 27000) {
+ dw_hdmi_phy_i2c_write(hdmi, 0x01e0, 0x06);
+ dw_hdmi_phy_i2c_write(hdmi, 0x0000, 0x15);
+ dw_hdmi_phy_i2c_write(hdmi, 0x08da, 0x10);
+ dw_hdmi_phy_i2c_write(hdmi, 0x0007, 0x19);
+ dw_hdmi_phy_i2c_write(hdmi, 0x0318, 0x0e);
+ dw_hdmi_phy_i2c_write(hdmi, 0x8009, 0x09);
+ } else if (mode->crtc_clock <= 74250) {
+ dw_hdmi_phy_i2c_write(hdmi, 0x0540, 0x06);
+ dw_hdmi_phy_i2c_write(hdmi, 0x0005, 0x15);
+ dw_hdmi_phy_i2c_write(hdmi, 0x0000, 0x10);
+ dw_hdmi_phy_i2c_write(hdmi, 0x0007, 0x19);
+ dw_hdmi_phy_i2c_write(hdmi, 0x02b5, 0x0e);
+ dw_hdmi_phy_i2c_write(hdmi, 0x8009, 0x09);
+ } else if (mode->crtc_clock <= 148500) {
+ dw_hdmi_phy_i2c_write(hdmi, 0x04a0, 0x06);
+ dw_hdmi_phy_i2c_write(hdmi, 0x000a, 0x15);
+ dw_hdmi_phy_i2c_write(hdmi, 0x0000, 0x10);
+ dw_hdmi_phy_i2c_write(hdmi, 0x0002, 0x19);
+ dw_hdmi_phy_i2c_write(hdmi, 0x0021, 0x0e);
+ dw_hdmi_phy_i2c_write(hdmi, 0x8029, 0x09);
+ } else {
+ dw_hdmi_phy_i2c_write(hdmi, 0x0000, 0x06);
+ dw_hdmi_phy_i2c_write(hdmi, 0x000f, 0x15);
+ dw_hdmi_phy_i2c_write(hdmi, 0x0000, 0x10);
+ dw_hdmi_phy_i2c_write(hdmi, 0x0002, 0x19);
+ dw_hdmi_phy_i2c_write(hdmi, 0x0000, 0x0e);
+ dw_hdmi_phy_i2c_write(hdmi, 0x802b, 0x09);
+ }
+
+ dw_hdmi_phy_i2c_write(hdmi, 0x0000, 0x1e);
+ dw_hdmi_phy_i2c_write(hdmi, 0x0000, 0x13);
+ dw_hdmi_phy_i2c_write(hdmi, 0x0000, 0x17);
+
+ dw_hdmi_phy_gen2_txpwron(hdmi, 1);
+
+ return 0;
+};
+
+static void sun8i_hdmi_phy_disable(struct dw_hdmi *hdmi, void *data)
+{
+ struct sun8i_hdmi_phy *phy = (struct sun8i_hdmi_phy *)data;
+
+ dw_hdmi_phy_gen2_txpwron(hdmi, 0);
+ dw_hdmi_phy_gen2_pddq(hdmi, 1);
+
+ regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_REXT_CTRL_REG,
+ SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN, 0);
+}
+
+static const struct dw_hdmi_phy_ops sun8i_hdmi_phy_ops = {
+ .init = &sun8i_hdmi_phy_config,
+ .disable = &sun8i_hdmi_phy_disable,
+ .read_hpd = &dw_hdmi_phy_read_hpd,
+ .update_hpd = &dw_hdmi_phy_update_hpd,
+ .setup_hpd = &dw_hdmi_phy_setup_hpd,
+};
+
+void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy)
+{
+ /* enable read access to HDMI controller */
+ regmap_write(phy->regs, SUN8I_HDMI_PHY_READ_EN_REG,
+ SUN8I_HDMI_PHY_READ_EN_MAGIC);
+
+ /* unscramble register offsets */
+ regmap_write(phy->regs, SUN8I_HDMI_PHY_UNSCRAMBLE_REG,
+ SUN8I_HDMI_PHY_UNSCRAMBLE_MAGIC);
+
+ regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_DBG_CTRL_REG,
+ SUN8I_HDMI_PHY_DBG_CTRL_PX_LOCK,
+ SUN8I_HDMI_PHY_DBG_CTRL_PX_LOCK);
+
+ /*
+ * Set PHY I2C address. It must match to the address set by
+ * dw_hdmi_phy_set_slave_addr().
+ */
+ regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_DBG_CTRL_REG,
+ SUN8I_HDMI_PHY_DBG_CTRL_ADDR_MASK,
+ SUN8I_HDMI_PHY_DBG_CTRL_ADDR(I2C_ADDR));
+}
+
+const struct dw_hdmi_phy_ops *sun8i_hdmi_phy_get_ops(void)
+{
+ return &sun8i_hdmi_phy_ops;
+}
+
+static struct regmap_config sun8i_hdmi_phy_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = SUN8I_HDMI_PHY_UNSCRAMBLE_REG,
+ .name = "phy"
+};
+
+static const struct of_device_id sun8i_hdmi_phy_of_table[] = {
+ { .compatible = "allwinner,sun8i-a83t-hdmi-phy" },
+ { /* sentinel */ }
+};
+
+int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
+{
+ struct device *dev = hdmi->dev;
+ struct sun8i_hdmi_phy *phy;
+ struct resource res;
+ void __iomem *regs;
+ int ret;
+
+ if (!of_match_node(sun8i_hdmi_phy_of_table, node)) {
+ dev_err(dev, "Incompatible HDMI PHY\n");
+ return -EINVAL;
+ }
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret) {
+ dev_err(dev, "phy: Couldn't get our resources\n");
+ return ret;
+ }
+
+ regs = devm_ioremap_resource(dev, &res);
+ if (IS_ERR(regs)) {
+ dev_err(dev, "Couldn't map the HDMI PHY registers\n");
+ return PTR_ERR(regs);
+ }
+
+ phy->regs = devm_regmap_init_mmio(dev, regs,
+ &sun8i_hdmi_phy_regmap_config);
+ if (IS_ERR(phy->regs)) {
+ dev_err(dev, "Couldn't create the HDMI PHY regmap\n");
+ return PTR_ERR(phy->regs);
+ }
+
+ phy->clk_bus = of_clk_get_by_name(node, "bus");
+ if (IS_ERR(phy->clk_bus)) {
+ dev_err(dev, "Could not get bus clock\n");
+ return PTR_ERR(phy->clk_bus);
+ }
+
+ phy->clk_mod = of_clk_get_by_name(node, "mod");
+ if (IS_ERR(phy->clk_mod)) {
+ dev_err(dev, "Could not get mod clock\n");
+ ret = PTR_ERR(phy->clk_mod);
+ goto err_put_clk_bus;
+ }
+
+ phy->rst_phy = of_reset_control_get_shared(node, "phy");
+ if (IS_ERR(phy->rst_phy)) {
+ dev_err(dev, "Could not get phy reset control\n");
+ ret = PTR_ERR(phy->rst_phy);
+ goto err_put_clk_mod;
+ }
+
+ ret = reset_control_deassert(phy->rst_phy);
+ if (ret) {
+ dev_err(dev, "Cannot deassert phy reset control: %d\n", ret);
+ goto err_put_rst_phy;
+ }
+
+ ret = clk_prepare_enable(phy->clk_bus);
+ if (ret) {
+ dev_err(dev, "Cannot enable bus clock: %d\n", ret);
+ goto err_deassert_rst_phy;
+ }
+
+ ret = clk_prepare_enable(phy->clk_mod);
+ if (ret) {
+ dev_err(dev, "Cannot enable mod clock: %d\n", ret);
+ goto err_disable_clk_bus;
+ }
+
+ hdmi->phy = phy;
+
+ return 0;
+
+err_disable_clk_bus:
+ clk_disable_unprepare(phy->clk_bus);
+err_deassert_rst_phy:
+ reset_control_assert(phy->rst_phy);
+err_put_rst_phy:
+ reset_control_put(phy->rst_phy);
+err_put_clk_mod:
+ clk_put(phy->clk_mod);
+err_put_clk_bus:
+ clk_put(phy->clk_bus);
+
+ return ret;
+}
+
+void sun8i_hdmi_phy_remove(struct sun8i_dw_hdmi *hdmi)
+{
+ struct sun8i_hdmi_phy *phy = hdmi->phy;
+
+ clk_disable_unprepare(phy->clk_mod);
+ clk_disable_unprepare(phy->clk_bus);
+
+ reset_control_assert(phy->rst_phy);
+
+ reset_control_put(phy->rst_phy);
+
+ clk_put(phy->clk_mod);
+ clk_put(phy->clk_bus);
+}
--
2.16.1
More information about the linux-arm-kernel
mailing list