[PATCH v3 07/10] clk: qcom: clk-cpu-8996: Prepare PLLs on probe

[Ilia Lin]

The PLLs must be prepared enabled during the probe to be
accessible by the OPPs. Otherwise an OPP may switch
to non-enabled clock.

Signed-off-by: Ilia Lin <ilialin at codeaurora.org>
---
 drivers/clk/qcom/clk-cpu-8996.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/clk-cpu-8996.c b/drivers/clk/qcom/clk-cpu-8996.c
index 854f327..b0a3b73 100644
--- a/drivers/clk/qcom/clk-cpu-8996.c
+++ b/drivers/clk/qcom/clk-cpu-8996.c
@@ -15,7 +15,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
-
+#include <linux/clk-provider.h>
 #include "clk-alpha-pll.h"
 
 #define VCO(a, b, c) { \
@@ -376,6 +376,18 @@ struct clk_hw_clks {
 	clk_alpha_pll_configure(&perfcl_alt_pll, regmap, &altpll_config);
 	clk_alpha_pll_configure(&pwrcl_alt_pll, regmap, &altpll_config);
 
+	/* Enable all PLLs and alt PLLs */
+	clk_prepare_enable(pwrcl_alt_pll.clkr.hw.clk);
+	clk_prepare_enable(perfcl_alt_pll.clkr.hw.clk);
+	clk_prepare_enable(pwrcl_pll.clkr.hw.clk);
+	clk_prepare_enable(perfcl_pll.clkr.hw.clk);
+
+	/* Set initial boot frequencies for power/perf PLLs */
+	clk_set_rate(pwrcl_alt_pll.clkr.hw.clk, 652800000);
+	clk_set_rate(perfcl_alt_pll.clkr.hw.clk, 652800000);
+	clk_set_rate(pwrcl_pll.clkr.hw.clk, 652800000);
+	clk_set_rate(perfcl_pll.clkr.hw.clk, 652800000);
+
 	ret = clk_notifier_register(pwrcl_pmux.clkr.hw.clk, &pwrcl_pmux.nb);
 	if (ret)
 		return ret;
-- 
1.9.1