[PATCH 05/15] ARM64: dts: Add R-Car Salvator-x M3-N support
Geert Uytterhoeven
geert at linux-m68k.org
Wed Feb 14 05:58:34 PST 2018
Hi Jacopo,
On Tue, Feb 13, 2018 at 10:45 AM, Jacopo Mondi
<jacopo+renesas at jmondi.org> wrote:
> Add initial support for R-Car M3-N Salvator-x and r8a77965 SoC in
> device tree with cpg-mssr, reset and clock nodes.
>
> Add place-holder device nodes for all nodes referred by
> "salvator-common.dtsi"
>
> Signed-off-by: Jacopo Mondi <jacopo+renesas at jmondi.org>
Thanks for your patch!
Looks mostly fine to me.
P.S. scripts/dtc/dtx_diff arch/arm64/boot/dts/renesas/r8a7796{,5}-salvator-x.dtb
is your friend.
> arch/arm64/Kconfig.platforms | 6 +
> arch/arm64/boot/dts/renesas/Makefile | 1 +
> .../arm64/boot/dts/renesas/r8a77965-salvator-x.dts | 30 ++
> arch/arm64/boot/dts/renesas/r8a77965.dtsi | 495 +++++++++++++++++++++
> 4 files changed, 532 insertions(+)
> create mode 100644 arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
> create mode 100644 arch/arm64/boot/dts/renesas/r8a77965.dtsi
The maintainer will probably ask you to split this in three parts:
- ARCH_R8A77965
- r8a77965.dtsi
- r8a77965-salvator-x.dts
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
> @@ -0,0 +1,30 @@
> +// SPDX-License-Identifier: GPL-2.
> +/*
> + * Device Tree Source for the Salvator-X board
with R-Car M3-N
> + *
> + * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas at jmondi.org>
> + */
> +
> +/dts-v1/;
> +#include "r8a77965.dtsi"
> +#include "salvator-x.dtsi"
> +
> +/ {
> + model = "Renesas Salvator-X board based on r8a77965";
> + compatible = "renesas,salvator-x", "renesas,r8a77965";
> +
> + aliases {
> + serial0 = &scif2;
> + };
> +
> + chosen {
> + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
> + stdout-path = "serial0:115200n8";
> + };
Both aliases and chosen are already defined in salvator-common.dtsi,
included via salvator-x.dtsi.
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
> @@ -0,0 +1,495 @@
> +// SPDX-License-Identifier: GPL-2.
> +/*
> + * Device Tree Source for the r8a77965 SoC
> + *
> + * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas at jmondi.org>
> + *
> + * Based on r8a7796.dtsi
> + * Copyright (C) 2016 Renesas Electronics Corp.
> + */
> +
> +#include <dt-bindings/clock/r8a77965-cpg-mssr.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/power/r8a77965-sysc.h>
> +
> +#define CPG_AUDIO_CLK_I R8A77965_CLK_S0D4
> +
> +/ {
> + soc {
> + compatible = "simple-bus";
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13
> + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14
> + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11
> + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10
> + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
> + };
Please move the timer out of the soc node, as it does't have a unit address
and a reg property.
> + pmu_a57 {
> + compatible = "arm,cortex-a57-pmu";
> + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-affinity = <&a57_0>,
> + <&a57_1>;
> + };
Please move the pmu out of the soc node, as it does't have a unit address
and a reg property.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
More information about the linux-arm-kernel
mailing list