[PATCH v3 20/25] ASoC: qcom: q6afe: add support to MI2S sysclks
srinivas.kandagatla at linaro.org
srinivas.kandagatla at linaro.org
Tue Feb 13 08:58:32 PST 2018
From: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
This patch adds support to LPASS Bit clock, LPASS Digital
core clock and OSR clock. These clocks are required for both
MI2S and PCM setup.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
---
sound/soc/qcom/qdsp6/q6afe.c | 115 +++++++++++++++++++++++++++++++++++++++++++
sound/soc/qcom/qdsp6/q6afe.h | 10 ++++
2 files changed, 125 insertions(+)
diff --git a/sound/soc/qcom/qdsp6/q6afe.c b/sound/soc/qcom/qdsp6/q6afe.c
index c04caea5481c..ea6fa3848007 100644
--- a/sound/soc/qcom/qdsp6/q6afe.c
+++ b/sound/soc/qcom/qdsp6/q6afe.c
@@ -31,6 +31,9 @@
#define AFE_PARAM_ID_CDC_SLIMBUS_SLAVE_CFG 0x00010235
+#define AFE_PARAM_ID_LPAIF_CLK_CONFIG 0x00010238
+#define AFE_PARAM_ID_INTERNAL_DIGITAL_CDC_CLK_CONFIG 0x00010239
+
#define AFE_PARAM_ID_SLIMBUS_CONFIG 0x00010212
#define AFE_PARAM_ID_I2S_CONFIG 0x0001020D
@@ -94,6 +97,11 @@
#define AFE_PORT_ID_QUATERNARY_MI2S_RX 0x1006
#define AFE_PORT_ID_QUATERNARY_MI2S_TX 0x1007
+#define Q6AFE_LPASS_MODE_CLK1_VALID 1
+#define Q6AFE_LPASS_MODE_CLK2_VALID 2
+#define Q6AFE_LPASS_CLK_SRC_INTERNAL 1
+#define Q6AFE_LPASS_CLK_ROOT_DEFAULT 0
+
#define TIMEOUT_MS 1000
#define AFE_CMD_RESP_AVAIL 0
#define AFE_CMD_RESP_NONE 1
@@ -191,6 +199,23 @@ struct afe_param_id_slimbus_cfg {
*/
} __packed;
+struct afe_clk_cfg {
+ u32 i2s_cfg_minor_version;
+ u32 clk_val1;
+ u32 clk_val2;
+ u16 clk_src;
+ u16 clk_root;
+ u16 clk_set_mode;
+ u16 reserved;
+} __packed;
+
+struct afe_digital_clk_cfg {
+ u32 i2s_cfg_minor_version;
+ u32 clk_val;
+ u16 clk_root;
+ u16 reserved;
+} __packed;
+
struct afe_param_id_i2s_cfg {
u32 i2s_cfg_minor_version;
u16 bit_width;
@@ -208,6 +233,21 @@ union afe_port_config {
struct afe_param_id_i2s_cfg i2s_cfg;
} __packed;
+struct afe_lpass_clk_config_command {
+ struct apr_hdr hdr;
+ struct afe_port_cmd_set_param_v2 param;
+ struct afe_port_param_data_v2 pdata;
+ struct afe_clk_cfg clk_cfg;
+} __packed;
+
+struct afe_lpass_digital_clk_config_command {
+ struct apr_hdr hdr;
+ struct afe_port_cmd_set_param_v2 param;
+ struct afe_port_param_data_v2 pdata;
+ struct afe_digital_clk_cfg clk_cfg;
+} __packed;
+
+/* This param id is used to configure internal clk */
struct q6afe_port {
wait_queue_head_t wait;
union afe_port_config port_cfg;
@@ -425,6 +465,81 @@ static int q6afe_port_set_param_v2(struct q6afe_port *port, void *data,
return ret;
}
+static int q6afe_set_lpass_clock(struct q6afe_port *port,
+ struct afe_clk_cfg *cfg)
+{
+ struct afe_lpass_clk_config_command clk_cfg = {0};
+ int param_id = AFE_PARAM_ID_LPAIF_CLK_CONFIG;
+ struct q6afe *afe = port->afe;
+
+ if (!cfg) {
+ dev_err(afe->dev, "clock cfg is NULL\n");
+ return -EINVAL;
+ }
+
+ clk_cfg.clk_cfg = *cfg;
+
+ return q6afe_port_set_param_v2(port, &clk_cfg, param_id, sizeof(*cfg));
+}
+
+static int q6afe_set_digital_codec_core_clock(struct q6afe_port *port,
+ struct afe_digital_clk_cfg *cfg)
+{
+ struct afe_lpass_digital_clk_config_command clk_cfg = {0};
+ int param_id = AFE_PARAM_ID_INTERNAL_DIGITAL_CDC_CLK_CONFIG;
+ struct q6afe *afe = port->afe;
+
+ if (!cfg) {
+ dev_err(afe->dev, "clock cfg is NULL\n");
+ return -EINVAL;
+ }
+
+ clk_cfg.clk_cfg = *cfg;
+
+ return q6afe_port_set_param_v2(port, &clk_cfg, param_id, sizeof(*cfg));
+}
+
+int q6afe_port_set_sysclk(struct q6afe_port *port, int clk_id,
+ int clk_src, int clk_root,
+ unsigned int freq, int dir)
+{
+ struct afe_clk_cfg ccfg = {0,};
+ struct afe_digital_clk_cfg dcfg = {0,};
+ int ret;
+
+ switch (clk_id) {
+ case LPAIF_DIG_CLK:
+ dcfg.i2s_cfg_minor_version = AFE_API_VERSION_I2S_CONFIG;
+ dcfg.clk_val = freq;
+ dcfg.clk_root = clk_root;
+ ret = q6afe_set_digital_codec_core_clock(port, &dcfg);
+ break;
+ case LPAIF_BIT_CLK:
+ ccfg.i2s_cfg_minor_version = AFE_API_VERSION_I2S_CONFIG;
+ ccfg.clk_val1 = freq;
+ ccfg.clk_src = clk_src;
+ ccfg.clk_root = clk_root;
+ ccfg.clk_set_mode = Q6AFE_LPASS_MODE_CLK1_VALID;
+ ret = q6afe_set_lpass_clock(port, &ccfg);
+ break;
+
+ case LPAIF_OSR_CLK:
+ ccfg.i2s_cfg_minor_version = AFE_API_VERSION_I2S_CONFIG;
+ ccfg.clk_val2 = freq;
+ ccfg.clk_src = clk_src;
+ ccfg.clk_root = clk_root;
+ ccfg.clk_set_mode = Q6AFE_LPASS_MODE_CLK2_VALID;
+ ret = q6afe_set_lpass_clock(port, &ccfg);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(q6afe_port_set_sysclk);
+
static int afe_port_start(struct q6afe_port *port,
union afe_port_config *afe_config)
{
diff --git a/sound/soc/qcom/qdsp6/q6afe.h b/sound/soc/qcom/qdsp6/q6afe.h
index 9114d68a79cb..c469f6de38d2 100644
--- a/sound/soc/qcom/qdsp6/q6afe.h
+++ b/sound/soc/qcom/qdsp6/q6afe.h
@@ -14,6 +14,13 @@
#define AFE_MAX_CHAN_COUNT 8
#define AFE_PORT_MAX_AUDIO_CHAN_CNT 0x8
+#define Q6AFE_LPASS_CLK_SRC_INTERNAL 1
+#define Q6AFE_LPASS_CLK_ROOT_DEFAULT 0
+
+#define LPAIF_DIG_CLK 1
+#define LPAIF_BIT_CLK 2
+#define LPAIF_OSR_CLK 3
+
struct q6afe_hdmi_cfg {
u16 datatype;
u16 channel_allocation;
@@ -61,4 +68,7 @@ void q6afe_slim_port_prepare(struct q6afe_port *port,
struct q6afe_slim_cfg *cfg);
void q6afe_i2s_port_prepare(struct q6afe_port *port, struct q6afe_i2s_cfg *cfg);
+int q6afe_port_set_sysclk(struct q6afe_port *port, int clk_id,
+ int clk_src, int clk_root,
+ unsigned int freq, int dir);
#endif /* __Q6AFE_H__ */
--
2.15.1
More information about the linux-arm-kernel
mailing list