Applied "ASoC: uniphier: add support for UniPhier AIO common driver" to the asoc tree
Mark Brown
broonie at kernel.org
Mon Feb 12 04:54:31 PST 2018
The patch
ASoC: uniphier: add support for UniPhier AIO common driver
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From f37fe2f9987b0460f25a87b1380f8e97a5959121 Mon Sep 17 00:00:00 2001
From: Katsuhiro Suzuki <suzuki.katsuhiro at socionext.com>
Date: Fri, 19 Jan 2018 18:25:29 +0900
Subject: [PATCH] ASoC: uniphier: add support for UniPhier AIO common driver
This patch adds common functions for UniPhier AIO audio sound
system. This provides commonly used APIs for input/output control
registers for UniPhier AIO.
This module provides all sound devices for I2S, S/PDIF and so on.
Since the AIO has mixed register map for those I/Os, it is hard
to split register areas for each sound devices.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro at socionext.com>
Signed-off-by: Mark Brown <broonie at kernel.org>
---
sound/soc/uniphier/Kconfig | 10 +
sound/soc/uniphier/Makefile | 4 +
sound/soc/uniphier/aio-core.c | 1104 +++++++++++++++++++++++++++++++++++++++++
sound/soc/uniphier/aio-reg.h | 462 +++++++++++++++++
sound/soc/uniphier/aio.h | 343 +++++++++++++
5 files changed, 1923 insertions(+)
create mode 100644 sound/soc/uniphier/aio-core.c
create mode 100644 sound/soc/uniphier/aio-reg.h
create mode 100644 sound/soc/uniphier/aio.h
diff --git a/sound/soc/uniphier/Kconfig b/sound/soc/uniphier/Kconfig
index 02886a457eaf..78ce101d2cc2 100644
--- a/sound/soc/uniphier/Kconfig
+++ b/sound/soc/uniphier/Kconfig
@@ -8,6 +8,16 @@ config SND_SOC_UNIPHIER
audio interfaces to support below.
If unsure select "N".
+config SND_SOC_UNIPHIER_AIO
+ tristate "UniPhier AIO DAI Driver"
+ select REGMAP_MMIO
+ depends on SND_SOC_UNIPHIER
+ help
+ This adds ASoC driver support for Socionext UniPhier
+ 'AIO' Audio Input/Output subsystem.
+ Select Y if you use such device.
+ If unsure select "N".
+
config SND_SOC_UNIPHIER_EVEA_CODEC
tristate "UniPhier SoC internal audio codec"
depends on SND_SOC_UNIPHIER
diff --git a/sound/soc/uniphier/Makefile b/sound/soc/uniphier/Makefile
index 3be00d72f5e5..f3b36aba4879 100644
--- a/sound/soc/uniphier/Makefile
+++ b/sound/soc/uniphier/Makefile
@@ -1,3 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
+snd-soc-uniphier-aio-cpu-objs := aio-core.o
+
+obj-$(CONFIG_SND_SOC_UNIPHIER_AIO) += snd-soc-uniphier-aio-cpu.o
+
snd-soc-uniphier-evea-objs := evea.o
obj-$(CONFIG_SND_SOC_UNIPHIER_EVEA_CODEC) += snd-soc-uniphier-evea.o
diff --git a/sound/soc/uniphier/aio-core.c b/sound/soc/uniphier/aio-core.c
new file mode 100644
index 000000000000..7e9451ca24af
--- /dev/null
+++ b/sound/soc/uniphier/aio-core.c
@@ -0,0 +1,1104 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Socionext UniPhier AIO ALSA common driver.
+//
+// Copyright (c) 2016-2018 Socionext Inc.
+//
+// This program is free software; you can redistribute it and/or
+// modify it under the terms of the GNU General Public License
+// as published by the Free Software Foundation; version 2
+// of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, see <http://www.gnu.org/licenses/>.
+
+#include <linux/bitfield.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include "aio.h"
+#include "aio-reg.h"
+
+static u64 rb_cnt(u64 wr, u64 rd, u64 len)
+{
+ if (rd <= wr)
+ return wr - rd;
+ else
+ return len - (rd - wr);
+}
+
+static u64 rb_cnt_to_end(u64 wr, u64 rd, u64 len)
+{
+ if (rd <= wr)
+ return wr - rd;
+ else
+ return len - rd;
+}
+
+static u64 rb_space(u64 wr, u64 rd, u64 len)
+{
+ if (rd <= wr)
+ return len - (wr - rd) - 8;
+ else
+ return rd - wr - 8;
+}
+
+static u64 rb_space_to_end(u64 wr, u64 rd, u64 len)
+{
+ if (rd > wr)
+ return rd - wr - 8;
+ else if (rd > 0)
+ return len - wr;
+ else
+ return len - wr - 8;
+}
+
+u64 aio_rb_cnt(struct uniphier_aio_sub *sub)
+{
+ return rb_cnt(sub->wr_offs, sub->rd_offs, sub->compr_bytes);
+}
+
+u64 aio_rbt_cnt_to_end(struct uniphier_aio_sub *sub)
+{
+ return rb_cnt_to_end(sub->wr_offs, sub->rd_offs, sub->compr_bytes);
+}
+
+u64 aio_rb_space(struct uniphier_aio_sub *sub)
+{
+ return rb_space(sub->wr_offs, sub->rd_offs, sub->compr_bytes);
+}
+
+u64 aio_rb_space_to_end(struct uniphier_aio_sub *sub)
+{
+ return rb_space_to_end(sub->wr_offs, sub->rd_offs, sub->compr_bytes);
+}
+
+/**
+ * aio_chip_set_pll - set frequency to audio PLL
+ * @chip : the AIO chip pointer
+ * @source: PLL
+ * @freq : frequency in Hz, 0 is ignored
+ *
+ * Sets frequency of audio PLL. This function can be called anytime,
+ * but it takes time till PLL is locked.
+ *
+ * Return: Zero if successful, otherwise a negative value on error.
+ */
+int aio_chip_set_pll(struct uniphier_aio_chip *chip, int pll_id,
+ unsigned int freq)
+{
+ struct device *dev = &chip->pdev->dev;
+ struct regmap *r = chip->regmap;
+ int shift;
+ u32 v;
+
+ /* Not change */
+ if (freq == 0)
+ return 0;
+
+ switch (pll_id) {
+ case AUD_PLL_A1:
+ shift = 0;
+ break;
+ case AUD_PLL_F1:
+ shift = 1;
+ break;
+ case AUD_PLL_A2:
+ shift = 2;
+ break;
+ case AUD_PLL_F2:
+ shift = 3;
+ break;
+ default:
+ dev_err(dev, "PLL(%d) not supported\n", pll_id);
+ return -EINVAL;
+ }
+
+ switch (freq) {
+ case 36864000:
+ v = A2APLLCTR1_APLLX_36MHZ;
+ break;
+ case 33868800:
+ v = A2APLLCTR1_APLLX_33MHZ;
+ break;
+ default:
+ dev_err(dev, "PLL frequency not supported(%d)\n", freq);
+ return -EINVAL;
+ }
+ chip->plls[pll_id].freq = freq;
+
+ regmap_update_bits(r, A2APLLCTR1, A2APLLCTR1_APLLX_MASK << shift,
+ v << shift);
+
+ return 0;
+}
+
+/**
+ * aio_chip_init - initialize AIO whole settings
+ * @chip: the AIO chip pointer
+ *
+ * Sets AIO fixed and whole device settings to AIO.
+ * This function need to call once at driver startup.
+ *
+ * The register area that is changed by this function is shared by all
+ * modules of AIO. But there is not race condition since this function
+ * has always set the same initialize values.
+ */
+void aio_chip_init(struct uniphier_aio_chip *chip)
+{
+ struct regmap *r = chip->regmap;
+
+ regmap_update_bits(r, A2APLLCTR0,
+ A2APLLCTR0_APLLXPOW_MASK,
+ A2APLLCTR0_APLLXPOW_PWON);
+
+ regmap_update_bits(r, A2EXMCLKSEL0,
+ A2EXMCLKSEL0_EXMCLK_MASK,
+ A2EXMCLKSEL0_EXMCLK_OUTPUT);
+
+ regmap_update_bits(r, A2AIOINPUTSEL, A2AIOINPUTSEL_RXSEL_MASK,
+ A2AIOINPUTSEL_RXSEL_PCMI1_HDMIRX1 |
+ A2AIOINPUTSEL_RXSEL_PCMI2_SIF |
+ A2AIOINPUTSEL_RXSEL_PCMI3_EVEA |
+ A2AIOINPUTSEL_RXSEL_IECI1_HDMIRX1);
+
+ if (chip->chip_spec->addr_ext)
+ regmap_update_bits(r, CDA2D_TEST, CDA2D_TEST_DDR_MODE_MASK,
+ CDA2D_TEST_DDR_MODE_EXTON0);
+ else
+ regmap_update_bits(r, CDA2D_TEST, CDA2D_TEST_DDR_MODE_MASK,
+ CDA2D_TEST_DDR_MODE_EXTOFF1);
+}
+
+/**
+ * aio_init - initialize AIO substream
+ * @sub: the AIO substream pointer
+ *
+ * Sets fixed settings of each AIO substreams.
+ * This function need to call once at substream startup.
+ *
+ * Return: Zero if successful, otherwise a negative value on error.
+ */
+int aio_init(struct uniphier_aio_sub *sub)
+{
+ struct device *dev = &sub->aio->chip->pdev->dev;
+ struct regmap *r = sub->aio->chip->regmap;
+
+ regmap_write(r, A2RBNMAPCTR0(sub->swm->rb.hw),
+ MAPCTR0_EN | sub->swm->rb.map);
+ regmap_write(r, A2CHNMAPCTR0(sub->swm->ch.hw),
+ MAPCTR0_EN | sub->swm->ch.map);
+
+ switch (sub->swm->type) {
+ case PORT_TYPE_I2S:
+ case PORT_TYPE_SPDIF:
+ case PORT_TYPE_EVE:
+ if (sub->swm->dir == PORT_DIR_INPUT) {
+ regmap_write(r, A2IIFNMAPCTR0(sub->swm->iif.hw),
+ MAPCTR0_EN | sub->swm->iif.map);
+ regmap_write(r, A2IPORTNMAPCTR0(sub->swm->iport.hw),
+ MAPCTR0_EN | sub->swm->iport.map);
+ } else {
+ regmap_write(r, A2OIFNMAPCTR0(sub->swm->oif.hw),
+ MAPCTR0_EN | sub->swm->oif.map);
+ regmap_write(r, A2OPORTNMAPCTR0(sub->swm->oport.hw),
+ MAPCTR0_EN | sub->swm->oport.map);
+ }
+ break;
+ case PORT_TYPE_CONV:
+ regmap_write(r, A2OIFNMAPCTR0(sub->swm->oif.hw),
+ MAPCTR0_EN | sub->swm->oif.map);
+ regmap_write(r, A2OPORTNMAPCTR0(sub->swm->oport.hw),
+ MAPCTR0_EN | sub->swm->oport.map);
+ regmap_write(r, A2CHNMAPCTR0(sub->swm->och.hw),
+ MAPCTR0_EN | sub->swm->och.map);
+ regmap_write(r, A2IIFNMAPCTR0(sub->swm->iif.hw),
+ MAPCTR0_EN | sub->swm->iif.map);
+ break;
+ default:
+ dev_err(dev, "Unknown port type %d.\n", sub->swm->type);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * aio_port_reset - reset AIO port block
+ * @sub: the AIO substream pointer
+ *
+ * Resets the digital signal input/output port block of AIO.
+ */
+void aio_port_reset(struct uniphier_aio_sub *sub)
+{
+ struct regmap *r = sub->aio->chip->regmap;
+
+ if (sub->swm->dir == PORT_DIR_OUTPUT) {
+ regmap_write(r, AOUTRSTCTR0, BIT(sub->swm->oport.map));
+ regmap_write(r, AOUTRSTCTR1, BIT(sub->swm->oport.map));
+ } else {
+ regmap_update_bits(r, IPORTMXRSTCTR(sub->swm->iport.map),
+ IPORTMXRSTCTR_RSTPI_MASK,
+ IPORTMXRSTCTR_RSTPI_RESET);
+ regmap_update_bits(r, IPORTMXRSTCTR(sub->swm->iport.map),
+ IPORTMXRSTCTR_RSTPI_MASK,
+ IPORTMXRSTCTR_RSTPI_RELEASE);
+ }
+}
+
+/**
+ * aio_port_set_rate - set sampling rate of LPCM
+ * @sub: the AIO substream pointer, PCM substream only
+ * @rate: Sampling rate in Hz.
+ *
+ * Set suitable I2S format settings to input/output port block of AIO.
+ * Parameter is specified by hw_params().
+ *
+ * This function may return error if non-PCM substream.
+ *
+ * Return: Zero if successful, otherwise a negative value on error.
+ */
+int aio_port_set_rate(struct uniphier_aio_sub *sub, int rate)
+{
+ struct regmap *r = sub->aio->chip->regmap;
+ struct device *dev = &sub->aio->chip->pdev->dev;
+ u32 v;
+
+ if (sub->swm->dir == PORT_DIR_OUTPUT) {
+ switch (rate) {
+ case 8000:
+ v = OPORTMXCTR1_FSSEL_8;
+ break;
+ case 11025:
+ v = OPORTMXCTR1_FSSEL_11_025;
+ break;
+ case 12000:
+ v = OPORTMXCTR1_FSSEL_12;
+ break;
+ case 16000:
+ v = OPORTMXCTR1_FSSEL_16;
+ break;
+ case 22050:
+ v = OPORTMXCTR1_FSSEL_22_05;
+ break;
+ case 24000:
+ v = OPORTMXCTR1_FSSEL_24;
+ break;
+ case 32000:
+ v = OPORTMXCTR1_FSSEL_32;
+ break;
+ case 44100:
+ v = OPORTMXCTR1_FSSEL_44_1;
+ break;
+ case 48000:
+ v = OPORTMXCTR1_FSSEL_48;
+ break;
+ case 88200:
+ v = OPORTMXCTR1_FSSEL_88_2;
+ break;
+ case 96000:
+ v = OPORTMXCTR1_FSSEL_96;
+ break;
+ case 176400:
+ v = OPORTMXCTR1_FSSEL_176_4;
+ break;
+ case 192000:
+ v = OPORTMXCTR1_FSSEL_192;
+ break;
+ default:
+ dev_err(dev, "Rate not supported(%d)\n", rate);
+ return -EINVAL;
+ }
+
+ regmap_update_bits(r, OPORTMXCTR1(sub->swm->oport.map),
+ OPORTMXCTR1_FSSEL_MASK, v);
+ } else {
+ switch (rate) {
+ case 8000:
+ v = IPORTMXCTR1_FSSEL_8;
+ break;
+ case 11025:
+ v = IPORTMXCTR1_FSSEL_11_025;
+ break;
+ case 12000:
+ v = IPORTMXCTR1_FSSEL_12;
+ break;
+ case 16000:
+ v = IPORTMXCTR1_FSSEL_16;
+ break;
+ case 22050:
+ v = IPORTMXCTR1_FSSEL_22_05;
+ break;
+ case 24000:
+ v = IPORTMXCTR1_FSSEL_24;
+ break;
+ case 32000:
+ v = IPORTMXCTR1_FSSEL_32;
+ break;
+ case 44100:
+ v = IPORTMXCTR1_FSSEL_44_1;
+ break;
+ case 48000:
+ v = IPORTMXCTR1_FSSEL_48;
+ break;
+ case 88200:
+ v = IPORTMXCTR1_FSSEL_88_2;
+ break;
+ case 96000:
+ v = IPORTMXCTR1_FSSEL_96;
+ break;
+ case 176400:
+ v = IPORTMXCTR1_FSSEL_176_4;
+ break;
+ case 192000:
+ v = IPORTMXCTR1_FSSEL_192;
+ break;
+ default:
+ dev_err(dev, "Rate not supported(%d)\n", rate);
+ return -EINVAL;
+ }
+
+ regmap_update_bits(r, IPORTMXCTR1(sub->swm->iport.map),
+ IPORTMXCTR1_FSSEL_MASK, v);
+ }
+
+ return 0;
+}
+
+/**
+ * aio_port_set_fmt - set format of I2S data
+ * @sub: the AIO substream pointer, PCM substream only
+ * This parameter has no effect if substream is I2S or PCM.
+ *
+ * Set suitable I2S format settings to input/output port block of AIO.
+ * Parameter is specified by set_fmt().
+ *
+ * This function may return error if non-PCM substream.
+ *
+ * Return: Zero if successful, otherwise a negative value on error.
+ */
+int aio_port_set_fmt(struct uniphier_aio_sub *sub)
+{
+ struct regmap *r = sub->aio->chip->regmap;
+ struct device *dev = &sub->aio->chip->pdev->dev;
+ u32 v;
+
+ if (sub->swm->dir == PORT_DIR_OUTPUT) {
+ switch (sub->aio->fmt) {
+ case SND_SOC_DAIFMT_LEFT_J:
+ v = OPORTMXCTR1_I2SLRSEL_LEFT;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ v = OPORTMXCTR1_I2SLRSEL_RIGHT;
+ break;
+ case SND_SOC_DAIFMT_I2S:
+ v = OPORTMXCTR1_I2SLRSEL_I2S;
+ break;
+ default:
+ dev_err(dev, "Format is not supported(%d)\n",
+ sub->aio->fmt);
+ return -EINVAL;
+ }
+
+ v |= OPORTMXCTR1_OUTBITSEL_24;
+ regmap_update_bits(r, OPORTMXCTR1(sub->swm->oport.map),
+ OPORTMXCTR1_I2SLRSEL_MASK |
+ OPORTMXCTR1_OUTBITSEL_MASK, v);
+ } else {
+ switch (sub->aio->fmt) {
+ case SND_SOC_DAIFMT_LEFT_J:
+ v = IPORTMXCTR1_LRSEL_LEFT;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ v = IPORTMXCTR1_LRSEL_RIGHT;
+ break;
+ case SND_SOC_DAIFMT_I2S:
+ v = IPORTMXCTR1_LRSEL_I2S;
+ break;
+ default:
+ dev_err(dev, "Format is not supported(%d)\n",
+ sub->aio->fmt);
+ return -EINVAL;
+ }
+
+ v |= IPORTMXCTR1_OUTBITSEL_24 |
+ IPORTMXCTR1_CHSEL_ALL;
+ regmap_update_bits(r, IPORTMXCTR1(sub->swm->iport.map),
+ IPORTMXCTR1_LRSEL_MASK |
+ IPORTMXCTR1_OUTBITSEL_MASK |
+ IPORTMXCTR1_CHSEL_MASK, v);
+ }
+
+ return 0;
+}
+
+/**
+ * aio_port_set_clk - set clock and divider of AIO port block
+ * @sub: the AIO substream pointer
+ *
+ * Set suitable PLL clock divider and relational settings to
+ * input/output port block of AIO. Parameters are specified by
+ * set_sysclk() and set_pll().
+ *
+ * Return: Zero if successful, otherwise a negative value on error.
+ */
+int aio_port_set_clk(struct uniphier_aio_sub *sub)
+{
+ struct uniphier_aio_chip *chip = sub->aio->chip;
+ struct device *dev = &sub->aio->chip->pdev->dev;
+ struct regmap *r = sub->aio->chip->regmap;
+ u32 v_pll[] = {
+ OPORTMXCTR2_ACLKSEL_A1, OPORTMXCTR2_ACLKSEL_F1,
+ OPORTMXCTR2_ACLKSEL_A2, OPORTMXCTR2_ACLKSEL_F2,
+ OPORTMXCTR2_ACLKSEL_A2PLL,
+ OPORTMXCTR2_ACLKSEL_RX1,
+ };
+ u32 v_div[] = {
+ OPORTMXCTR2_DACCKSEL_1_2, OPORTMXCTR2_DACCKSEL_1_3,
+ OPORTMXCTR2_DACCKSEL_1_1, OPORTMXCTR2_DACCKSEL_2_3,
+ };
+ u32 v;
+
+ if (sub->swm->dir == PORT_DIR_OUTPUT) {
+ if (sub->swm->type == PORT_TYPE_I2S) {
+ if (sub->aio->pll_out >= ARRAY_SIZE(v_pll)) {
+ dev_err(dev, "PLL(%d) is invalid\n",
+ sub->aio->pll_out);
+ return -EINVAL;
+ }
+ if (sub->aio->plldiv >= ARRAY_SIZE(v_div)) {
+ dev_err(dev, "PLL divider(%d) is invalid\n",
+ sub->aio->plldiv);
+ return -EINVAL;
+ }
+
+ v = v_pll[sub->aio->pll_out] |
+ OPORTMXCTR2_MSSEL_MASTER |
+ v_div[sub->aio->plldiv];
+
+ switch (chip->plls[sub->aio->pll_out].freq) {
+ case 0:
+ case 36864000:
+ case 33868800:
+ v |= OPORTMXCTR2_EXTLSIFSSEL_36;
+ break;
+ default:
+ v |= OPORTMXCTR2_EXTLSIFSSEL_24;
+ break;
+ }
+ } else if (sub->swm->type == PORT_TYPE_EVE) {
+ v = OPORTMXCTR2_ACLKSEL_A2PLL |
+ OPORTMXCTR2_MSSEL_MASTER |
+ OPORTMXCTR2_EXTLSIFSSEL_36 |
+ OPORTMXCTR2_DACCKSEL_1_2;
+ } else {
+ if (sub->aio->pll_out >= ARRAY_SIZE(v_pll)) {
+ dev_err(dev, "PLL(%d) is invalid\n",
+ sub->aio->pll_out);
+ return -EINVAL;
+ }
+ v = v_pll[sub->aio->pll_out] |
+ OPORTMXCTR2_MSSEL_MASTER |
+ OPORTMXCTR2_DACCKSEL_1_2;
+
+ switch (chip->plls[sub->aio->pll_out].freq) {
+ case 0:
+ case 36864000:
+ case 33868800:
+ v |= OPORTMXCTR2_EXTLSIFSSEL_36;
+ break;
+ default:
+ v |= OPORTMXCTR2_EXTLSIFSSEL_24;
+ break;
+ }
+ }
+ regmap_write(r, OPORTMXCTR2(sub->swm->oport.map), v);
+ } else {
+ v = IPORTMXCTR2_ACLKSEL_A1 |
+ IPORTMXCTR2_MSSEL_SLAVE |
+ IPORTMXCTR2_EXTLSIFSSEL_36 |
+ IPORTMXCTR2_DACCKSEL_1_2;
+ regmap_write(r, IPORTMXCTR2(sub->swm->iport.map), v);
+ }
+
+ return 0;
+}
+
+/**
+ * aio_port_set_param - set parameters of AIO port block
+ * @sub: the AIO substream pointer
+ * @pass_through: Zero if sound data is LPCM, otherwise if data is not LPCM.
+ * This parameter has no effect if substream is I2S or PCM.
+ * @params: hardware parameters of ALSA
+ *
+ * Set suitable setting to input/output port block of AIO to process the
+ * specified in params.
+ *
+ * Return: Zero if successful, otherwise a negative value on error.
+ */
+int aio_port_set_param(struct uniphier_aio_sub *sub, int pass_through,
+ const struct snd_pcm_hw_params *params)
+{
+ struct regmap *r = sub->aio->chip->regmap;
+ u32 v;
+ int ret;
+
+ if (!pass_through) {
+ ret = aio_port_set_rate(sub, params_rate(params));
+ if (ret)
+ return ret;
+
+ ret = aio_port_set_fmt(sub);
+ if (ret)
+ return ret;
+ }
+
+ ret = aio_port_set_clk(sub);
+ if (ret)
+ return ret;
+
+ if (sub->swm->dir == PORT_DIR_OUTPUT) {
+ if (pass_through)
+ v = OPORTMXCTR3_SRCSEL_STREAM |
+ OPORTMXCTR3_VALID_STREAM;
+ else
+ v = OPORTMXCTR3_SRCSEL_PCM |
+ OPORTMXCTR3_VALID_PCM;
+
+ v |= OPORTMXCTR3_IECTHUR_IECOUT |
+ OPORTMXCTR3_PMSEL_PAUSE |
+ OPORTMXCTR3_PMSW_MUTE_OFF;
+ regmap_write(r, OPORTMXCTR3(sub->swm->oport.map), v);
+ } else {
+ regmap_write(r, IPORTMXACLKSEL0EX(sub->swm->iport.map),
+ IPORTMXACLKSEL0EX_ACLKSEL0EX_INTERNAL);
+ regmap_write(r, IPORTMXEXNOE(sub->swm->iport.map),
+ IPORTMXEXNOE_PCMINOE_INPUT);
+ }
+
+ return 0;
+}
+
+/**
+ * aio_port_set_enable - start or stop of AIO port block
+ * @sub: the AIO substream pointer
+ * @enable: zero to stop the block, otherwise to start
+ *
+ * Start or stop the signal input/output port block of AIO.
+ */
+void aio_port_set_enable(struct uniphier_aio_sub *sub, int enable)
+{
+ struct regmap *r = sub->aio->chip->regmap;
+
+ if (sub->swm->dir == PORT_DIR_OUTPUT) {
+ regmap_write(r, OPORTMXPATH(sub->swm->oport.map),
+ sub->swm->oif.map);
+
+ regmap_update_bits(r, OPORTMXMASK(sub->swm->oport.map),
+ OPORTMXMASK_IUDXMSK_MASK |
+ OPORTMXMASK_IUXCKMSK_MASK |
+ OPORTMXMASK_DXMSK_MASK |
+ OPORTMXMASK_XCKMSK_MASK,
+ OPORTMXMASK_IUDXMSK_OFF |
+ OPORTMXMASK_IUXCKMSK_OFF |
+ OPORTMXMASK_DXMSK_OFF |
+ OPORTMXMASK_XCKMSK_OFF);
+
+ if (enable)
+ regmap_write(r, AOUTENCTR0, BIT(sub->swm->oport.map));
+ else
+ regmap_write(r, AOUTENCTR1, BIT(sub->swm->oport.map));
+ } else {
+ regmap_update_bits(r, IPORTMXMASK(sub->swm->iport.map),
+ IPORTMXMASK_IUXCKMSK_MASK |
+ IPORTMXMASK_XCKMSK_MASK,
+ IPORTMXMASK_IUXCKMSK_OFF |
+ IPORTMXMASK_XCKMSK_OFF);
+
+ if (enable)
+ regmap_update_bits(r,
+ IPORTMXCTR2(sub->swm->iport.map),
+ IPORTMXCTR2_REQEN_MASK,
+ IPORTMXCTR2_REQEN_ENABLE);
+ else
+ regmap_update_bits(r,
+ IPORTMXCTR2(sub->swm->iport.map),
+ IPORTMXCTR2_REQEN_MASK,
+ IPORTMXCTR2_REQEN_DISABLE);
+ }
+}
+
+/**
+ * aio_if_set_param - set parameters of AIO DMA I/F block
+ * @sub: the AIO substream pointer
+ * @pass_through: Zero if sound data is LPCM, otherwise if data is not LPCM.
+ * This parameter has no effect if substream is I2S or PCM.
+ *
+ * Set suitable setting to DMA interface block of AIO to process the
+ * specified in settings.
+ *
+ * Return: Zero if successful, otherwise a negative value on error.
+ */
+int aio_if_set_param(struct uniphier_aio_sub *sub, int pass_through)
+{
+ struct regmap *r = sub->aio->chip->regmap;
+ u32 v;
+
+ if (sub->swm->dir == PORT_DIR_OUTPUT) {
+ if (pass_through)
+ v = PBOUTMXCTR0_ENDIAN_0123 |
+ PBOUTMXCTR0_MEMFMT_STREAM;
+ else
+ v = PBOUTMXCTR0_ENDIAN_3210 |
+ PBOUTMXCTR0_MEMFMT_2CH;
+
+ regmap_write(r, PBOUTMXCTR0(sub->swm->oif.map), v);
+ regmap_write(r, PBOUTMXCTR1(sub->swm->oif.map), 0);
+ } else {
+ regmap_write(r, PBINMXCTR(sub->swm->iif.map),
+ PBINMXCTR_NCONNECT_CONNECT |
+ PBINMXCTR_INOUTSEL_IN |
+ (sub->swm->iport.map << PBINMXCTR_PBINSEL_SHIFT) |
+ PBINMXCTR_ENDIAN_3210 |
+ PBINMXCTR_MEMFMT_D0);
+ }
+
+ return 0;
+}
+
+/**
+ * aio_oport_set_stream_type - set parameters of AIO playback port block
+ * @sub: the AIO substream pointer
+ * @pc: Pc type of IEC61937
+ *
+ * Set special setting to output port block of AIO to output the stream
+ * via S/PDIF.
+ *
+ * Return: Zero if successful, otherwise a negative value on error.
+ */
+int aio_oport_set_stream_type(struct uniphier_aio_sub *sub,
+ enum IEC61937_PC pc)
+{
+ struct regmap *r = sub->aio->chip->regmap;
+ u32 repet = 0, pause = OPORTMXPAUDAT_PAUSEPC_CMN;
+
+ switch (pc) {
+ case IEC61937_PC_AC3:
+ repet = OPORTMXREPET_STRLENGTH_AC3 |
+ OPORTMXREPET_PMLENGTH_AC3;
+ pause |= OPORTMXPAUDAT_PAUSEPD_AC3;
+ break;
+ case IEC61937_PC_MPA:
+ repet = OPORTMXREPET_STRLENGTH_MPA |
+ OPORTMXREPET_PMLENGTH_MPA;
+ pause |= OPORTMXPAUDAT_PAUSEPD_MPA;
+ break;
+ case IEC61937_PC_MP3:
+ repet = OPORTMXREPET_STRLENGTH_MP3 |
+ OPORTMXREPET_PMLENGTH_MP3;
+ pause |= OPORTMXPAUDAT_PAUSEPD_MP3;
+ break;
+ case IEC61937_PC_DTS1:
+ repet = OPORTMXREPET_STRLENGTH_DTS1 |
+ OPORTMXREPET_PMLENGTH_DTS1;
+ pause |= OPORTMXPAUDAT_PAUSEPD_DTS1;
+ break;
+ case IEC61937_PC_DTS2:
+ repet = OPORTMXREPET_STRLENGTH_DTS2 |
+ OPORTMXREPET_PMLENGTH_DTS2;
+ pause |= OPORTMXPAUDAT_PAUSEPD_DTS2;
+ break;
+ case IEC61937_PC_DTS3:
+ repet = OPORTMXREPET_STRLENGTH_DTS3 |
+ OPORTMXREPET_PMLENGTH_DTS3;
+ pause |= OPORTMXPAUDAT_PAUSEPD_DTS3;
+ break;
+ case IEC61937_PC_AAC:
+ repet = OPORTMXREPET_STRLENGTH_AAC |
+ OPORTMXREPET_PMLENGTH_AAC;
+ pause |= OPORTMXPAUDAT_PAUSEPD_AAC;
+ break;
+ case IEC61937_PC_PAUSE:
+ /* Do nothing */
+ break;
+ }
+
+ regmap_write(r, OPORTMXREPET(sub->swm->oport.map), repet);
+ regmap_write(r, OPORTMXPAUDAT(sub->swm->oport.map), pause);
+
+ return 0;
+}
+
+/**
+ * aio_src_reset - reset AIO SRC block
+ * @sub: the AIO substream pointer
+ *
+ * Resets the digital signal input/output port with sampling rate converter
+ * block of AIO.
+ * This function has no effect if substream is not supported rate converter.
+ */
+void aio_src_reset(struct uniphier_aio_sub *sub)
+{
+ struct regmap *r = sub->aio->chip->regmap;
+
+ if (sub->swm->dir != PORT_DIR_OUTPUT)
+ return;
+
+ regmap_write(r, AOUTSRCRSTCTR0, BIT(sub->swm->oport.map));
+ regmap_write(r, AOUTSRCRSTCTR1, BIT(sub->swm->oport.map));
+}
+
+/**
+ * aio_src_set_param - set parameters of AIO SRC block
+ * @sub: the AIO substream pointer
+ * @params: hardware parameters of ALSA
+ *
+ * Set suitable setting to input/output port with sampling rate converter
+ * block of AIO to process the specified in params.
+ * This function has no effect if substream is not supported rate converter.
+ *
+ * Return: Zero if successful, otherwise a negative value on error.
+ */
+int aio_src_set_param(struct uniphier_aio_sub *sub,
+ const struct snd_pcm_hw_params *params)
+{
+ struct regmap *r = sub->aio->chip->regmap;
+ u32 v;
+
+ if (sub->swm->dir != PORT_DIR_OUTPUT)
+ return 0;
+
+ regmap_write(r, OPORTMXSRC1CTR(sub->swm->oport.map),
+ OPORTMXSRC1CTR_THMODE_SRC |
+ OPORTMXSRC1CTR_SRCPATH_CALC |
+ OPORTMXSRC1CTR_SYNC_ASYNC |
+ OPORTMXSRC1CTR_FSIIPSEL_INNER |
+ OPORTMXSRC1CTR_FSISEL_ACLK);
+
+ switch (params_rate(params)) {
+ default:
+ case 48000:
+ v = OPORTMXRATE_I_ACLKSEL_APLLA1 |
+ OPORTMXRATE_I_MCKSEL_36 |
+ OPORTMXRATE_I_FSSEL_48;
+ break;
+ case 44100:
+ v = OPORTMXRATE_I_ACLKSEL_APLLA2 |
+ OPORTMXRATE_I_MCKSEL_33 |
+ OPORTMXRATE_I_FSSEL_44_1;
+ break;
+ case 32000:
+ v = OPORTMXRATE_I_ACLKSEL_APLLA1 |
+ OPORTMXRATE_I_MCKSEL_36 |
+ OPORTMXRATE_I_FSSEL_32;
+ break;
+ }
+
+ regmap_write(r, OPORTMXRATE_I(sub->swm->oport.map),
+ v | OPORTMXRATE_I_ACLKSRC_APLL |
+ OPORTMXRATE_I_LRCKSTP_STOP);
+ regmap_update_bits(r, OPORTMXRATE_I(sub->swm->oport.map),
+ OPORTMXRATE_I_LRCKSTP_MASK,
+ OPORTMXRATE_I_LRCKSTP_START);
+
+ return 0;
+}
+
+int aio_srcif_set_param(struct uniphier_aio_sub *sub)
+{
+ struct regmap *r = sub->aio->chip->regmap;
+
+ regmap_write(r, PBINMXCTR(sub->swm->iif.map),
+ PBINMXCTR_NCONNECT_CONNECT |
+ PBINMXCTR_INOUTSEL_OUT |
+ (sub->swm->oport.map << PBINMXCTR_PBINSEL_SHIFT) |
+ PBINMXCTR_ENDIAN_3210 |
+ PBINMXCTR_MEMFMT_D0);
+
+ return 0;
+}
+
+int aio_srcch_set_param(struct uniphier_aio_sub *sub)
+{
+ struct regmap *r = sub->aio->chip->regmap;
+
+ regmap_write(r, CDA2D_CHMXCTRL1(sub->swm->och.map),
+ CDA2D_CHMXCTRL1_INDSIZE_INFINITE);
+
+ regmap_write(r, CDA2D_CHMXSRCAMODE(sub->swm->och.map),
+ CDA2D_CHMXAMODE_ENDIAN_3210 |
+ CDA2D_CHMXAMODE_AUPDT_FIX |
+ CDA2D_CHMXAMODE_TYPE_NORMAL);
+
+ regmap_write(r, CDA2D_CHMXDSTAMODE(sub->swm->och.map),
+ CDA2D_CHMXAMODE_ENDIAN_3210 |
+ CDA2D_CHMXAMODE_AUPDT_INC |
+ CDA2D_CHMXAMODE_TYPE_RING |
+ (sub->swm->och.map << CDA2D_CHMXAMODE_RSSEL_SHIFT));
+
+ return 0;
+}
+
+void aio_srcch_set_enable(struct uniphier_aio_sub *sub, int enable)
+{
+ struct regmap *r = sub->aio->chip->regmap;
+ u32 v;
+
+ if (enable)
+ v = CDA2D_STRT0_STOP_START;
+ else
+ v = CDA2D_STRT0_STOP_STOP;
+
+ regmap_write(r, CDA2D_STRT0,
+ v | BIT(sub->swm->och.map));
+}
+
+int aiodma_ch_set_param(struct uniphier_aio_sub *sub)
+{
+ struct regmap *r = sub->aio->chip->regmap;
+ u32 v;
+
+ regmap_write(r, CDA2D_CHMXCTRL1(sub->swm->ch.map),
+ CDA2D_CHMXCTRL1_INDSIZE_INFINITE);
+
+ v = CDA2D_CHMXAMODE_ENDIAN_3210 |
+ CDA2D_CHMXAMODE_AUPDT_INC |
+ CDA2D_CHMXAMODE_TYPE_NORMAL |
+ (sub->swm->rb.map << CDA2D_CHMXAMODE_RSSEL_SHIFT);
+ if (sub->swm->dir == PORT_DIR_OUTPUT)
+ regmap_write(r, CDA2D_CHMXSRCAMODE(sub->swm->ch.map), v);
+ else
+ regmap_write(r, CDA2D_CHMXDSTAMODE(sub->swm->ch.map), v);
+
+ return 0;
+}
+
+void aiodma_ch_set_enable(struct uniphier_aio_sub *sub, int enable)
+{
+ struct regmap *r = sub->aio->chip->regmap;
+
+ if (enable) {
+ regmap_write(r, CDA2D_STRT0,
+ CDA2D_STRT0_STOP_START | BIT(sub->swm->ch.map));
+
+ regmap_update_bits(r, INTRBIM(0),
+ BIT(sub->swm->rb.map),
+ BIT(sub->swm->rb.map));
+ } else {
+ regmap_write(r, CDA2D_STRT0,
+ CDA2D_STRT0_STOP_STOP | BIT(sub->swm->ch.map));
+
+ regmap_update_bits(r, INTRBIM(0),
+ BIT(sub->swm->rb.map),
+ 0);
+ }
+}
+
+u64 aiodma_rb_get_rp(struct uniphier_aio_sub *sub)
+{
+ struct regmap *r = sub->aio->chip->regmap;
+ u32 pos_u, pos_l;
+ int i;
+
+ regmap_write(r, CDA2D_RDPTRLOAD,
+ CDA2D_RDPTRLOAD_LSFLAG_STORE | BIT(sub->swm->rb.map));
+ /* Wait for setup */
+ for (i = 0; i < 6; i++)
+ regmap_read(r, CDA2D_RBMXRDPTR(sub->swm->rb.map), &pos_l);
+
+ regmap_read(r, CDA2D_RBMXRDPTR(sub->swm->rb.map), &pos_l);
+ regmap_read(r, CDA2D_RBMXRDPTRU(sub->swm->rb.map), &pos_u);
+ pos_u = FIELD_GET(CDA2D_RBMXPTRU_PTRU_MASK, pos_u);
+
+ return ((u64)pos_u << 32) | pos_l;
+}
+
+static void aiodma_rb_set_rp(struct uniphier_aio_sub *sub, u64 pos)
+{
+ struct regmap *r = sub->aio->chip->regmap;
+ u32 tmp;
+ int i;
+
+ regmap_write(r, CDA2D_RBMXRDPTR(sub->swm->rb.map), (u32)pos);
+ regmap_write(r, CDA2D_RBMXRDPTRU(sub->swm->rb.map), (u32)(pos >> 32));
+ regmap_write(r, CDA2D_RDPTRLOAD, BIT(sub->swm->rb.map));
+ /* Wait for setup */
+ for (i = 0; i < 6; i++)
+ regmap_read(r, CDA2D_RBMXRDPTR(sub->swm->rb.map), &tmp);
+}
+
+static u64 aiodma_rb_get_wp(struct uniphier_aio_sub *sub)
+{
+ struct regmap *r = sub->aio->chip->regmap;
+ u32 pos_u, pos_l;
+ int i;
+
+ regmap_write(r, CDA2D_WRPTRLOAD,
+ CDA2D_WRPTRLOAD_LSFLAG_STORE | BIT(sub->swm->rb.map));
+ /* Wait for setup */
+ for (i = 0; i < 6; i++)
+ regmap_read(r, CDA2D_RBMXWRPTR(sub->swm->rb.map), &pos_l);
+
+ regmap_read(r, CDA2D_RBMXWRPTR(sub->swm->rb.map), &pos_l);
+ regmap_read(r, CDA2D_RBMXWRPTRU(sub->swm->rb.map), &pos_u);
+ pos_u = FIELD_GET(CDA2D_RBMXPTRU_PTRU_MASK, pos_u);
+
+ return ((u64)pos_u << 32) | pos_l;
+}
+
+static void aiodma_rb_set_wp(struct uniphier_aio_sub *sub, u64 pos)
+{
+ struct regmap *r = sub->aio->chip->regmap;
+ u32 tmp;
+ int i;
+
+ regmap_write(r, CDA2D_RBMXWRPTR(sub->swm->rb.map),
+ lower_32_bits(pos));
+ regmap_write(r, CDA2D_RBMXWRPTRU(sub->swm->rb.map),
+ upper_32_bits(pos));
+ regmap_write(r, CDA2D_WRPTRLOAD, BIT(sub->swm->rb.map));
+ /* Wait for setup */
+ for (i = 0; i < 6; i++)
+ regmap_read(r, CDA2D_RBMXWRPTR(sub->swm->rb.map), &tmp);
+}
+
+int aiodma_rb_set_threshold(struct uniphier_aio_sub *sub, u64 size, u32 th)
+{
+ struct regmap *r = sub->aio->chip->regmap;
+
+ if (size <= th)
+ return -EINVAL;
+
+ regmap_write(r, CDA2D_RBMXBTH(sub->swm->rb.map), th);
+ regmap_write(r, CDA2D_RBMXRTH(sub->swm->rb.map), th);
+
+ return 0;
+}
+
+int aiodma_rb_set_buffer(struct uniphier_aio_sub *sub, u64 start, u64 end,
+ int period)
+{
+ struct regmap *r = sub->aio->chip->regmap;
+ u64 size = end - start;
+ int ret;
+
+ if (end < start || period < 0)
+ return -EINVAL;
+
+ regmap_write(r, CDA2D_RBMXCNFG(sub->swm->rb.map), 0);
+ regmap_write(r, CDA2D_RBMXBGNADRS(sub->swm->rb.map),
+ lower_32_bits(start));
+ regmap_write(r, CDA2D_RBMXBGNADRSU(sub->swm->rb.map),
+ upper_32_bits(start));
+ regmap_write(r, CDA2D_RBMXENDADRS(sub->swm->rb.map),
+ lower_32_bits(end));
+ regmap_write(r, CDA2D_RBMXENDADRSU(sub->swm->rb.map),
+ upper_32_bits(end));
+
+ regmap_write(r, CDA2D_RBADRSLOAD, BIT(sub->swm->rb.map));
+
+ ret = aiodma_rb_set_threshold(sub, size, 2 * period);
+ if (ret)
+ return ret;
+
+ if (sub->swm->dir == PORT_DIR_OUTPUT) {
+ aiodma_rb_set_rp(sub, start);
+ aiodma_rb_set_wp(sub, end - period);
+
+ regmap_update_bits(r, CDA2D_RBMXIE(sub->swm->rb.map),
+ CDA2D_RBMXIX_SPACE,
+ CDA2D_RBMXIX_SPACE);
+ } else {
+ aiodma_rb_set_rp(sub, end - period);
+ aiodma_rb_set_wp(sub, start);
+
+ regmap_update_bits(r, CDA2D_RBMXIE(sub->swm->rb.map),
+ CDA2D_RBMXIX_REMAIN,
+ CDA2D_RBMXIX_REMAIN);
+ }
+
+ sub->threshold = 2 * period;
+ sub->rd_offs = 0;
+ sub->wr_offs = 0;
+ sub->rd_org = 0;
+ sub->wr_org = 0;
+ sub->rd_total = 0;
+ sub->wr_total = 0;
+
+ return 0;
+}
+
+void aiodma_rb_sync(struct uniphier_aio_sub *sub, u64 start, u64 size,
+ int period)
+{
+ if (sub->swm->dir == PORT_DIR_OUTPUT) {
+ sub->rd_offs = aiodma_rb_get_rp(sub) - start;
+
+ if (sub->use_mmap) {
+ sub->threshold = 2 * period;
+ aiodma_rb_set_threshold(sub, size, 2 * period);
+
+ sub->wr_offs = sub->rd_offs - period;
+ if (sub->rd_offs < period)
+ sub->wr_offs += size;
+ }
+ aiodma_rb_set_wp(sub, sub->wr_offs + start);
+ } else {
+ sub->wr_offs = aiodma_rb_get_wp(sub) - start;
+
+ if (sub->use_mmap) {
+ sub->threshold = 2 * period;
+ aiodma_rb_set_threshold(sub, size, 2 * period);
+
+ sub->rd_offs = sub->wr_offs - period;
+ if (sub->wr_offs < period)
+ sub->rd_offs += size;
+ }
+ aiodma_rb_set_rp(sub, sub->rd_offs + start);
+ }
+
+ sub->rd_total += sub->rd_offs - sub->rd_org;
+ if (sub->rd_offs < sub->rd_org)
+ sub->rd_total += size;
+ sub->wr_total += sub->wr_offs - sub->wr_org;
+ if (sub->wr_offs < sub->wr_org)
+ sub->wr_total += size;
+
+ sub->rd_org = sub->rd_offs;
+ sub->wr_org = sub->wr_offs;
+}
+
+bool aiodma_rb_is_irq(struct uniphier_aio_sub *sub)
+{
+ struct regmap *r = sub->aio->chip->regmap;
+ u32 ir;
+
+ regmap_read(r, CDA2D_RBMXIR(sub->swm->rb.map), &ir);
+
+ if (sub->swm->dir == PORT_DIR_OUTPUT)
+ return !!(ir & CDA2D_RBMXIX_SPACE);
+ else
+ return !!(ir & CDA2D_RBMXIX_REMAIN);
+}
+
+void aiodma_rb_clear_irq(struct uniphier_aio_sub *sub)
+{
+ struct regmap *r = sub->aio->chip->regmap;
+
+ if (sub->swm->dir == PORT_DIR_OUTPUT)
+ regmap_write(r, CDA2D_RBMXIR(sub->swm->rb.map),
+ CDA2D_RBMXIX_SPACE);
+ else
+ regmap_write(r, CDA2D_RBMXIR(sub->swm->rb.map),
+ CDA2D_RBMXIX_REMAIN);
+}
diff --git a/sound/soc/uniphier/aio-reg.h b/sound/soc/uniphier/aio-reg.h
new file mode 100644
index 000000000000..eaf2c65acf14
--- /dev/null
+++ b/sound/soc/uniphier/aio-reg.h
@@ -0,0 +1,462 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Socionext UniPhier AIO ALSA driver.
+ *
+ * Copyright (c) 2016-2018 Socionext Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef SND_UNIPHIER_AIO_REG_H__
+#define SND_UNIPHIER_AIO_REG_H__
+
+#include <linux/bitops.h>
+
+/* SW view */
+#define A2CHNMAPCTR0(n) (0x00000 + 0x40 * (n))
+#define A2RBNMAPCTR0(n) (0x01000 + 0x40 * (n))
+#define A2IPORTNMAPCTR0(n) (0x02000 + 0x40 * (n))
+#define A2IPORTNMAPCTR1(n) (0x02004 + 0x40 * (n))
+#define A2IIFNMAPCTR0(n) (0x03000 + 0x40 * (n))
+#define A2OPORTNMAPCTR0(n) (0x04000 + 0x40 * (n))
+#define A2OPORTNMAPCTR1(n) (0x04004 + 0x40 * (n))
+#define A2OPORTNMAPCTR2(n) (0x04008 + 0x40 * (n))
+#define A2OIFNMAPCTR0(n) (0x05000 + 0x40 * (n))
+#define A2ATNMAPCTR0(n) (0x06000 + 0x40 * (n))
+
+#define MAPCTR0_EN 0x80000000
+
+/* CTL */
+#define A2APLLCTR0 0x07000
+#define A2APLLCTR0_APLLXPOW_MASK GENMASK(3, 0)
+#define A2APLLCTR0_APLLXPOW_PWOFF (0x0 << 0)
+#define A2APLLCTR0_APLLXPOW_PWON (0xf << 0)
+#define A2APLLCTR1 0x07004
+#define A2APLLCTR1_APLLX_MASK 0x00010101
+#define A2APLLCTR1_APLLX_36MHZ 0x00000000
+#define A2APLLCTR1_APLLX_33MHZ 0x00000001
+#define A2EXMCLKSEL0 0x07030
+#define A2EXMCLKSEL0_EXMCLK_MASK GENMASK(2, 0)
+#define A2EXMCLKSEL0_EXMCLK_OUTPUT (0x0 << 0)
+#define A2EXMCLKSEL0_EXMCLK_INPUT (0x7 << 0)
+#define A2SSIFSW 0x07050
+#define A2CH22_2CTR 0x07054
+#define A2AIOINPUTSEL 0x070e0
+#define A2AIOINPUTSEL_RXSEL_PCMI1_MASK GENMASK(2, 0)
+#define A2AIOINPUTSEL_RXSEL_PCMI1_HDMIRX1 (0x2 << 0)
+#define A2AIOINPUTSEL_RXSEL_PCMI2_MASK GENMASK(6, 4)
+#define A2AIOINPUTSEL_RXSEL_PCMI2_SIF (0x7 << 4)
+#define A2AIOINPUTSEL_RXSEL_PCMI3_MASK GENMASK(10, 8)
+#define A2AIOINPUTSEL_RXSEL_PCMI3_EVEA (0x1 << 8)
+#define A2AIOINPUTSEL_RXSEL_IECI1_MASK GENMASK(14, 12)
+#define A2AIOINPUTSEL_RXSEL_IECI1_HDMIRX1 (0x2 << 12)
+#define A2AIOINPUTSEL_RXSEL_MASK (A2AIOINPUTSEL_RXSEL_PCMI1_MASK | \
+ A2AIOINPUTSEL_RXSEL_PCMI2_MASK | \
+ A2AIOINPUTSEL_RXSEL_PCMI3_MASK | \
+ A2AIOINPUTSEL_RXSEL_IECI1_HDMIRX1)
+
+/* INTC */
+#define INTCHIM(m) (0x9028 + 0x80 * (m))
+#define INTRBIM(m) (0x9030 + 0x80 * (m))
+#define INTCHID(m) (0xa028 + 0x80 * (m))
+#define INTRBID(m) (0xa030 + 0x80 * (m))
+
+/* AIN(PCMINN) */
+#define IPORTMXCTR1(n) (0x22000 + 0x400 * (n))
+#define IPORTMXCTR1_LRSEL_MASK GENMASK(11, 10)
+#define IPORTMXCTR1_LRSEL_RIGHT (0x0 << 10)
+#define IPORTMXCTR1_LRSEL_LEFT (0x1 << 10)
+#define IPORTMXCTR1_LRSEL_I2S (0x2 << 10)
+#define IPORTMXCTR1_OUTBITSEL_MASK (0x800003U << 8)
+#define IPORTMXCTR1_OUTBITSEL_32 (0x800000U << 8)
+#define IPORTMXCTR1_OUTBITSEL_24 (0x000000U << 8)
+#define IPORTMXCTR1_OUTBITSEL_20 (0x000001U << 8)
+#define IPORTMXCTR1_OUTBITSEL_16 (0x000002U << 8)
+#define IPORTMXCTR1_CHSEL_MASK GENMASK(6, 4)
+#define IPORTMXCTR1_CHSEL_ALL (0x0 << 4)
+#define IPORTMXCTR1_CHSEL_D0_D2 (0x1 << 4)
+#define IPORTMXCTR1_CHSEL_D0 (0x2 << 4)
+#define IPORTMXCTR1_CHSEL_D1 (0x3 << 4)
+#define IPORTMXCTR1_CHSEL_D2 (0x4 << 4)
+#define IPORTMXCTR1_CHSEL_DMIX (0x5 << 4)
+#define IPORTMXCTR1_FSSEL_MASK GENMASK(3, 0)
+#define IPORTMXCTR1_FSSEL_48 (0x0 << 0)
+#define IPORTMXCTR1_FSSEL_96 (0x1 << 0)
+#define IPORTMXCTR1_FSSEL_192 (0x2 << 0)
+#define IPORTMXCTR1_FSSEL_32 (0x3 << 0)
+#define IPORTMXCTR1_FSSEL_44_1 (0x4 << 0)
+#define IPORTMXCTR1_FSSEL_88_2 (0x5 << 0)
+#define IPORTMXCTR1_FSSEL_176_4 (0x6 << 0)
+#define IPORTMXCTR1_FSSEL_16 (0x8 << 0)
+#define IPORTMXCTR1_FSSEL_22_05 (0x9 << 0)
+#define IPORTMXCTR1_FSSEL_24 (0xa << 0)
+#define IPORTMXCTR1_FSSEL_8 (0xb << 0)
+#define IPORTMXCTR1_FSSEL_11_025 (0xc << 0)
+#define IPORTMXCTR1_FSSEL_12 (0xd << 0)
+#define IPORTMXCTR2(n) (0x22004 + 0x400 * (n))
+#define IPORTMXCTR2_ACLKSEL_MASK GENMASK(19, 16)
+#define IPORTMXCTR2_ACLKSEL_A1 (0x0 << 16)
+#define IPORTMXCTR2_ACLKSEL_F1 (0x1 << 16)
+#define IPORTMXCTR2_ACLKSEL_A2 (0x2 << 16)
+#define IPORTMXCTR2_ACLKSEL_F2 (0x3 << 16)
+#define IPORTMXCTR2_ACLKSEL_A2PLL (0x4 << 16)
+#define IPORTMXCTR2_ACLKSEL_RX1 (0x5 << 16)
+#define IPORTMXCTR2_ACLKSEL_RX2 (0x6 << 16)
+#define IPORTMXCTR2_MSSEL_MASK BIT(15)
+#define IPORTMXCTR2_MSSEL_SLAVE (0x0 << 15)
+#define IPORTMXCTR2_MSSEL_MASTER (0x1 << 15)
+#define IPORTMXCTR2_EXTLSIFSSEL_MASK BIT(14)
+#define IPORTMXCTR2_EXTLSIFSSEL_36 (0x0 << 14)
+#define IPORTMXCTR2_EXTLSIFSSEL_24 (0x1 << 14)
+#define IPORTMXCTR2_DACCKSEL_MASK GENMASK(9, 8)
+#define IPORTMXCTR2_DACCKSEL_1_2 (0x0 << 8)
+#define IPORTMXCTR2_DACCKSEL_1_3 (0x1 << 8)
+#define IPORTMXCTR2_DACCKSEL_1_1 (0x2 << 8)
+#define IPORTMXCTR2_DACCKSEL_2_3 (0x3 << 8)
+#define IPORTMXCTR2_REQEN_MASK BIT(0)
+#define IPORTMXCTR2_REQEN_DISABLE (0x0 << 0)
+#define IPORTMXCTR2_REQEN_ENABLE (0x1 << 0)
+#define IPORTMXCNTCTR(n) (0x22010 + 0x400 * (n))
+#define IPORTMXCOUNTER(n) (0x22014 + 0x400 * (n))
+#define IPORTMXCNTMONI(n) (0x22018 + 0x400 * (n))
+#define IPORTMXACLKSEL0EX(n) (0x22020 + 0x400 * (n))
+#define IPORTMXACLKSEL0EX_ACLKSEL0EX_MASK GENMASK(3, 0)
+#define IPORTMXACLKSEL0EX_ACLKSEL0EX_INTERNAL (0x0 << 0)
+#define IPORTMXACLKSEL0EX_ACLKSEL0EX_EXTERNAL (0xf << 0)
+#define IPORTMXEXNOE(n) (0x22070 + 0x400 * (n))
+#define IPORTMXEXNOE_PCMINOE_MASK BIT(0)
+#define IPORTMXEXNOE_PCMINOE_OUTPUT (0x0 << 0)
+#define IPORTMXEXNOE_PCMINOE_INPUT (0x1 << 0)
+#define IPORTMXMASK(n) (0x22078 + 0x400 * (n))
+#define IPORTMXMASK_IUXCKMSK_MASK GENMASK(18, 16)
+#define IPORTMXMASK_IUXCKMSK_ON (0x0 << 16)
+#define IPORTMXMASK_IUXCKMSK_OFF (0x7 << 16)
+#define IPORTMXMASK_XCKMSK_MASK GENMASK(2, 0)
+#define IPORTMXMASK_XCKMSK_ON (0x0 << 0)
+#define IPORTMXMASK_XCKMSK_OFF (0x7 << 0)
+#define IPORTMXRSTCTR(n) (0x2207c + 0x400 * (n))
+#define IPORTMXRSTCTR_RSTPI_MASK BIT(7)
+#define IPORTMXRSTCTR_RSTPI_RELEASE (0x0 << 7)
+#define IPORTMXRSTCTR_RSTPI_RESET (0x1 << 7)
+
+/* AIN(PBinMX) */
+#define PBINMXCTR(n) (0x20200 + 0x40 * (n))
+#define PBINMXCTR_NCONNECT_MASK BIT(15)
+#define PBINMXCTR_NCONNECT_CONNECT (0x0 << 15)
+#define PBINMXCTR_NCONNECT_DISCONNECT (0x1 << 15)
+#define PBINMXCTR_INOUTSEL_MASK BIT(14)
+#define PBINMXCTR_INOUTSEL_IN (0x0 << 14)
+#define PBINMXCTR_INOUTSEL_OUT (0x1 << 14)
+#define PBINMXCTR_PBINSEL_SHIFT (8)
+#define PBINMXCTR_ENDIAN_MASK GENMASK(5, 4)
+#define PBINMXCTR_ENDIAN_3210 (0x0 << 4)
+#define PBINMXCTR_ENDIAN_0123 (0x1 << 4)
+#define PBINMXCTR_ENDIAN_1032 (0x2 << 4)
+#define PBINMXCTR_ENDIAN_2301 (0x3 << 4)
+#define PBINMXCTR_MEMFMT_MASK GENMASK(3, 0)
+#define PBINMXCTR_MEMFMT_D0 (0x0 << 0)
+#define PBINMXCTR_MEMFMT_5_1CH_DMIX (0x1 << 0)
+#define PBINMXCTR_MEMFMT_6CH (0x2 << 0)
+#define PBINMXCTR_MEMFMT_4CH (0x3 << 0)
+#define PBINMXCTR_MEMFMT_DMIX (0x4 << 0)
+#define PBINMXCTR_MEMFMT_1CH (0x5 << 0)
+#define PBINMXCTR_MEMFMT_16LR (0x6 << 0)
+#define PBINMXCTR_MEMFMT_7_1CH (0x7 << 0)
+#define PBINMXCTR_MEMFMT_7_1CH_DMIX (0x8 << 0)
+#define PBINMXCTR_MEMFMT_STREAM (0xf << 0)
+#define PBINMXPAUSECTR0(n) (0x20204 + 0x40 * (n))
+#define PBINMXPAUSECTR1(n) (0x20208 + 0x40 * (n))
+
+/* AOUT */
+#define AOUTENCTR0 0x40040
+#define AOUTENCTR1 0x40044
+#define AOUTENCTR2 0x40048
+#define AOUTRSTCTR0 0x40060
+#define AOUTRSTCTR1 0x40064
+#define AOUTRSTCTR2 0x40068
+#define AOUTSRCRSTCTR0 0x400c0
+#define AOUTSRCRSTCTR1 0x400c4
+#define AOUTSRCRSTCTR2 0x400c8
+
+/* AOUT(PCMOUTN) */
+#define OPORTMXCTR1(n) (0x42000 + 0x400 * (n))
+#define OPORTMXCTR1_I2SLRSEL_MASK (0x11 << 10)
+#define OPORTMXCTR1_I2SLRSEL_RIGHT (0x00 << 10)
+#define OPORTMXCTR1_I2SLRSEL_LEFT (0x01 << 10)
+#define OPORTMXCTR1_I2SLRSEL_I2S (0x11 << 10)
+#define OPORTMXCTR1_OUTBITSEL_MASK (0x800003U << 8)
+#define OPORTMXCTR1_OUTBITSEL_32 (0x800000U << 8)
+#define OPORTMXCTR1_OUTBITSEL_24 (0x000000U << 8)
+#define OPORTMXCTR1_OUTBITSEL_20 (0x000001U << 8)
+#define OPORTMXCTR1_OUTBITSEL_16 (0x000002U << 8)
+#define OPORTMXCTR1_FSSEL_MASK GENMASK(3, 0)
+#define OPORTMXCTR1_FSSEL_48 (0x0 << 0)
+#define OPORTMXCTR1_FSSEL_96 (0x1 << 0)
+#define OPORTMXCTR1_FSSEL_192 (0x2 << 0)
+#define OPORTMXCTR1_FSSEL_32 (0x3 << 0)
+#define OPORTMXCTR1_FSSEL_44_1 (0x4 << 0)
+#define OPORTMXCTR1_FSSEL_88_2 (0x5 << 0)
+#define OPORTMXCTR1_FSSEL_176_4 (0x6 << 0)
+#define OPORTMXCTR1_FSSEL_16 (0x8 << 0)
+#define OPORTMXCTR1_FSSEL_22_05 (0x9 << 0)
+#define OPORTMXCTR1_FSSEL_24 (0xa << 0)
+#define OPORTMXCTR1_FSSEL_8 (0xb << 0)
+#define OPORTMXCTR1_FSSEL_11_025 (0xc << 0)
+#define OPORTMXCTR1_FSSEL_12 (0xd << 0)
+#define OPORTMXCTR2(n) (0x42004 + 0x400 * (n))
+#define OPORTMXCTR2_ACLKSEL_MASK GENMASK(19, 16)
+#define OPORTMXCTR2_ACLKSEL_A1 (0x0 << 16)
+#define OPORTMXCTR2_ACLKSEL_F1 (0x1 << 16)
+#define OPORTMXCTR2_ACLKSEL_A2 (0x2 << 16)
+#define OPORTMXCTR2_ACLKSEL_F2 (0x3 << 16)
+#define OPORTMXCTR2_ACLKSEL_A2PLL (0x4 << 16)
+#define OPORTMXCTR2_ACLKSEL_RX1 (0x5 << 16)
+#define OPORTMXCTR2_ACLKSEL_RX2 (0x6 << 16)
+#define OPORTMXCTR2_MSSEL_MASK BIT(15)
+#define OPORTMXCTR2_MSSEL_SLAVE (0x0 << 15)
+#define OPORTMXCTR2_MSSEL_MASTER (0x1 << 15)
+#define OPORTMXCTR2_EXTLSIFSSEL_MASK BIT(14)
+#define OPORTMXCTR2_EXTLSIFSSEL_36 (0x0 << 14)
+#define OPORTMXCTR2_EXTLSIFSSEL_24 (0x1 << 14)
+#define OPORTMXCTR2_DACCKSEL_MASK GENMASK(9, 8)
+#define OPORTMXCTR2_DACCKSEL_1_2 (0x0 << 8)
+#define OPORTMXCTR2_DACCKSEL_1_3 (0x1 << 8)
+#define OPORTMXCTR2_DACCKSEL_1_1 (0x2 << 8)
+#define OPORTMXCTR2_DACCKSEL_2_3 (0x3 << 8)
+#define OPORTMXCTR3(n) (0x42008 + 0x400 * (n))
+#define OPORTMXCTR3_IECTHUR_MASK BIT(19)
+#define OPORTMXCTR3_IECTHUR_IECOUT (0x0 << 19)
+#define OPORTMXCTR3_IECTHUR_IECIN (0x1 << 19)
+#define OPORTMXCTR3_SRCSEL_MASK GENMASK(18, 16)
+#define OPORTMXCTR3_SRCSEL_PCM (0x0 << 16)
+#define OPORTMXCTR3_SRCSEL_STREAM (0x1 << 16)
+#define OPORTMXCTR3_SRCSEL_CDDTS (0x2 << 16)
+#define OPORTMXCTR3_VALID_MASK BIT(12)
+#define OPORTMXCTR3_VALID_PCM (0x0 << 12)
+#define OPORTMXCTR3_VALID_STREAM (0x1 << 12)
+#define OPORTMXCTR3_PMSEL_MASK BIT(3)
+#define OPORTMXCTR3_PMSEL_MUTE (0x0 << 3)
+#define OPORTMXCTR3_PMSEL_PAUSE (0x1 << 3)
+#define OPORTMXCTR3_PMSW_MASK BIT(2)
+#define OPORTMXCTR3_PMSW_MUTE_OFF (0x0 << 2)
+#define OPORTMXCTR3_PMSW_MUTE_ON (0x1 << 2)
+#define OPORTMXSRC1CTR(n) (0x4200c + 0x400 * (n))
+#define OPORTMXSRC1CTR_FSIIPNUM_SHIFT (24)
+#define OPORTMXSRC1CTR_THMODE_MASK BIT(23)
+#define OPORTMXSRC1CTR_THMODE_SRC (0x0 << 23)
+#define OPORTMXSRC1CTR_THMODE_BYPASS (0x1 << 23)
+#define OPORTMXSRC1CTR_LOCK_MASK BIT(16)
+#define OPORTMXSRC1CTR_LOCK_UNLOCK (0x0 << 16)
+#define OPORTMXSRC1CTR_LOCK_LOCK (0x1 << 16)
+#define OPORTMXSRC1CTR_SRCPATH_MASK BIT(15)
+#define OPORTMXSRC1CTR_SRCPATH_BYPASS (0x0 << 15)
+#define OPORTMXSRC1CTR_SRCPATH_CALC (0x1 << 15)
+#define OPORTMXSRC1CTR_SYNC_MASK BIT(14)
+#define OPORTMXSRC1CTR_SYNC_ASYNC (0x0 << 14)
+#define OPORTMXSRC1CTR_SYNC_SYNC (0x1 << 14)
+#define OPORTMXSRC1CTR_FSOCK_MASK GENMASK(11, 10)
+#define OPORTMXSRC1CTR_FSOCK_44_1 (0x0 << 10)
+#define OPORTMXSRC1CTR_FSOCK_48 (0x1 << 10)
+#define OPORTMXSRC1CTR_FSOCK_32 (0x2 << 10)
+#define OPORTMXSRC1CTR_FSICK_MASK GENMASK(9, 8)
+#define OPORTMXSRC1CTR_FSICK_44_1 (0x0 << 8)
+#define OPORTMXSRC1CTR_FSICK_48 (0x1 << 8)
+#define OPORTMXSRC1CTR_FSICK_32 (0x2 << 8)
+#define OPORTMXSRC1CTR_FSIIPSEL_MASK GENMASK(5, 4)
+#define OPORTMXSRC1CTR_FSIIPSEL_INNER (0x0 << 4)
+#define OPORTMXSRC1CTR_FSIIPSEL_OUTER (0x1 << 4)
+#define OPORTMXSRC1CTR_FSISEL_MASK GENMASK(3, 0)
+#define OPORTMXSRC1CTR_FSISEL_ACLK (0x0 << 0)
+#define OPORTMXSRC1CTR_FSISEL_DD (0x1 << 0)
+#define OPORTMXDSDMUTEDAT(n) (0x42020 + 0x400 * (n))
+#define OPORTMXDXDFREQMODE(n) (0x42024 + 0x400 * (n))
+#define OPORTMXDSDSEL(n) (0x42028 + 0x400 * (n))
+#define OPORTMXDSDPORT(n) (0x4202c + 0x400 * (n))
+#define OPORTMXACLKSEL0EX(n) (0x42030 + 0x400 * (n))
+#define OPORTMXPATH(n) (0x42040 + 0x400 * (n))
+#define OPORTMXSYNC(n) (0x42044 + 0x400 * (n))
+#define OPORTMXREPET(n) (0x42050 + 0x400 * (n))
+#define OPORTMXREPET_STRLENGTH_AC3 SBF_(IEC61937_FRM_STR_AC3, 16)
+#define OPORTMXREPET_STRLENGTH_MPA SBF_(IEC61937_FRM_STR_MPA, 16)
+#define OPORTMXREPET_STRLENGTH_MP3 SBF_(IEC61937_FRM_STR_MP3, 16)
+#define OPORTMXREPET_STRLENGTH_DTS1 SBF_(IEC61937_FRM_STR_DTS1, 16)
+#define OPORTMXREPET_STRLENGTH_DTS2 SBF_(IEC61937_FRM_STR_DTS2, 16)
+#define OPORTMXREPET_STRLENGTH_DTS3 SBF_(IEC61937_FRM_STR_DTS3, 16)
+#define OPORTMXREPET_STRLENGTH_AAC SBF_(IEC61937_FRM_STR_AAC, 16)
+#define OPORTMXREPET_PMLENGTH_AC3 SBF_(IEC61937_FRM_PAU_AC3, 0)
+#define OPORTMXREPET_PMLENGTH_MPA SBF_(IEC61937_FRM_PAU_MPA, 0)
+#define OPORTMXREPET_PMLENGTH_MP3 SBF_(IEC61937_FRM_PAU_MP3, 0)
+#define OPORTMXREPET_PMLENGTH_DTS1 SBF_(IEC61937_FRM_PAU_DTS1, 0)
+#define OPORTMXREPET_PMLENGTH_DTS2 SBF_(IEC61937_FRM_PAU_DTS2, 0)
+#define OPORTMXREPET_PMLENGTH_DTS3 SBF_(IEC61937_FRM_PAU_DTS3, 0)
+#define OPORTMXREPET_PMLENGTH_AAC SBF_(IEC61937_FRM_PAU_AAC, 0)
+#define OPORTMXPAUDAT(n) (0x42054 + 0x400 * (n))
+#define OPORTMXPAUDAT_PAUSEPC_CMN (IEC61937_PC_PAUSE << 16)
+#define OPORTMXPAUDAT_PAUSEPD_AC3 (IEC61937_FRM_PAU_AC3 * 4)
+#define OPORTMXPAUDAT_PAUSEPD_MPA (IEC61937_FRM_PAU_MPA * 4)
+#define OPORTMXPAUDAT_PAUSEPD_MP3 (IEC61937_FRM_PAU_MP3 * 4)
+#define OPORTMXPAUDAT_PAUSEPD_DTS1 (IEC61937_FRM_PAU_DTS1 * 4)
+#define OPORTMXPAUDAT_PAUSEPD_DTS2 (IEC61937_FRM_PAU_DTS2 * 4)
+#define OPORTMXPAUDAT_PAUSEPD_DTS3 (IEC61937_FRM_PAU_DTS3 * 4)
+#define OPORTMXPAUDAT_PAUSEPD_AAC (IEC61937_FRM_PAU_AAC * 4)
+#define OPORTMXRATE_I(n) (0x420e4 + 0x400 * (n))
+#define OPORTMXRATE_I_EQU_MASK BIT(31)
+#define OPORTMXRATE_I_EQU_NOTEQUAL (0x0 << 31)
+#define OPORTMXRATE_I_EQU_EQUAL (0x1 << 31)
+#define OPORTMXRATE_I_SRCBPMD_MASK BIT(29)
+#define OPORTMXRATE_I_SRCBPMD_BYPASS (0x0 << 29)
+#define OPORTMXRATE_I_SRCBPMD_SRC (0x1 << 29)
+#define OPORTMXRATE_I_LRCKSTP_MASK BIT(24)
+#define OPORTMXRATE_I_LRCKSTP_START (0x0 << 24)
+#define OPORTMXRATE_I_LRCKSTP_STOP (0x1 << 24)
+#define OPORTMXRATE_I_ACLKSRC_MASK GENMASK(15, 12)
+#define OPORTMXRATE_I_ACLKSRC_APLL (0x0 << 12)
+#define OPORTMXRATE_I_ACLKSRC_USB (0x1 << 12)
+#define OPORTMXRATE_I_ACLKSRC_HSC (0x3 << 12)
+/* if OPORTMXRATE_I_ACLKSRC_APLL */
+#define OPORTMXRATE_I_ACLKSEL_MASK GENMASK(11, 8)
+#define OPORTMXRATE_I_ACLKSEL_APLLA1 (0x0 << 8)
+#define OPORTMXRATE_I_ACLKSEL_APLLF1 (0x1 << 8)
+#define OPORTMXRATE_I_ACLKSEL_APLLA2 (0x2 << 8)
+#define OPORTMXRATE_I_ACLKSEL_APLLF2 (0x3 << 8)
+#define OPORTMXRATE_I_ACLKSEL_APLL (0x4 << 8)
+#define OPORTMXRATE_I_ACLKSEL_HDMI1 (0x5 << 8)
+#define OPORTMXRATE_I_ACLKSEL_HDMI2 (0x6 << 8)
+#define OPORTMXRATE_I_ACLKSEL_AI1ADCCK (0xc << 8)
+#define OPORTMXRATE_I_ACLKSEL_AI2ADCCK (0xd << 8)
+#define OPORTMXRATE_I_ACLKSEL_AI3ADCCK (0xe << 8)
+#define OPORTMXRATE_I_MCKSEL_MASK GENMASK(7, 4)
+#define OPORTMXRATE_I_MCKSEL_36 (0x0 << 4)
+#define OPORTMXRATE_I_MCKSEL_33 (0x1 << 4)
+#define OPORTMXRATE_I_MCKSEL_HSC27 (0xb << 4)
+#define OPORTMXRATE_I_FSSEL_MASK GENMASK(3, 0)
+#define OPORTMXRATE_I_FSSEL_48 (0x0 << 0)
+#define OPORTMXRATE_I_FSSEL_96 (0x1 << 0)
+#define OPORTMXRATE_I_FSSEL_192 (0x2 << 0)
+#define OPORTMXRATE_I_FSSEL_32 (0x3 << 0)
+#define OPORTMXRATE_I_FSSEL_44_1 (0x4 << 0)
+#define OPORTMXRATE_I_FSSEL_88_2 (0x5 << 0)
+#define OPORTMXRATE_I_FSSEL_176_4 (0x6 << 0)
+#define OPORTMXRATE_I_FSSEL_16 (0x8 << 0)
+#define OPORTMXRATE_I_FSSEL_22_05 (0x9 << 0)
+#define OPORTMXRATE_I_FSSEL_24 (0xa << 0)
+#define OPORTMXRATE_I_FSSEL_8 (0xb << 0)
+#define OPORTMXRATE_I_FSSEL_11_025 (0xc << 0)
+#define OPORTMXRATE_I_FSSEL_12 (0xd << 0)
+#define OPORTMXEXNOE(n) (0x420f0 + 0x400 * (n))
+#define OPORTMXMASK(n) (0x420f8 + 0x400 * (n))
+#define OPORTMXMASK_IUDXMSK_MASK GENMASK(28, 24)
+#define OPORTMXMASK_IUDXMSK_ON (0x00 << 24)
+#define OPORTMXMASK_IUDXMSK_OFF (0x1f << 24)
+#define OPORTMXMASK_IUXCKMSK_MASK GENMASK(18, 16)
+#define OPORTMXMASK_IUXCKMSK_ON (0x0 << 16)
+#define OPORTMXMASK_IUXCKMSK_OFF (0x7 << 16)
+#define OPORTMXMASK_DXMSK_MASK GENMASK(12, 8)
+#define OPORTMXMASK_DXMSK_ON (0x00 << 8)
+#define OPORTMXMASK_DXMSK_OFF (0x1f << 8)
+#define OPORTMXMASK_XCKMSK_MASK GENMASK(2, 0)
+#define OPORTMXMASK_XCKMSK_ON (0x0 << 0)
+#define OPORTMXMASK_XCKMSK_OFF (0x7 << 0)
+#define OPORTMXDEBUG(n) (0x420fc + 0x400 * (n))
+#define OPORTMXT0RSTCTR(n) (0x4211c + 0x400 * (n))
+#define OPORTMXT1RSTCTR(n) (0x4213c + 0x400 * (n))
+#define OPORTMXT2RSTCTR(n) (0x4215c + 0x400 * (n))
+#define OPORTMXT3RSTCTR(n) (0x4217c + 0x400 * (n))
+#define OPORTMXT4RSTCTR(n) (0x4219c + 0x400 * (n))
+
+#define SBF_(frame, shift) (((frame) * 2 - 1) << shift)
+
+/* AOUT(PBoutMX) */
+#define PBOUTMXCTR0(n) (0x40200 + 0x40 * (n))
+#define PBOUTMXCTR0_ENDIAN_MASK GENMASK(5, 4)
+#define PBOUTMXCTR0_ENDIAN_3210 (0x0 << 4)
+#define PBOUTMXCTR0_ENDIAN_0123 (0x1 << 4)
+#define PBOUTMXCTR0_ENDIAN_1032 (0x2 << 4)
+#define PBOUTMXCTR0_ENDIAN_2301 (0x3 << 4)
+#define PBOUTMXCTR0_MEMFMT_MASK GENMASK(3, 0)
+#define PBOUTMXCTR0_MEMFMT_10CH (0x0 << 0)
+#define PBOUTMXCTR0_MEMFMT_8CH (0x1 << 0)
+#define PBOUTMXCTR0_MEMFMT_6CH (0x2 << 0)
+#define PBOUTMXCTR0_MEMFMT_4CH (0x3 << 0)
+#define PBOUTMXCTR0_MEMFMT_2CH (0x4 << 0)
+#define PBOUTMXCTR0_MEMFMT_STREAM (0x5 << 0)
+#define PBOUTMXCTR0_MEMFMT_1CH (0x6 << 0)
+#define PBOUTMXCTR1(n) (0x40204 + 0x40 * (n))
+#define PBOUTMXINTCTR(n) (0x40208 + 0x40 * (n))
+
+/* A2D(subsystem) */
+#define CDA2D_STRT0 0x10000
+#define CDA2D_STRT0_STOP_MASK BIT(31)
+#define CDA2D_STRT0_STOP_START (0x0 << 31)
+#define CDA2D_STRT0_STOP_STOP (0x1 << 31)
+#define CDA2D_STAT0 0x10020
+#define CDA2D_TEST 0x100a0
+#define CDA2D_TEST_DDR_MODE_MASK GENMASK(3, 2)
+#define CDA2D_TEST_DDR_MODE_EXTON0 (0x0 << 2)
+#define CDA2D_TEST_DDR_MODE_EXTOFF1 (0x3 << 2)
+#define CDA2D_STRTADRSLOAD 0x100b0
+
+#define CDA2D_CHMXCTRL1(n) (0x12000 + 0x80 * (n))
+#define CDA2D_CHMXCTRL1_INDSIZE_MASK BIT(0)
+#define CDA2D_CHMXCTRL1_INDSIZE_FINITE (0x0 << 0)
+#define CDA2D_CHMXCTRL1_INDSIZE_INFINITE (0x1 << 0)
+#define CDA2D_CHMXCTRL2(n) (0x12004 + 0x80 * (n))
+#define CDA2D_CHMXSRCAMODE(n) (0x12020 + 0x80 * (n))
+#define CDA2D_CHMXDSTAMODE(n) (0x12024 + 0x80 * (n))
+#define CDA2D_CHMXAMODE_ENDIAN_MASK GENMASK(17, 16)
+#define CDA2D_CHMXAMODE_ENDIAN_3210 (0x0 << 16)
+#define CDA2D_CHMXAMODE_ENDIAN_0123 (0x1 << 16)
+#define CDA2D_CHMXAMODE_ENDIAN_1032 (0x2 << 16)
+#define CDA2D_CHMXAMODE_ENDIAN_2301 (0x3 << 16)
+#define CDA2D_CHMXAMODE_RSSEL_SHIFT (8)
+#define CDA2D_CHMXAMODE_AUPDT_MASK GENMASK(5, 4)
+#define CDA2D_CHMXAMODE_AUPDT_INC (0x0 << 4)
+#define CDA2D_CHMXAMODE_AUPDT_FIX (0x2 << 4)
+#define CDA2D_CHMXAMODE_TYPE_MASK GENMASK(3, 2)
+#define CDA2D_CHMXAMODE_TYPE_NORMAL (0x0 << 2)
+#define CDA2D_CHMXAMODE_TYPE_RING (0x1 << 2)
+#define CDA2D_CHMXSRCSTRTADRS(n) (0x12030 + 0x80 * (n))
+#define CDA2D_CHMXSRCSTRTADRSU(n) (0x12034 + 0x80 * (n))
+#define CDA2D_CHMXDSTSTRTADRS(n) (0x12038 + 0x80 * (n))
+#define CDA2D_CHMXDSTSTRTADRSU(n) (0x1203c + 0x80 * (n))
+
+/* A2D(ring buffer) */
+#define CDA2D_RBFLUSH0 0x10040
+#define CDA2D_RBADRSLOAD 0x100b4
+#define CDA2D_RDPTRLOAD 0x100b8
+#define CDA2D_RDPTRLOAD_LSFLAG_LOAD (0x0 << 31)
+#define CDA2D_RDPTRLOAD_LSFLAG_STORE (0x1 << 31)
+#define CDA2D_WRPTRLOAD 0x100bc
+#define CDA2D_WRPTRLOAD_LSFLAG_LOAD (0x0 << 31)
+#define CDA2D_WRPTRLOAD_LSFLAG_STORE (0x1 << 31)
+
+#define CDA2D_RBMXBGNADRS(n) (0x14000 + 0x80 * (n))
+#define CDA2D_RBMXBGNADRSU(n) (0x14004 + 0x80 * (n))
+#define CDA2D_RBMXENDADRS(n) (0x14008 + 0x80 * (n))
+#define CDA2D_RBMXENDADRSU(n) (0x1400c + 0x80 * (n))
+#define CDA2D_RBMXBTH(n) (0x14038 + 0x80 * (n))
+#define CDA2D_RBMXRTH(n) (0x1403c + 0x80 * (n))
+#define CDA2D_RBMXRDPTR(n) (0x14020 + 0x80 * (n))
+#define CDA2D_RBMXRDPTRU(n) (0x14024 + 0x80 * (n))
+#define CDA2D_RBMXWRPTR(n) (0x14028 + 0x80 * (n))
+#define CDA2D_RBMXWRPTRU(n) (0x1402c + 0x80 * (n))
+#define CDA2D_RBMXPTRU_PTRU_MASK GENMASK(1, 0)
+#define CDA2D_RBMXCNFG(n) (0x14030 + 0x80 * (n))
+#define CDA2D_RBMXIR(n) (0x14014 + 0x80 * (n))
+#define CDA2D_RBMXIE(n) (0x14018 + 0x80 * (n))
+#define CDA2D_RBMXID(n) (0x1401c + 0x80 * (n))
+#define CDA2D_RBMXIX_SPACE BIT(3)
+#define CDA2D_RBMXIX_REMAIN BIT(4)
+
+#endif /* SND_UNIPHIER_AIO_REG_H__ */
diff --git a/sound/soc/uniphier/aio.h b/sound/soc/uniphier/aio.h
new file mode 100644
index 000000000000..774abae28028
--- /dev/null
+++ b/sound/soc/uniphier/aio.h
@@ -0,0 +1,343 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Socionext UniPhier AIO ALSA driver.
+ *
+ * Copyright (c) 2016-2018 Socionext Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef SND_UNIPHIER_AIO_H__
+#define SND_UNIPHIER_AIO_H__
+
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+
+struct platform_device;
+
+enum ID_PORT_TYPE {
+ PORT_TYPE_UNKNOWN,
+ PORT_TYPE_I2S,
+ PORT_TYPE_SPDIF,
+ PORT_TYPE_EVE,
+ PORT_TYPE_CONV,
+};
+
+enum ID_PORT_DIR {
+ PORT_DIR_OUTPUT,
+ PORT_DIR_INPUT,
+};
+
+enum IEC61937_PC {
+ IEC61937_PC_AC3 = 0x0001,
+ IEC61937_PC_PAUSE = 0x0003,
+ IEC61937_PC_MPA = 0x0004,
+ IEC61937_PC_MP3 = 0x0005,
+ IEC61937_PC_DTS1 = 0x000b,
+ IEC61937_PC_DTS2 = 0x000c,
+ IEC61937_PC_DTS3 = 0x000d,
+ IEC61937_PC_AAC = 0x0007,
+};
+
+/* IEC61937 Repetition period of data-burst in IEC60958 frames */
+#define IEC61937_FRM_STR_AC3 1536
+#define IEC61937_FRM_STR_MPA 1152
+#define IEC61937_FRM_STR_MP3 1152
+#define IEC61937_FRM_STR_DTS1 512
+#define IEC61937_FRM_STR_DTS2 1024
+#define IEC61937_FRM_STR_DTS3 2048
+#define IEC61937_FRM_STR_AAC 1024
+
+/* IEC61937 Repetition period of Pause data-burst in IEC60958 frames */
+#define IEC61937_FRM_PAU_AC3 3
+#define IEC61937_FRM_PAU_MPA 32
+#define IEC61937_FRM_PAU_MP3 32
+#define IEC61937_FRM_PAU_DTS1 3
+#define IEC61937_FRM_PAU_DTS2 3
+#define IEC61937_FRM_PAU_DTS3 3
+#define IEC61937_FRM_PAU_AAC 32
+
+/* IEC61937 Pa and Pb */
+#define IEC61937_HEADER_SIGN 0x1f4e72f8
+
+#define AUD_HW_PCMIN1 0
+#define AUD_HW_PCMIN2 1
+#define AUD_HW_PCMIN3 2
+#define AUD_HW_IECIN1 3
+#define AUD_HW_DIECIN1 4
+
+#define AUD_NAME_PCMIN1 "aio-pcmin1"
+#define AUD_NAME_PCMIN2 "aio-pcmin2"
+#define AUD_NAME_PCMIN3 "aio-pcmin3"
+#define AUD_NAME_IECIN1 "aio-iecin1"
+#define AUD_NAME_DIECIN1 "aio-diecin1"
+
+#define AUD_HW_HPCMOUT1 0
+#define AUD_HW_PCMOUT1 1
+#define AUD_HW_PCMOUT2 2
+#define AUD_HW_PCMOUT3 3
+#define AUD_HW_EPCMOUT1 4
+#define AUD_HW_EPCMOUT2 5
+#define AUD_HW_EPCMOUT3 6
+#define AUD_HW_EPCMOUT6 9
+#define AUD_HW_HIECOUT1 10
+#define AUD_HW_IECOUT1 11
+#define AUD_HW_CMASTER 31
+
+#define AUD_NAME_HPCMOUT1 "aio-hpcmout1"
+#define AUD_NAME_PCMOUT1 "aio-pcmout1"
+#define AUD_NAME_PCMOUT2 "aio-pcmout2"
+#define AUD_NAME_PCMOUT3 "aio-pcmout3"
+#define AUD_NAME_EPCMOUT1 "aio-epcmout1"
+#define AUD_NAME_EPCMOUT2 "aio-epcmout2"
+#define AUD_NAME_EPCMOUT3 "aio-epcmout3"
+#define AUD_NAME_EPCMOUT6 "aio-epcmout6"
+#define AUD_NAME_HIECOUT1 "aio-hiecout1"
+#define AUD_NAME_IECOUT1 "aio-iecout1"
+#define AUD_NAME_CMASTER "aio-cmaster"
+#define AUD_NAME_HIECCOMPOUT1 "aio-hieccompout1"
+
+#define AUD_GNAME_HDMI "aio-hdmi"
+#define AUD_GNAME_LINE "aio-line"
+#define AUD_GNAME_IEC "aio-iec"
+
+#define AUD_CLK_IO 0
+#define AUD_CLK_A1 1
+#define AUD_CLK_F1 2
+#define AUD_CLK_A2 3
+#define AUD_CLK_F2 4
+#define AUD_CLK_A 5
+#define AUD_CLK_F 6
+#define AUD_CLK_APLL 7
+#define AUD_CLK_RX0 8
+#define AUD_CLK_USB0 9
+#define AUD_CLK_HSC0 10
+
+#define AUD_PLL_A1 0
+#define AUD_PLL_F1 1
+#define AUD_PLL_A2 2
+#define AUD_PLL_F2 3
+#define AUD_PLL_APLL 4
+#define AUD_PLL_RX0 5
+#define AUD_PLL_USB0 6
+#define AUD_PLL_HSC0 7
+
+#define AUD_PLLDIV_1_2 0
+#define AUD_PLLDIV_1_3 1
+#define AUD_PLLDIV_1_1 2
+#define AUD_PLLDIV_2_3 3
+
+#define AUD_RING_SIZE (128 * 1024)
+
+#define AUD_MIN_FRAGMENT 4
+#define AUD_MAX_FRAGMENT 8
+#define AUD_MIN_FRAGMENT_SIZE (4 * 1024)
+#define AUD_MAX_FRAGMENT_SIZE (16 * 1024)
+
+/*
+ * This is a selector for virtual register map of AIO.
+ *
+ * map: Specify the index of virtual register map.
+ * hw : Specify the ID of real register map, selector uses this value.
+ * A meaning of this value depends specification of SoC.
+ */
+struct uniphier_aio_selector {
+ int map;
+ int hw;
+};
+
+/**
+ * 'SoftWare MAPping' setting of UniPhier AIO registers.
+ *
+ * We have to setup 'virtual' register maps to access 'real' registers of AIO.
+ * This feature is legacy and meaningless but AIO needs this to work.
+ *
+ * Each hardware blocks have own virtual register maps as following:
+ *
+ * Address Virtual Real
+ * ------- --------- ---------------
+ * 0x12000 DMAC map0 --> [selector] --> DMAC hardware 3
+ * 0x12080 DMAC map1 --> [selector] --> DMAC hardware 1
+ * ...
+ * 0x42000 Port map0 --> [selector] --> Port hardware 1
+ * 0x42400 Port map1 --> [selector] --> Port hardware 2
+ * ...
+ *
+ * ch : Input or output channel of DMAC
+ * rb : Ring buffer
+ * iport: PCM input port
+ * iif : Input interface
+ * oport: PCM output port
+ * oif : Output interface
+ * och : Output channel of DMAC for sampling rate converter
+ *
+ * These are examples for sound data paths:
+ *
+ * For caputure device:
+ * (outer of AIO) -> iport -> iif -> ch -> rb -> (CPU)
+ * For playback device:
+ * (CPU) -> rb -> ch -> oif -> oport -> (outer of AIO)
+ * For sampling rate converter device:
+ * (CPU) -> rb -> ch -> oif -> (HW SRC) -> iif -> och -> orb -> (CPU)
+ */
+struct uniphier_aio_swmap {
+ int type;
+ int dir;
+
+ struct uniphier_aio_selector ch;
+ struct uniphier_aio_selector rb;
+ struct uniphier_aio_selector iport;
+ struct uniphier_aio_selector iif;
+ struct uniphier_aio_selector oport;
+ struct uniphier_aio_selector oif;
+ struct uniphier_aio_selector och;
+};
+
+struct uniphier_aio_spec {
+ const char *name;
+ const char *gname;
+ struct uniphier_aio_swmap swm;
+};
+
+struct uniphier_aio_pll {
+ bool enable;
+ unsigned int freq;
+};
+
+struct uniphier_aio_chip_spec {
+ const struct uniphier_aio_spec *specs;
+ int num_specs;
+ const struct uniphier_aio_pll *plls;
+ int num_plls;
+ struct snd_soc_dai_driver *dais;
+ int num_dais;
+
+ /* DMA access mode, this is workaround for DMA hungup */
+ int addr_ext;
+};
+
+struct uniphier_aio_sub {
+ struct uniphier_aio *aio;
+
+ /* Guard sub->rd_offs and wr_offs from IRQ handler. */
+ spinlock_t lock;
+
+ const struct uniphier_aio_swmap *swm;
+ const struct uniphier_aio_spec *spec;
+
+ /* For PCM audio */
+ struct snd_pcm_substream *substream;
+ struct snd_pcm_hw_params params;
+
+ /* For compress audio */
+ struct snd_compr_stream *cstream;
+ struct snd_compr_params cparams;
+ unsigned char *compr_area;
+ dma_addr_t compr_addr;
+ size_t compr_bytes;
+ int pass_through;
+ enum IEC61937_PC iec_pc;
+ bool iec_header;
+
+ /* Both PCM and compress audio */
+ bool use_mmap;
+ int setting;
+ int running;
+ u64 rd_offs;
+ u64 wr_offs;
+ u32 threshold;
+ u64 rd_org;
+ u64 wr_org;
+ u64 rd_total;
+ u64 wr_total;
+};
+
+struct uniphier_aio {
+ struct uniphier_aio_chip *chip;
+
+ struct uniphier_aio_sub sub[2];
+
+ unsigned int fmt;
+ /* Set one of AUD_CLK_X */
+ int clk_in;
+ int clk_out;
+ /* Set one of AUD_PLL_X */
+ int pll_in;
+ int pll_out;
+ /* Set one of AUD_PLLDIV_X */
+ int plldiv;
+};
+
+struct uniphier_aio_chip {
+ struct platform_device *pdev;
+ const struct uniphier_aio_chip_spec *chip_spec;
+
+ struct uniphier_aio *aios;
+ int num_aios;
+ struct uniphier_aio_pll *plls;
+ int num_plls;
+
+ struct clk *clk;
+ struct reset_control *rst;
+ struct regmap *regmap;
+ int active;
+};
+
+static inline struct uniphier_aio *uniphier_priv(struct snd_soc_dai *dai)
+{
+ struct uniphier_aio_chip *chip = snd_soc_dai_get_drvdata(dai);
+
+ return &chip->aios[dai->id];
+}
+
+u64 aio_rb_cnt(struct uniphier_aio_sub *sub);
+u64 aio_rbt_cnt_to_end(struct uniphier_aio_sub *sub);
+u64 aio_rb_space(struct uniphier_aio_sub *sub);
+u64 aio_rb_space_to_end(struct uniphier_aio_sub *sub);
+
+int aio_chip_set_pll(struct uniphier_aio_chip *chip, int pll_id,
+ unsigned int freq);
+void aio_chip_init(struct uniphier_aio_chip *chip);
+int aio_init(struct uniphier_aio_sub *sub);
+void aio_port_reset(struct uniphier_aio_sub *sub);
+int aio_port_set_rate(struct uniphier_aio_sub *sub, int rate);
+int aio_port_set_fmt(struct uniphier_aio_sub *sub);
+int aio_port_set_clk(struct uniphier_aio_sub *sub);
+int aio_port_set_param(struct uniphier_aio_sub *sub, int pass_through,
+ const struct snd_pcm_hw_params *params);
+void aio_port_set_enable(struct uniphier_aio_sub *sub, int enable);
+int aio_if_set_param(struct uniphier_aio_sub *sub, int pass_through);
+int aio_oport_set_stream_type(struct uniphier_aio_sub *sub,
+ enum IEC61937_PC pc);
+void aio_src_reset(struct uniphier_aio_sub *sub);
+int aio_src_set_param(struct uniphier_aio_sub *sub,
+ const struct snd_pcm_hw_params *params);
+int aio_srcif_set_param(struct uniphier_aio_sub *sub);
+int aio_srcch_set_param(struct uniphier_aio_sub *sub);
+void aio_srcch_set_enable(struct uniphier_aio_sub *sub, int enable);
+
+int aiodma_ch_set_param(struct uniphier_aio_sub *sub);
+void aiodma_ch_set_enable(struct uniphier_aio_sub *sub, int enable);
+int aiodma_rb_set_threshold(struct uniphier_aio_sub *sub, u64 size, u32 th);
+int aiodma_rb_set_buffer(struct uniphier_aio_sub *sub, u64 start, u64 end,
+ int period);
+void aiodma_rb_sync(struct uniphier_aio_sub *sub, u64 start, u64 size,
+ int period);
+bool aiodma_rb_is_irq(struct uniphier_aio_sub *sub);
+void aiodma_rb_clear_irq(struct uniphier_aio_sub *sub);
+
+#endif /* SND_UNIPHIER_AIO_H__ */
--
2.16.1
More information about the linux-arm-kernel
mailing list