[PATCH 2/3] clk: exynos5433: Allow audio subsystem clock rate propagation

[Sylwester Nawrocki]

Hi Chanwoo,

On 02/09/2018 08:36 AM, Chanwoo Choi wrote:
> On 2018년 02월 08일 00:18, Sylwester Nawrocki wrote:
>> On 02/06/2018 05:06 AM, Chanwoo Choi wrote:
>>>>  drivers/clk/samsung/clk-exynos5433.c | 22 +++++++++++-----------
>>>>  1 file changed, 11 insertions(+), 11 deletions(-)
>>>>
>>>> diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
>>>> index 74b70ddab4d6..d74361736e64 100644
>>>> --- a/drivers/clk/samsung/clk-exynos5433.c
>>>> +++ b/drivers/clk/samsung/clk-exynos5433.c
>>>> @@ -246,14 +246,14 @@ static const struct samsung_fixed_rate_clock top_fixed_clks[] __initconst = {
>>>>  
>>>>  static const struct samsung_mux_clock top_mux_clks[] __initconst = {
>>>>  	/* MUX_SEL_TOP0 */
>>>> -	MUX(CLK_MOUT_AUD_PLL, "mout_aud_pll", mout_aud_pll_p, MUX_SEL_TOP0,
>>>> -			4, 1),
>>>> +	MUX_F(CLK_MOUT_AUD_PLL, "mout_aud_pll", mout_aud_pll_p, MUX_SEL_TOP0,
>>>> +	      4, 1, CLK_SET_RATE_PARENT, 0),
>>> If you add CLK_SET_RATE_PARENT to 'mout_aud_pll' and mout_aud_pll changes the rate,
>>> fout_aud_pll's rate will be changed. But, fout_aud_pll is also the parent
>>> of 'mout_aud_pll_user'. It might change the rate of children of mout_aud_pll_user.
>>> mout_aud_pll_user would not want to change the parent's clock.
>>>
>>>     fout_aud_pll                          2            2   196608009          0 0  
>>>        mout_aud_pll_user                  1            1   196608009          0 0  
>>>        mout_aud_pll                       0            0   196608009          0 0  
>> I'd say the range of changes is such that the consumers of the affected child 
>> clocks can cope and could adjust to the changed frequencies. Those consumer 
>> devices are all components/peripherals of the audio subsystem (LPASS) and, 
>
> The mout_aud_pll_user has the child clock of serial_3.
> serial_3 was used for bluetooth on TM2. If you change the aud_pll
> with CLK_SET_RATE_PARENT, it might affect the bluetooth operation.
> The bluetooth is only used for transfering the data.
> 
> Actually, I'm not sure that this patch might affect bluetooth operation or not.

You are right, the AUD PLL frequency adjustments would break the bluetooth's 
operation. I double checked and in the downstream kernel only one AUD PLL 
frequency can be set - 196608009. So I will drop this patch and add just
a single PLL_36XX_RATE() entry for that frequency, the PMS values have been
confirmed by the HW team. Only 48000/9600/192000 sample rates will then be 
supported natively and others could be through software rate conversion.

-- 
Regards,
Sylwester