[PATCH 0/3] Fix broken bananapi m2 devicetree/regulators

[Sergey Suloev]

On 02/11/2018 02:30 PM, Philipp Rossak wrote:
> Am Sonntag, den 11.02.2018, 10:55 +0300 schrieb Sergey Suloev:
>> On 02/11/2018 01:07 AM, Philipp Rossak wrote:
>>>
>>> On 10.02.2018 22:08, Sergey Suloev wrote:
>>>> On 02/11/2018 12:01 AM, Philipp Rossak wrote:
>>>>> Hey Sergey,
>>>>>
>>>>> Thanks for mentioning, but I think the problem has nothing to
>>>>> do
>>>>> with those patches. I tested them with the v4.15.0 Kernel since
>>>>> this
>>>>> is the last stable release and we are right now in the merging
>>>>> window.
>>>>>
>>>>> I tested the latest mainline, without those patches and the
>>>>> kernel
>>>>> is not booting (I can't see any uart output).
>>>>>
>>>>> Thanks,
>>>>> Philipp
>>>>>
>>>>> On 10.02.2018 14:56, Sergey Suloev wrote:
>>>>>> On 02/09/2018 08:52 PM, Philipp Rossak wrote:
>>>>>>> This patchseries fixes the bananapi m1 devicetree, to be
>>>>>>> able to
>>>>>>> boot again.
>>>>>>> The first two patches update/improve the devicetree and the
>>>>>>> last
>>>>>>> patch adds
>>>>>>> all missing regulators.
>>>>>>>
>>>>>>> Regards,
>>>>>>> Philipp
>>>>>>>
>>>>>>> Philipp Rossak (3):
>>>>>>>     arm: dts: sun6i: a31s: bpi-m2: update mmc supply nodes
>>>>>>>     arm: dts: sun6i: a31s: bpi-m2: improve pmic properties
>>>>>>>     arm: dts: sun6i: a31s: fix: bpi-m2: add missing
>>>>>>> regulators
>>>>>>>
>>>>>>>    arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 70
>>>>>>> +++++++++++++++++++++++-
>>>>>>>    1 file changed, 67 insertions(+), 3 deletions(-)
>>>>>>>
>>>>>> patches are not working
>>>>>>
>>>>>> Thanks
>>>>>>
>>>> same problem, but after applying the patches my device is till
>>>> hanging.
>>>>
>>>>
>>> Can you please share a bootlog? Here is mine [1]. As you can see
>>> I'm
>>> able to boot.
>>> I build it with this branch [2]. For testing you should replace
>>> the
>>> dtb and the uImage/zImage
>>>
>>> Philipp
>>>
>>>
>>> [1]: https://pastebin.com/mVjv3LDf
>>> [2]:
>>> https://github.com/embed-3d/linux/tree/testing/bpi-m2-regulator-tes
>>> t-2
>> My dmesg is very similar to yours unless it hangs on the last line
>> [1].
>> For this test I used kernel from tag v4.15 with no additional
>> patching.
>>
>> [1] https://pastebin.com/3a6bk5Dk
>>
>>
> For me it looks like you have a different kernel and also an different
> dtb that you patch! And you are applying also a fixup script.
> These patches should be applied on top of linux mainline.
>
> fixup script:
> Applying kernel provided DT fixup script (sun6i-a31s-fixup.scr)
>
>
> Linux versions:
> 4.15.0-00003-g1bbe5edde691   vs   4.15.0-sunxi-dirty
>
> In addition to that you are also booting into fb/hdmi.
>
> If you use my branch (uImage and dtb) and replace the current boot.cmd
> with this (to get the boot.scr you need to use mkimage) it should work:
>
> setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait
> panic=10
> load mmc 0:1 0x43000000 ${fdtfile} || load mmc 0:1 0x43000000
> boot/${fdtfile}
> load mmc 0:1 0x42000000 uImage || load mmc 0:1 0x42000000 boot/uImage
> bootm 0x42000000 - 0x43000000
>
the script is doing nothing, it is empty. The problem is related to hdmi.

The following dts code makes it happen:

&hdmi {
         status = "okay";
};