[PATCH 0/3] Fix broken bananapi m2 devicetree/regulators

Sergey Suloev ssuloev at orpaltech.com
Sat Feb 10 23:29:28 PST 2018


On 02/11/2018 01:07 AM, Philipp Rossak wrote:
>
>
> On 10.02.2018 22:08, Sergey Suloev wrote:
>> On 02/11/2018 12:01 AM, Philipp Rossak wrote:
>>> Hey Sergey,
>>>
>>> Thanks for mentioning, but I think the problem has nothing to do 
>>> with those patches. I tested them with the v4.15.0 Kernel since this 
>>> is the last stable release and we are right now in the merging window.
>>>
>>> I tested the latest mainline, without those patches and the kernel 
>>> is not booting (I can't see any uart output).
>>>
>>> Thanks,
>>> Philipp
>>>
>>> On 10.02.2018 14:56, Sergey Suloev wrote:
>>>> On 02/09/2018 08:52 PM, Philipp Rossak wrote:
>>>>> This patchseries fixes the bananapi m1 devicetree, to be able to 
>>>>> boot again.
>>>>> The first two patches update/improve the devicetree and the last 
>>>>> patch adds
>>>>> all missing regulators.
>>>>>
>>>>> Regards,
>>>>> Philipp
>>>>>
>>>>> Philipp Rossak (3):
>>>>>    arm: dts: sun6i: a31s: bpi-m2: update mmc supply nodes
>>>>>    arm: dts: sun6i: a31s: bpi-m2: improve pmic properties
>>>>>    arm: dts: sun6i: a31s: fix: bpi-m2: add missing regulators
>>>>>
>>>>>   arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 70 
>>>>> +++++++++++++++++++++++-
>>>>>   1 file changed, 67 insertions(+), 3 deletions(-)
>>>>>
>>>> patches are not working
>>>>
>>>> Thanks
>>>>
>> same problem, but after applying the patches my device is till hanging.
>>
>>
> Can you please share a bootlog? Here is mine [1]. As you can see I'm 
> able to boot.
> I build it with this branch [2]. For testing you should replace the 
> dtb and the uImage/zImage
>
> Philipp
>
>
> [1]: https://pastebin.com/mVjv3LDf
> [2]: 
> https://github.com/embed-3d/linux/tree/testing/bpi-m2-regulator-test-2

I am going to test it and come back with outcome

Thanks




More information about the linux-arm-kernel mailing list