[PATCH 1/3] drm: simple_kms_helper: Add mode_valid() callback support

[Eric Anholt]

Linus Walleij <linus.walleij at linaro.org> writes:

> The PL111 needs to filter valid modes based on memory bandwidth.
> I guess it is a pretty simple operation, so we can still claim
> the DRM KMS helper pipeline is simple after adding this (optional)
> vtable callback.
>
> Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
> ---
>  drivers/gpu/drm/drm_simple_kms_helper.c | 15 +++++++++++++++
>  include/drm/drm_simple_kms_helper.h     | 15 +++++++++++++++
>  2 files changed, 30 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_simple_kms_helper.c b/drivers/gpu/drm/drm_simple_kms_helper.c
> index dc9fd109de14..b7840cf34808 100644
> --- a/drivers/gpu/drm/drm_simple_kms_helper.c
> +++ b/drivers/gpu/drm/drm_simple_kms_helper.c
> @@ -34,6 +34,20 @@ static const struct drm_encoder_funcs drm_simple_kms_encoder_funcs = {
>  	.destroy = drm_encoder_cleanup,
>  };
>  
> +static enum drm_mode_status
> +drm_simple_kms_crtc_mode_valid(struct drm_crtc *crtc,
> +			       const struct drm_display_mode *mode)
> +{
> +	struct drm_simple_display_pipe *pipe;
> +
> +	pipe = container_of(crtc, struct drm_simple_display_pipe, crtc);
> +	if (!pipe->funcs || !pipe->funcs->mode_valid)
> +		/* Anything goes */
> +		return MODE_OK;
> +
> +	return pipe->funcs->mode_valid(crtc, mode);
> +}
> +
>  static int drm_simple_kms_crtc_check(struct drm_crtc *crtc,
>  				     struct drm_crtc_state *state)
>  {
> @@ -72,6 +86,7 @@ static void drm_simple_kms_crtc_disable(struct drm_crtc *crtc,
>  }
>  
>  static const struct drm_crtc_helper_funcs drm_simple_kms_crtc_helper_funcs = {
> +	.mode_valid = drm_simple_kms_crtc_mode_valid,
>  	.atomic_check = drm_simple_kms_crtc_check,
>  	.atomic_enable = drm_simple_kms_crtc_enable,
>  	.atomic_disable = drm_simple_kms_crtc_disable,
> diff --git a/include/drm/drm_simple_kms_helper.h b/include/drm/drm_simple_kms_helper.h
> index 6d9adbb46293..ad74cb33c539 100644
> --- a/include/drm/drm_simple_kms_helper.h
> +++ b/include/drm/drm_simple_kms_helper.h
> @@ -21,6 +21,21 @@ struct drm_simple_display_pipe;
>   *                                        display pipeline
>   */
>  struct drm_simple_display_pipe_funcs {
> +	/**
> +	 * @mode_valid:
> +	 *
> +	 * This function is called to filter out valid modes from the
> +	 * suggestions suggested by the bridge or display. This optional
> +	 * hook is passed in when initializing the pipeline.
> +	 *
> +	 * RETURNS:
> +	 *
> +	 * MODE_OK if the mode is acceptable.
> +	 * MODE_BAD if we need to try something else.
> +	 */

I don't see why MODE_BAD would be the only valid error return from this
hook.  Can we just use the same RETURNS docs as other mode_valid methods?

Other than that,

Reviewed-by: Eric Anholt <eric at anholt.net>

> +	enum drm_mode_status (*mode_valid)(struct drm_crtc *crtc,
> +					   const struct drm_display_mode *mode);
> +
>  	/**
>  	 * @enable:
>  	 *
> -- 
> 2.14.3
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 832 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180210/46e6f7bb/attachment.sig>