[PATCH 2/4] ARM: dts: tegra: use proper irq type definitions

[Marcel Ziswiler]

From: Marcel Ziswiler <marcel.ziswiler at toradex.com>

This switches a few interrupt definitions that were using either
GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW as IRQ type, which is invalid.

This is mostly a cosmetic change, that doesn't affect any driver.

Analogous to Paul's commit 38333641b6dd ("ARM: tegra: nyan: Use proper
IRQ type definitions").

Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
---

 arch/arm/boot/dts/tegra114-dalmore.dts        | 2 +-
 arch/arm/boot/dts/tegra124-jetson-tk1.dts     | 2 +-
 arch/arm/boot/dts/tegra124-venice2.dts        | 4 ++--
 arch/arm/boot/dts/tegra30-apalis.dtsi         | 4 ++--
 arch/arm/boot/dts/tegra30-beaver.dts          | 2 +-
 arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 2 +-
 6 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index acd6cf51b15b..eafff16765b4 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -780,7 +780,7 @@
 			compatible = "realtek,rt5640";
 			reg = <0x1c>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
 			realtek,ldo1-en-gpios =
 				<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index d112f85e66ed..6dbcf84dafbc 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1418,7 +1418,7 @@
 			compatible = "realtek,rt5639";
 			reg = <0x1c>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
 			realtek,ldo1-en-gpios =
 				<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 32d9079f025b..c0469ea149d2 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -613,7 +613,7 @@
 			compatible = "maxim,max98090";
 			reg = <0x10>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
 		};
 	};
 
@@ -859,7 +859,7 @@
 					reg = <0x9>;
 					interrupt-parent = <&gpio>;
 					interrupts = <TEGRA_GPIO(J, 0)
-							GPIO_ACTIVE_HIGH>;
+							IRQ_TYPE_EDGE_BOTH>;
 					ti,ac-detect-gpios = <&gpio
 							TEGRA_GPIO(J, 0)
 							GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index faa8cd2914e8..bfb7913c0657 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -657,7 +657,7 @@
 			reg = <1>;
 			clocks = <&clk16m>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_LOW>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_RISING>;
 			spi-max-frequency = <10000000>;
 		};
 	};
@@ -672,7 +672,7 @@
 			reg = <0>;
 			clocks = <&clk16m>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+			interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_RISING>;
 			spi-max-frequency = <10000000>;
 		};
 	};
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index 5331a8f7dcf8..36b85a0ab0eb 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -1762,7 +1762,7 @@
 			compatible = "realtek,rt5640";
 			reg = <0x1c>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_EDGE_FALLING>;
 			realtek,ldo1-en-gpios =
 				<&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 3c5fb2430212..b307feb7c330 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -79,7 +79,7 @@
 			reg = <0>;
 			clocks = <&clk16m>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_RISING>;
 			spi-max-frequency = <10000000>;
 		};
 		spidev0: spi at 1 {
-- 
2.14.3