[PATCH 1/7] watchdog: sama5d4: make use of timeout-secs provided in devicetree

[Marcus Folkesson]

The summary email did not make it for some reason.

However.
All these drivers is using watchdog_init_timeout() to set timeout.
If the timeout-parameter is set to an valid value, it will allways pick
that and not even consider if timeout-secs is set in devicetree.

Most of the patches will just remove the initial value for
timeout-parameter.

Some of the drivers allready has documented device-tree-bindings for
timeout-secs (but will not work), add property for those which not.

I wrote a similiar (tested) patch for imx2 and simply did the same to these drivers.
These patches is *NOT* tested, so please review extra carefully.


Taken from Documentation/watchdog/watchdog-kernel-api.txt:
	The watchdog_init_timeout function allows you to initialize the timeout field
	using the module timeout parameter or by retrieving the timeout-sec property from
	the device tree (if the module timeout parameter is invalid). Best practice is
	to set the default timeout value as timeout value in the watchdog_device and
	then use this function to set the user "preferred" timeout value.


Best regards
Marcus Folkesson