[PATCH 01/10] ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodes
Viresh Kumar
viresh.kumar at linaro.org
Fri Feb 9 00:58:01 PST 2018
The "cooling-min-level" and "cooling-max-level" properties are not
parsed by any part of the kernel currently and the max cooling state of
a CPU cooling device is found by referring to the cpufreq table instead.
Remove the unused properties from the CPU nodes.
Signed-off-by: Viresh Kumar <viresh.kumar at linaro.org>
---
arch/arm/boot/dts/exynos4210.dtsi | 2 --
arch/arm/boot/dts/exynos4412.dtsi | 2 --
arch/arm/boot/dts/exynos5250.dtsi | 2 --
arch/arm/boot/dts/exynos5420-cpus.dtsi | 16 ----------------
arch/arm/boot/dts/exynos5422-cpus.dtsi | 16 ----------------
5 files changed, 38 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index cc978cf28267..58ab34a233da 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -49,8 +49,6 @@
400000 975000
200000 950000
>;
- cooling-min-level = <4>;
- cooling-max-level = <2>;
#cooling-cells = <2>; /* min followed by max */
};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index e4ad2fc0329e..5f5cc12f2075 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -42,8 +42,6 @@
clocks = <&clock CLK_ARM_CLK>;
clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
- cooling-min-level = <13>;
- cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 56626d1a4235..bb4180ef7885 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -77,8 +77,6 @@
300000 937500
200000 925000
>;
- cooling-min-level = <15>;
- cooling-max-level = <9>;
#cooling-cells = <2>; /* min followed by max */
};
cpu at 1 {
diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi
index 123f0cef658d..a8e449471304 100644
--- a/arch/arm/boot/dts/exynos5420-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi
@@ -30,8 +30,6 @@
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
@@ -43,8 +41,6 @@
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
@@ -56,8 +52,6 @@
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
@@ -69,8 +63,6 @@
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
@@ -83,8 +75,6 @@
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
@@ -96,8 +86,6 @@
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
@@ -109,8 +97,6 @@
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
@@ -122,8 +108,6 @@
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi
index c593809c7f08..7c130a00d1a8 100644
--- a/arch/arm/boot/dts/exynos5422-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi
@@ -29,8 +29,6 @@
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
@@ -42,8 +40,6 @@
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
@@ -55,8 +51,6 @@
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
@@ -68,8 +62,6 @@
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
@@ -82,8 +74,6 @@
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <15>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
@@ -95,8 +85,6 @@
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <15>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
@@ -108,8 +96,6 @@
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <15>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
@@ -121,8 +107,6 @@
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
- cooling-min-level = <0>;
- cooling-max-level = <15>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
--
2.15.0.194.g9af6a3dea062
More information about the linux-arm-kernel
mailing list