[PATCH 02/10] ARM: dts: omap: Remove "cooling-{min|max}-level" for CPU nodes

[Viresh Kumar]

The "cooling-min-level" and "cooling-max-level" properties are not
parsed by any part of the kernel currently and the max cooling state of
a CPU cooling device is found by referring to the cpufreq table instead.

Remove the unused properties from the CPU nodes.

Signed-off-by: Viresh Kumar <viresh.kumar at linaro.org>
---
 arch/arm/boot/dts/dra7.dtsi     | 2 --
 arch/arm/boot/dts/omap443x.dtsi | 2 --
 arch/arm/boot/dts/omap4460.dtsi | 2 --
 arch/arm/boot/dts/omap5.dtsi    | 2 --
 4 files changed, 8 deletions(-)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index e4a420f16800..f4ddd86f2c77 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -92,8 +92,6 @@
 			clock-latency = <300000>; /* From omap-cpufreq driver */
 
 			/* cooling options */
-			cooling-min-level = <0>;
-			cooling-max-level = <2>;
 			#cooling-cells = <2>; /* min followed by max */
 
 			vbb-supply = <&abb_mpu>;
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
index 03c8ad91ddac..cbcdcb4e7d1c 100644
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/omap443x.dtsi
@@ -24,8 +24,6 @@
 			clock-latency = <300000>; /* From legacy driver */
 
 			/* cooling options */
-			cooling-min-level = <0>;
-			cooling-max-level = <3>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index c43f2a2d0a1e..ad97493e4e46 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -22,8 +22,6 @@
 			clock-latency = <300000>; /* From legacy driver */
 
 			/* cooling options */
-			cooling-min-level = <0>;
-			cooling-max-level = <2>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 35d4298da83d..511606c17a04 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -55,8 +55,6 @@
 			clock-latency = <300000>; /* From omap-cpufreq driver */
 
 			/* cooling options */
-			cooling-min-level = <0>;
-			cooling-max-level = <2>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 		cpu at 1 {
-- 
2.15.0.194.g9af6a3dea062