[PATCH 4/4] arm64: dts: qcom: msm8916: Add CPU frequency scaling support

[Amit Kucheria]

On Mon, Feb 5, 2018 at 8:16 PM, Georgi Djakov <georgi.djakov at linaro.org> wrote:
> Add a CPU OPP table to allow CPU frequency scaling on msm8916 platforms.
>
> Signed-off-by: Georgi Djakov <georgi.djakov at linaro.org>

For this series, please feel free to add my

Reviewed-by: Amit Kucheria <amit.kucheria at linaro.org>
Tested-by: Amit Kucheria <amit.kucheria at linaro.org>

It enables basic cpufreq on the DB410c in mainline after enabling
QCOM_APCS_IPC. I'll send out another patch to automatically select
this Kconfig option.

> ---
>  arch/arm64/boot/dts/qcom/msm8916.dtsi | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> index 4539571a36b2..e4682779eec7 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> @@ -113,6 +113,8 @@
>                         next-level-cache = <&L2_0>;
>                         enable-method = "psci";
>                         cpu-idle-states = <&CPU_SPC>;
> +                       clocks = <&apcs 0>;
> +                       operating-points-v2 = <&cpu_opp_table>;
>                 };
>
>                 CPU1: cpu at 1 {
> @@ -122,6 +124,8 @@
>                         next-level-cache = <&L2_0>;
>                         enable-method = "psci";
>                         cpu-idle-states = <&CPU_SPC>;
> +                       clocks = <&apcs 0>;
> +                       operating-points-v2 = <&cpu_opp_table>;
>                 };
>
>                 CPU2: cpu at 2 {
> @@ -131,6 +135,8 @@
>                         next-level-cache = <&L2_0>;
>                         enable-method = "psci";
>                         cpu-idle-states = <&CPU_SPC>;
> +                       clocks = <&apcs 0>;
> +                       operating-points-v2 = <&cpu_opp_table>;
>                 };
>
>                 CPU3: cpu at 3 {
> @@ -140,6 +146,8 @@
>                         next-level-cache = <&L2_0>;
>                         enable-method = "psci";
>                         cpu-idle-states = <&CPU_SPC>;
> +                       clocks = <&apcs 0>;
> +                       operating-points-v2 = <&cpu_opp_table>;
>                 };
>
>                 L2_0: l2-cache {
> @@ -212,6 +220,24 @@
>
>         };
>
> +       cpu_opp_table: cpu_opp_table {
> +               compatible = "operating-points-v2";
> +               opp-shared;
> +
> +               opp-200000000 {
> +                       opp-hz = /bits/ 64 <200000000>;
> +               };
> +               opp-400000000 {
> +                       opp-hz = /bits/ 64 <400000000>;
> +               };
> +               opp-800000000 {
> +                       opp-hz = /bits/ 64 <800000000>;
> +               };
> +               opp-998400000 {
> +                       opp-hz = /bits/ 64 <998400000>;
> +               };
> +       };
> +
>         gpu_opp_table: opp_table {
>                 compatible = "operating-points-v2";
>