[PATCH v3 0/4] gpio: driver for the RPi3 GPIO expander

[Stefan Wahren]

Am 07.02.2018 um 10:38 schrieb Baruch Siach:
> Hi Stefan,
>
> On Wed, Feb 07, 2018 at 10:33:24AM +0100, Stefan Wahren wrote:
>> Am 06.02.2018 um 17:27 schrieb Baruch Siach:
>>> On Tue, Feb 06, 2018 at 02:42:48PM +0100, Linus Walleij wrote:
>>>> On Tue, Jan 16, 2018 at 1:45 PM, Baruch Siach <baruch at tkos.co.il> wrote:
>>>>
>>>>> The Raspberry Pi 3 has a GPIO expander that controls, among others, the
>>>>> activity LED, and the camera connector GPIOs. The GPIO expander on an I2C bus
>>>>> that is not directly controlled from the ARM core. The VC4 firmware controls
>>>>> the I2C bus, and allows the ARM core to set/get GPIO settings over its mailbox
>>>>> interface.
>>>>>
>>>>> This series adds support for the RPi3 expander.
>>>>>
>>>>> The driver is ported from the downstream kernel at
>>>>> https://github.com/raspberrypi/linux/, branch rpi-4.9.y.
>>>>>
>>>>> Changes in v3:
>>>>>
>>>>>    * Kconfig tweaks
>>>>>    * Check rpi_exp_gpio_get_polarity() return value
>>>>>    * Redundant header removal
>>>>>    * Redundant platform_set_drvdata() call removal
>>>>>    * Small coding style changes
>>>> All is looking pretty good. I see Rob had some last minute comments,
>>>> but please rebase and repost post v4.16-rc1 so we can get this merged,
>>>> we need to get this upstream.
>>> I was about to send v4 when I saw your email. I based v4 on current LinusT's
>>> tree as of e237f98a9c. I guess that affected files will not change before
>>> v4.16-rc1, but I can wait a few more days for -rc1.
>> please also address the owner issue in the driver, which was reported by
>> kbuild test robot.
> I removed the .owner platform_driver field set from v4. The owner field in
> gpio_chip is still set.

perfect

>
> baruch
>