[PATCH v6 15/15] dt-bindings: cpufreq: Document operating-points-v2-krait-cpu

[Viresh Kumar]

On 06-02-18, 09:38, Sricharan R wrote:
> In Certain QCOM SoCs like ipq8064, apq8064, msm8960, msm8974
> that has KRAIT processors the voltage/current value of each OPP
> varies based on the silicon variant in use.
> operating-points-v2-krait-cpu specifies the phandle to nvmem efuse cells
> and the operating-points-v2 table for each opp. The qcom-cpufreq driver
> reads the efuse value from the SoC to provide the required information
> that is used to determine the voltage and current value for each OPP of
> operating-points-v2 table when it is parsed by the OPP framework.
> 
> Signed-off-by: Sricharan R <sricharan at codeaurora.org>
> ---
>  .../devicetree/bindings/cpufreq/krait-cpufreq.txt  | 363 +++++++++++++++++++++
>  1 file changed, 363 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/cpufreq/krait-cpufreq.txt

You can add my Ack if Rob also finds everything to be fine here.

Acked-by: Viresh Kumar <viresh.kumar at linaro.org>

-- 
viresh