[PATCH 3/3] clk: exynos5433: Add CLK_IGNORE_UNUSED flag to sclk_ioclk_i2s1_bclk

[Chanwoo Choi]

On 2018년 02월 05일 23:22, Sylwester Nawrocki wrote:
> The sclk_ioclk_i2s1_bclk clock is not currently handled by any driver
> and disabling this clock by the clk core prevents proper operation
> of the I2S1 block. CLK_IGNORE_UNUSED flag is added as a temporary fix.
> 
> Signed-off-by: Sylwester Nawrocki <s.nawrocki at samsung.com>
> ---
>  drivers/clk/samsung/clk-exynos5433.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
> index d74361736e64..15177f74e125 100644
> --- a/drivers/clk/samsung/clk-exynos5433.c
> +++ b/drivers/clk/samsung/clk-exynos5433.c
> @@ -1680,7 +1680,7 @@ static const struct samsung_gate_clock peric_gate_clks[] __initconst = {
>  			ENABLE_SCLK_PERIC, 11, CLK_SET_RATE_PARENT, 0),
>  	GATE(CLK_SCLK_IOCLK_I2S1_BCLK, "sclk_ioclk_i2s1_bclk",
>  			"ioclk_i2s1_bclk_in", ENABLE_SCLK_PERIC, 10,
> -			CLK_SET_RATE_PARENT, 0),
> +			CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0),
>  	GATE(CLK_SCLK_SPDIF, "sclk_spdif", "sclk_spdif_peric",
>  			ENABLE_SCLK_PERIC, 8, CLK_SET_RATE_PARENT, 0),
>  	GATE(CLK_SCLK_PCM1, "sclk_pcm1", "sclk_pcm1_peric",
> 

If any device driver handles the sclk_ioclk_i2s1_bclk on later,
CLK_IGNORE_UNUSED will be ignored. Looks good to me.

Reviewed-by: Chanwoo Choi <cw00.choi at samsung.com>

-- 
Best Regards,
Chanwoo Choi
Samsung Electronics