[v2] ARM: dts: imx: Add support for Advantech DMS-BA16

[Yung-Ching LIN]

Hi Fabio,

Thank you for your comments.
Will provide the v3 for the fixes

On Mon, Feb 5, 2018 at 4:13 PM, Fabio Estevam <festevam at gmail.com> wrote:
> Hi Ken,
>
> On Mon, Feb 5, 2018 at 10:05 PM, Ken Lin <yungching0725 at gmail.com> wrote:
>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index ade7a38543dc..585c3da4a47a 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -435,6 +435,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
>>         imx6q-dfi-fs700-m60.dtb \
>>         imx6q-display5-tianma-tm070-1280x768.dtb \
>>         imx6q-dmo-edmqmx6.dtb \
>> +       imx6q-dms-ba16.dtb \
>>         imx6q-evi.dtb \
>>         imx6q-gk802.dtb \
>>         imx6q-gw51xx.dtb \
>> diff --git a/arch/arm/boot/dts/imx6q-dms-ba16.dts b/arch/arm/boot/dts/imx6q-dms-ba16.dts
>> new file mode 100644
>> index 000000000000..055b88a6096d
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/imx6q-dms-ba16.dts
>> @@ -0,0 +1,146 @@
>> +/*
>> + * Copyright 2018 Advantech Corporation
>> + *
>> + * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>
> You should put the SPDX line as the first line and it should start with //:
>
> // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>
>> + */
>> +
>> +
>
> No need for two blank lines. One is enough.
>
>> +/dts-v1/;
>> +
> ...
>
>> +&ecspi5 {
>> +       num-cs = <1>;
>
> You can remove this property.
>
>
>> +       cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
>> +       pinctrl-names = "default";
>> +       pinctrl-0 = <&pinctrl_ecspi5>;
>> +       status = "okay";
>> +
>> +       m25_eeprom: m25p80 at 0 {
>> +               compatible = "atmel,at25";
>
> According to Documentation/devicetree/bindings/eeprom/at25.txt this
> should have the following format:
>
> compatible : Should be "<vendor>,<type>", and generic value "atmel,at25".