[PATCH v3 08/18] arm/arm64: KVM: Add PSCI version selection API
Andrew Jones
drjones at redhat.com
Mon Feb 5 01:58:23 PST 2018
On Mon, Feb 05, 2018 at 09:24:33AM +0000, Marc Zyngier wrote:
> On 04/02/18 12:37, Christoffer Dall wrote:
> > On Sat, Feb 03, 2018 at 11:59:32AM +0000, Marc Zyngier wrote:
> >> On Fri, 2 Feb 2018 21:17:06 +0100
> >> Andrew Jones <drjones at redhat.com> wrote:
> >>
> >>> On Thu, Feb 01, 2018 at 11:46:47AM +0000, Marc Zyngier wrote:
> >>>> Although we've implemented PSCI 1.0 and 1.1, nothing can select them
> >>>> Since all the new PSCI versions are backward compatible, we decide to
> >>>> default to the latest version of the PSCI implementation. This is no
> >>>> different from doing a firmware upgrade on KVM.
> >>>>
> >>>> But in order to give a chance to hypothetical badly implemented guests
> >>>> that would have a fit by discovering something other than PSCI 0.2,
> >>>> let's provide a new API that allows userspace to pick one particular
> >>>> version of the API.
> >>>>
> >>>> This is implemented as a new class of "firmware" registers, where
> >>>> we expose the PSCI version. This allows the PSCI version to be
> >>>> save/restored as part of a guest migration, and also set to
> >>>> any supported version if the guest requires it.
> >>>>
> >>>> Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
> >>>> ---
> >>>> Documentation/virtual/kvm/api.txt | 3 +-
> >>>> Documentation/virtual/kvm/arm/psci.txt | 30 +++++++++++++++
> >>>> arch/arm/include/asm/kvm_host.h | 3 ++
> >>>> arch/arm/include/uapi/asm/kvm.h | 6 +++
> >>>> arch/arm/kvm/guest.c | 13 +++++++
> >>>> arch/arm64/include/asm/kvm_host.h | 3 ++
> >>>> arch/arm64/include/uapi/asm/kvm.h | 6 +++
> >>>> arch/arm64/kvm/guest.c | 14 ++++++-
> >>>> include/kvm/arm_psci.h | 9 +++++
> >>>> virt/kvm/arm/psci.c | 68 +++++++++++++++++++++++++++++++++-
> >>>> 10 files changed, 151 insertions(+), 4 deletions(-)
> >>>> create mode 100644 Documentation/virtual/kvm/arm/psci.txt
> >>>>
> >>>> diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
> >>>> index 57d3ee9e4bde..334905202141 100644
> >>>> --- a/Documentation/virtual/kvm/api.txt
> >>>> +++ b/Documentation/virtual/kvm/api.txt
> >>>> @@ -2493,7 +2493,8 @@ Possible features:
> >>>> and execute guest code when KVM_RUN is called.
> >>>> - KVM_ARM_VCPU_EL1_32BIT: Starts the CPU in a 32bit mode.
> >>>> Depends on KVM_CAP_ARM_EL1_32BIT (arm64 only).
> >>>> - - KVM_ARM_VCPU_PSCI_0_2: Emulate PSCI v0.2 for the CPU.
> >>>> + - KVM_ARM_VCPU_PSCI_0_2: Emulate PSCI v0.2 (or a future revision
> >>>> + backward compatible with v0.2) for the CPU.
> >>>> Depends on KVM_CAP_ARM_PSCI_0_2.
> >>>> - KVM_ARM_VCPU_PMU_V3: Emulate PMUv3 for the CPU.
> >>>> Depends on KVM_CAP_ARM_PMU_V3.
> >>>> diff --git a/Documentation/virtual/kvm/arm/psci.txt b/Documentation/virtual/kvm/arm/psci.txt
> >>>> new file mode 100644
> >>>> index 000000000000..aafdab887b04
> >>>> --- /dev/null
> >>>> +++ b/Documentation/virtual/kvm/arm/psci.txt
> >>>> @@ -0,0 +1,30 @@
> >>>> +KVM implements the PSCI (Power State Coordination Interface)
> >>>> +specification in order to provide services such as CPU on/off, reset
> >>>> +and power-off to the guest.
> >>>> +
> >>>> +The PSCI specification is regularly updated to provide new features,
> >>>> +and KVM implements these updates if they make sense from a virtualization
> >>>> +point of view.
> >>>> +
> >>>> +This means that a guest booted on two different versions of KVM can
> >>>> +observe two different "firmware" revisions. This could cause issues if
> >>>> +a given guest is tied to a particular PSCI revision (unlikely), or if
> >>>> +a migration causes a different PSCI version to be exposed out of the
> >>>> +blue to an unsuspecting guest.
> >>>> +
> >>>> +In order to remedy this situation, KVM exposes a set of "firmware
> >>>> +pseudo-registers" that can be manipulated using the GET/SET_ONE_REG
> >>>> +interface. These registers can be saved/restored by userspace, and set
> >>>> +to a convenient value if required.
> >>>> +
> >>>> +The following register is defined:
> >>>> +
> >>>> +* KVM_REG_ARM_PSCI_VERSION:
> >>>> +
> >>>> + - Only valid if the vcpu has the KVM_ARM_VCPU_PSCI_0_2 feature set
> >>>> + (and thus has already been initialized)
> >>>> + - Returns the current PSCI version on GET_ONE_REG (defaulting to the
> >>>> + highest PSCI version implemented by KVM and compatible with v0.2)
> >>>> + - Allows any PSCI version implemented by KVM and compatible with
> >>>> + v0.2 to be set with SET_ONE_REG
> >>>> + - Affects the whole VM (even if the register view is per-vcpu)
> >>>
> >>
> >> Hi Drew,
> >>
> >> Thanks for looking into this, and for the exhaustive data.
> >>
> >>>
> >>> I've put some more thought and experimentation into this. I think we
> >>> should change to a vcpu feature bit. The feature bit would be used to
> >>> force compat mode, v0.2, so KVM would still enable the new PSCI
> >>> version by default. Below are two tables describing why I think we
> >>> should switch to something other than a new sysreg, and below those
> >>> tables are notes as to why I think we should use a vcpu feature. The
> >>> asterisks in the tables point out behaviors that aren't what we want.
> >>> While both tables have an asterisk, the sysreg approach's issue is
> >>> bug. The vcpu feature approach's issue is risk incurred from an
> >>> unsupported migration, albeit one that is hard to detect without a
> >>> new machine type.
> >>>
> >>> +-----------------------------------------------------------------------+
> >>> | sysreg approach |
> >>> +------------------+-----------+-------+--------------------------------+
> >>> | migration | userspace | works | notes |
> >>> | | change | | |
> >>> +------------------+-----------+-------+--------------------------------+
> >>> | new -> new | NO | YES | Expected |
> >>> +------------------+-----------+-------+--------------------------------+
> >>> | old -> new | NO | YES | PSCI 1.0 is backward compatible|
> >>> +------------------+-----------+-------+--------------------------------+
> >>> | new -> old | NO | NO | Migration fails due to the new |
> >>> | | | | sysreg. Migration shouldn't |
> >>> | | | | have been attempted, but no |
> >>> | | | | way to know without a new |
> >>> | | | | machine type. |
> >>> +------------------+-----------+-------+--------------------------------+
> >>> | compat -> old | YES | NO* | Even when setting PSCI version |
> >>> | | | | to 0.2, we add a new sysreg, |
> >>> | | | | so migration will still fail. |
> >>> +------------------+-----------+-------+--------------------------------+
> >>> | old -> compat | YES | YES | It's OK for the destination to |
> >>> | | | | support more sysregs than the |
> >>> | | | | source sends. |
> >>> +------------------+-----------+-------+--------------------------------+
> >>>
> >>>
> >>> +-----------------------------------------------------------------------+
> >>> | vcpu feature approach |
> >>> +------------------+-----------+-------+--------------------------------+
> >>> | migration | userspace | works | notes |
> >>> | | change | | |
> >>> +------------------+-----------+-------+--------------------------------+
> >>> | new -> new | NO | YES | Expected |
> >>> +------------------+-----------+-------+--------------------------------+
> >>> | old -> new | NO | YES | PSCI 1.0 is backward compatible|
> >>> +------------------+-----------+-------+--------------------------------+
> >>> | new -> old | NO | YES* | Migrates, but it's not safe |
> >>> | | | | for the guest kernel, and no |
> >>> | | | | way to know without a new |
> >>> | | | | machine type. |
> >>> +------------------+-----------+-------+--------------------------------+
> >>> | compat -> old | YES | YES | Expected |
> >>> +------------------+-----------+-------+--------------------------------+
> >>> | old -> compat | YES | YES | Expected |
> >>> +------------------+-----------+-------+--------------------------------+
> >>>
> >>>
> >>> Notes as to why the vcpu feature approach was selected:
> >>>
> >>> 1) While this is VM state, and thus a VM control would be a more natural
> >>> fit, a new vcpu feature bit would be much less new code. We also
> >>> already have a PSCI vcpu feature bit, so a new one will actually fit
> >>> quite well.
> >>>
> >>> 2) No new state needs to be migrated, as we already migrate the feature
> >>> bitmap. Unlike, KVM, QEMU doesn't track the max number of features,
> >>> so bumping it one more in KVM doesn't require a QEMU change.
> >>>
> >>>
> >>> If we switch to a vcpu feature bit, then I think this patch can be
> >>> replaced with something like this
> >>
> >> A couple of remarks:
> >>
> >> - My worry with this feature bit is that it is a point fix, and it
> >> doesn't scale. Come PSCI 1.2 and WORKAROUND_2, what do we do? Add
> >> another feature bit that says "force to 1.0"? I'd really like
> >> something we can live with in the long run, and "KVM as firmware"
> >> needs to be able to evolve without requiring a new userspace
> >> interface each time we rev it.
> >>
> >> - The "compat->old" entry in your sysreg table is not quite fair. In
> >> the feature table, you teach userspace about the new feature bit. You
> >> could just as well teach userspace about the new sysreg. Yes, things
> >> may be different in QEMU, but that's not what we're talking about
> >> here.
> >>
> >> - Allowing a guest to migrate in an unsafe way seems worse than failing
> >> a migration unexpectedly. Or at least not any better.
> >>
> >> To be clear: I'm not dismissing the idea at all, but I want to make sure
> >> we're not cornering ourselves into an uncomfortable place.
> >>
> >> Christoffer, Peter, what are your thoughts on this?
> >>
> >
> > Taking a step back, the only reasons why this patch isn't simply
> > enabling PSCI v1.0 by default (without any selection method) are that we
> > (1) want to support guests that complain about PSCI_VERSION != 0.2
> > (which isn't completely outside the realm of a reasonable implementation
> > if you read the description of PSCI_VERSION in the 0.2 spec) and (2) to
> > provide migration support for guests that call
> > PSCI_1_0_FN_PSCI_FEATURES.
> >
> > If we ignore (1) because we don't know of any guests where this is an
> > issue, then it's all about (2), migration from "new -> old".
> >
> > As far as I can tell, the use case we are worried about here is updating
> > the kernel (and not QEMU) on half of your data center and then trying to
> > migrate from the upgraded kernel machine to a legacy (and potentially
> > variant 2 vulnerable) machine. For this specific move from PSCI 0.2 to
> > 1.0 with the included mitigation, I don't really think this is an
> > important use case to support.
>
> I'm not so sure. Promising mitigation to a guest, and then seeing that
> mitigation being silently taken away because we've allowed it to migrate
> seem bad to me.
>
> > In terms of the more general approach to "KVM firmware upgrades" and
> > migration, I think something like the proposed FW register interface
> > here should work, but I'm concerned about the lack of opportunity from
> > userspace to predict a migration failure. But I don't understand why
>
> Userspace could predict some of the failure cases, if only by checking
> that all registers can be restored in a new guest. I'm not sure how
> viable this is in a data centre type of environment.
>
> > this requires a new machine type? Why can't we simply provide a KVM
> > capability that libvirt etc. can query for?
> >
> > Also, is it generally true that we can't expose any additional system
> > registers from KVM without breaking migration and we don't have any
> > method to deal with that in userspace and upper layers? If that's true,
>
> It is my understanding that each time we add a new sysreg to KVM,
> migration in QEMU breaks in the new->old direction.
>
> > that's a bigger problem in general and something we should work on
> > trying to solve. If it's not true, then there should be some method to
> > deal with the FW register already (like capabilities).
> >
> > Given the urgency of adding mitigation towards variant 2 which is the
> > driver for this work, I think we should drop the compat functionality in
> > this series and work this out later on if needed. I think we can just
> > tweak the previous patch to enable PSCI 1.0 by default and drop this
> > patch for the current merge window.
>
> I'd be fine with that, as long as we have a clear agreement on the
> impact of such a move.
Yeah, that's what I was trying to figure out with my fancy tables. I might
be coming around more to your approach now, though. Ensuring the new->old
migration fails is a nice feature of this series. It would be good if
we could preserve that behavior without committing to a new userspace
interface, but I'm not sure how. Maybe I should just apologize for the
noise, and this patch be left as is...
Thanks,
drew
More information about the linux-arm-kernel
mailing list