[PATCH 2/2] arm64: dts: fsl: imx8mq-evk: enable watchdog

[Baruch Siach]

The external nWDOG signal connects to the EVK board reset circuit.

Tested on the i.MX8MQ EVK rev B3.

Signed-off-by: Baruch Siach <baruch at tkos.co.il>
---
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index c0e5ee5d6243..757ba226a2fc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -170,6 +170,13 @@
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
 &iomuxc {
 	pinctrl_fec1_mdc: fec1mdcgrp {
 		pinmux = <MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC>;
@@ -402,4 +409,12 @@
 		bias-pull-up;
 		input-schmitt-enable;
 	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B>;
+		drive-strength = <6>;
+		slew-rate = <0>;
+		bias-pull-up;
+		input-schmitt-enable;
+	};
 };
-- 
2.15.1