[PATCH] ARM: dts: imx6ull: add Toradex Colibri iMX6ULL support

Shawn Guo shawnguo at kernel.org
Sun Feb 4 22:06:00 PST 2018


On Fri, Jan 19, 2018 at 01:11:25AM +0100, Stefan Agner wrote:
> Add support for the Computer on Module Colibri iMX6ULL and its
> Bluetooth/Wifi variant along with the development/evaluation carrier
> board device trees. Follow the usual hierarchic include model,
> maintaining shared configuration in imx6ull-colibri.dtsi and
> imx6ull-colibri-eval-v3.dtsi respectively.
> 
> Signed-off-by: Stefan Agner <stefan at agner.ch>
> ---
> This depends on the following patchsets work:
> - https://lkml.org/lkml/2018/1/6/129 (applied)
> - https://lkml.org/lkml/2018/1/10/998 (pending, required)
> - https://lkml.org/lkml/2018/1/18/850 (only for highest CPU frequency)
> 
> --
> Stefan
> 
>  arch/arm/boot/dts/Makefile                         |   4 +-
>  arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts      |  14 +
>  arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi     | 158 ++++++
>  arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi     |  24 +
>  arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts |  14 +
>  arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi        |  70 +++
>  arch/arm/boot/dts/imx6ull-colibri.dtsi             | 554 +++++++++++++++++++++
>  7 files changed, 837 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts
>  create mode 100644 arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
>  create mode 100644 arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
>  create mode 100644 arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts
>  create mode 100644 arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
>  create mode 100644 arch/arm/boot/dts/imx6ull-colibri.dtsi
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 7fc7bcefc3a0..6411b3069e8d 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -525,7 +525,9 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
>  	imx6ul-tx6ul-0010.dtb \
>  	imx6ul-tx6ul-0011.dtb \
>  	imx6ul-tx6ul-mainboard.dtb \
> -	imx6ull-14x14-evk.dtb
> +	imx6ull-14x14-evk.dtb \
> +	imx6ull-colibri-eval-v3.dtb \
> +	imx6ull-colibri-wifi-eval-v3.dtb
>  dtb-$(CONFIG_SOC_IMX7D) += \
>  	imx7d-cl-som-imx7.dtb \
>  	imx7d-colibri-emmc-eval-v3.dtb \
> diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts
> new file mode 100644
> index 000000000000..08669a18349e
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts
> @@ -0,0 +1,14 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2018 Toradex AG
> + */
> +
> +/dts-v1/;
> +
> +#include "imx6ull-colibri-nonwifi.dtsi"
> +#include "imx6ull-colibri-eval-v3.dtsi"
> +
> +/ {
> +	model = "Toradex Colibri iMX6ULL 256MB on Colibri Evaluation Board V3";
> +	compatible = "toradex,colibri-imx6ull-eval", "fsl,imx6ull";
> +};
> diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
> new file mode 100644
> index 000000000000..01acc0238e5e
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
> @@ -0,0 +1,158 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2017 Toradex AG
> + */
> +
> +/ {
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	/* fixed crystal dedicated to mcp2515 */
> +	clk16m: clk16m {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <16000000>;
> +	};
> +
> +	panel: panel {
> +		compatible = "edt,et057090dhu";
> +		backlight = <&bl>;
> +		power-supply = <&reg_3v3>;
> +
> +		port {
> +			panel_in: endpoint {
> +				remote-endpoint = <&lcdif_out>;
> +			};
> +		};
> +	};
> +
> +	reg_3v3: regulator-3v3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "3.3V";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +
> +	reg_5v0: regulator-5v0 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "5V";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +	};
> +
> +	reg_usbh_vbus: regulator-usbh-vbus {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_usbh_reg>;
> +		regulator-name = "VCC_USB[1-4]";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
> +		vin-supply = <&reg_5v0>;
> +	};
> +};
> +
> +&bl {
> +	brightness-levels = <0 4 8 16 32 64 128 255>;
> +	default-brightness-level = <6>;
> +	power-supply = <&reg_3v3>;
> +	pwms = <&pwm4 0 5000000 1>;
> +

Drop the newline.

> +	status = "okay";
> +};
> +
> +&adc1 {

'adc1' should go before 'bl'.

> +	status = "okay";
> +};
> +
> +&ecspi1 {
> +	status = "okay";
> +
> +	mcp2515: can at 0 {
> +		compatible = "microchip,mcp2515";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_can_int>;
> +		reg = <0>;
> +		clocks = <&clk16m>;
> +		interrupt-parent = <&gpio2>;
> +		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
> +		spi-max-frequency = <10000000>;
> +		vdd-supply = <&reg_3v3>;
> +		xceiver-supply = <&reg_5v0>;
> +		status = "okay";
> +	};
> +};
> +
> +&i2c1 {
> +	status = "okay";
> +
> +	/* M41T0M6 real time clock on carrier board */
> +	rtc: m41t0m6 at 68 {

m41t0m6: rtc

> +		compatible = "st,m41t0";
> +		reg = <0x68>;
> +	};
> +};
> +
> +&lcdif {
> +	status = "okay";
> +
> +	port {
> +		lcdif_out: endpoint {
> +			remote-endpoint = <&panel_in>;
> +		};
> +	};
> +};
> +
> +/* PWM <A> */
> +&pwm4 {
> +	status = "okay";
> +};
> +
> +/* PWM <B> */
> +&pwm5 {
> +	status = "okay";
> +};
> +
> +/* PWM <C> */
> +&pwm6 {
> +	status = "okay";
> +};
> +
> +/* PWM <D> */
> +&pwm7 {
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	status = "okay";
> +};
> +
> +&uart5 {
> +	status = "okay";
> +};
> +
> +&usbotg1 {
> +	status = "okay";
> +};
> +
> +&usbotg2 {
> +	vbus-supply = <&reg_usbh_vbus>;
> +	status = "okay";
> +};
> +
> +&usdhc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>;
> +	no-1-8-v;
> +	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
> +	disable-wp;
> +	enable-sdio-wakeup;

wakeup-source

> +	keep-power-in-suspend;
> +	status = "okay";

Move 'status' to bottom of property list.

> +	vmmc-supply = <&reg_3v3>;
> +};
> diff --git a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
> new file mode 100644
> index 000000000000..4558618efc51
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
> @@ -0,0 +1,24 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2018 Toradex AG
> + */
> +
> +#include "imx6ull-colibri.dtsi"
> +
> +/ {
> +	memory {
> +		reg = <0x80000000 0x10000000>;
> +	};
> +};
> +
> +&iomuxc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
> +		&pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio6>;
> +};
> +
> +&iomuxc_snvs {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio2 &pinctrl_snvs_gpio3>;
> +};
> +
> diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts
> new file mode 100644
> index 000000000000..df72ce1ae2cb
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts
> @@ -0,0 +1,14 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2018 Toradex AG
> + */
> +
> +/dts-v1/;
> +
> +#include "imx6ull-colibri-wifi.dtsi"
> +#include "imx6ull-colibri-eval-v3.dtsi"
> +
> +/ {
> +	model = "Toradex Colibri iMX6ULL 512MB on Colibri Evaluation Board V3";
> +	compatible = "toradex,colibri-imx6ull-wifi-eval", "fsl,imx6ull";
> +};
> diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
> new file mode 100644
> index 000000000000..600bedd8b187
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
> @@ -0,0 +1,70 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2018 Toradex AG
> + */
> +
> +#include "imx6ull-colibri.dtsi"
> +
> +/ {
> +	memory {
> +		reg = <0x80000000 0x20000000>;
> +	};
> +
> +	wifi_pwrseq: sdio-pwrseq {
> +		compatible = "mmc-pwrseq-simple";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_snvs_wifi_pdn>;
> +		reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
> +	};
> +};
> +
> +&cpu0 {
> +	clock-frequency = <792000000>;
> +	operating-points = <
> +		/* kHz	uV */
> +		792000  1225000
> +		528000	1175000
> +		396000	1025000
> +		198000	950000
> +	>;
> +	fsl,soc-operating-points = <
> +		/* KHz	uV */
> +		792000  1175000
> +		528000	1175000
> +		396000	1175000
> +		198000	1175000
> +	>;
> +};
> +
> +&gpmi {
> +	/* NAND chip on Colibri iMX6ULL 512MB WiFi/BT variant supports ONFI */
> +	fsl,use-minimum-ecc;
> +};
> +
> +&iomuxc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
> +		&pinctrl_gpio4 &pinctrl_gpio5>;
> +
> +};
> +
> +&iomuxc_snvs {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio2>;
> +};
> +
> +&usdhc2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc2>;
> +	assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
> +	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
> +	assigned-clock-rates = <0>, <198000000>;
> +	cap-power-off-card;
> +	keep-power-in-suspend;
> +	mmc-pwrseq = <&wifi_pwrseq>;
> +	no-1-8-v;
> +	non-removable;
> +	vmmc-supply = <&reg_module_3v3>;
> +	wakeup-source;
> +	status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
> new file mode 100644
> index 000000000000..277850b16a1b
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
> @@ -0,0 +1,554 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2018 Toradex AG
> + */
> +
> +#include "imx6ull.dtsi"
> +
> +/ {
> +	aliases {
> +		ethernet0 = &fec2;
> +		ethernet1 = &fec1;
> +	};
> +
> +	bl: backlight {
> +		compatible = "pwm-backlight";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_gpio_bl_on>;
> +		enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
> +		status = "disabled";
> +	};
> +
> +	reg_module_3v3: regulator-module-3v3 {
> +		compatible = "regulator-fixed";
> +		regulator-always-on;
> +		regulator-name = "+V3.3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +
> +	reg_module_3v3_avdd: regulator-module-3v3-avdd {
> +		compatible = "regulator-fixed";
> +		regulator-always-on;
> +		regulator-name = "+V3.3_AVDD_AUDIO";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +
> +	reg_sd1_vmmc: regulator-sd1-vmmc {
> +		compatible = "regulator-gpio";
> +		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_snvs_reg_sd>;
> +		regulator-always-on;
> +		regulator-name = "+V3.3_1.8_SD";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <3300000>;
> +		states = <1800000 0x1 3300000 0x0>;
> +		vin-supply = <&reg_module_3v3>;
> +	};
> +};
> +
> +&adc1 {
> +	num-channels = <10>;
> +	vref-supply = <&reg_module_3v3_avdd>;
> +};
> +
> +/* Colibri SPI */
> +&ecspi1 {
> +	cs-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
> +};
> +
> +&fec2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_enet2>;
> +	phy-mode = "rmii";
> +	phy-handle = <&ethphy1>;
> +	status = "okay";
> +
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ethphy1: ethernet-phy at 2 {
> +			compatible = "ethernet-phy-ieee802.3-c22";
> +			max-speed = <100>;
> +			reg = <2>;
> +		};
> +	};
> +};
> +
> +&gpmi {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_gpmi_nand>;
> +	nand-on-flash-bbt;
> +	nand-ecc-mode = "hw";
> +	status = "okay";
> +};
> +
> +&i2c1 {
> +	pinctrl-names = "default", "gpio";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	pinctrl-1 = <&pinctrl_i2c1_gpio>;
> +	sda-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
> +	scl-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
> +};
> +
> +&i2c2 {
> +	pinctrl-names = "default", "gpio";
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +	pinctrl-1 = <&pinctrl_i2c2_gpio>;
> +	sda-gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
> +	scl-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
> +	status = "okay";
> +
> +	ad7879 at 2c {
> +		compatible = "adi,ad7879-1";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_snvs_ad7879_int>;
> +		reg = <0x2c>;
> +		interrupt-parent = <&gpio5>;
> +		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
> +		touchscreen-max-pressure = <4096>;
> +		adi,resistance-plate-x = <120>;
> +		adi,first-conversion-delay = /bits/ 8 <3>;
> +		adi,acquisition-time = /bits/ 8 <1>;
> +		adi,median-filter-size = /bits/ 8 <2>;
> +		adi,averaging = /bits/ 8 <1>;
> +		adi,conversion-interval = /bits/ 8 <255>;
> +	};
> +};
> +
> +&lcdif {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_lcdif_dat
> +		     &pinctrl_lcdif_ctrl>;
> +};
> +
> +&pwm4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm4>;
> +	#pwm-cells = <3>;
> +};
> +
> +&pwm5 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm5>;
> +	#pwm-cells = <3>;
> +};
> +
> +&pwm6 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm6>;
> +	#pwm-cells = <3>;
> +};
> +
> +&pwm7 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm7>;
> +	#pwm-cells = <3>;
> +};
> +
> +&sdma {
> +	status = "okay";
> +};
> +
> +&snvs_pwrkey {
> +	status = "disabled";
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1>;
> +	fsl,uart-has-rtscts;

uart-has-rtscts

> +	fsl,dte-mode;
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart2>;
> +	fsl,uart-has-rtscts;
> +	fsl,dte-mode;
> +};
> +
> +&uart5 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart5>;
> +	fsl,dte-mode;
> +};
> +
> +&usbotg1 {
> +	dr_mode = "otg";
> +	srp-disable;
> +	hnp-disable;
> +	adp-disable;
> +};
> +
> +

One newline is good enough.

> +&usbotg2 {
> +	dr_mode = "host";
> +};
> +
> +&usdhc1 {
> +	assigned-clocks = <&clks IMX6UL_CLK_USDHC1_SEL>, <&clks IMX6UL_CLK_USDHC1>;
> +	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
> +	assigned-clock-rates = <0>, <198000000>;
> +};
> +
> +&iomuxc {
> +	pinctrl_gpio1: gpio1-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00	0x74 /* SODIMM 55 */
> +			MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01	0x74 /* SODIMM 63 */
> +			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0X14 /* SODIMM 77 */
> +			MX6UL_PAD_JTAG_TCK__GPIO1_IO14		0x14 /* SODIMM 99 */
> +			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14	0x14 /* SODIMM 133 */
> +			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x14 /* SODIMM 135 */
> +			MX6UL_PAD_UART3_CTS_B__GPIO1_IO26	0x14 /* SODIMM 100 */
> +			MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15	0x14 /* SODIMM 102 */
> +			MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07	0x14 /* SODIMM 104 */
> +			MX6UL_PAD_UART3_RTS_B__GPIO1_IO27	0x14 /* SODIMM 186 */
> +		>;
> +	};
> +
> +	pinctrl_gpio2: gpio2-grp { /* Camera */
> +		fsl,pins = <
> +			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x74 /* SODIMM 69 */
> +			MX6UL_PAD_CSI_MCLK__GPIO4_IO17		0x14 /* SODIMM 75 */
> +			MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x14 /* SODIMM 85 */
> +			MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18	0x14 /* SODIMM 96 */
> +			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x14 /* SODIMM 98 */
> +		>;
> +	};
> +
> +	pinctrl_gpio3: gpio3-grp { /* CAN2 */
> +		fsl,pins = <
> +			MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02	0x14 /* SODIMM 178 */
> +			MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03	0x14 /* SODIMM 188 */
> +		>;
> +	};
> +
> +	pinctrl_gpio4: gpio4-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x74 /* SODIMM 65 */
> +		>;
> +	};
> +
> +	pinctrl_gpio5: gpio5-grp { /* ATMEL MXT TOUCH */
> +		fsl,pins = <
> +			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x74 /* SODIMM 106 */
> +		>;
> +	};
> +
> +	pinctrl_gpio6: gpio6-grp { /* Wifi pins */
> +		fsl,pins = <
> +			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x14 /* SODIMM 89 */
> +			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x14 /* SODIMM 79 */
> +			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x14 /* SODIMM 81 */
> +			MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x14 /* SODIMM 97 */
> +			MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x14 /* SODIMM 101 */
> +			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x14 /* SODIMM 103 */
> +			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x14 /* SODIMM 94 */
> +		>;
> +	};

The above pinctrl entries are not sorted alphabetically.

> +
> +	pinctrl_can_int: canint-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04	0X14 /* SODIMM 73 */
> +		>;
> +	};
> +
> +	pinctrl_enet2: enet2-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
> +			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
> +			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
> +			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
> +			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
> +			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
> +			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
> +			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
> +			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
> +			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
> +		>;
> +	};
> +
> +	pinctrl_ecspi1_cs: ecspi1-cs-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x000a0
> +		>;
> +	};
> +
> +	pinctrl_ecspi1: ecspi1-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x000a0
> +			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x000a0
> +			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x100a0
> +		>;
> +	};
> +
> +	pinctrl_flexcan2: flexcan2-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX	0x1b020
> +			MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX	0x1b020
> +		>;
> +	};
> +
> +	pinctrl_gpio_bl_on: gpio-bl-on-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_JTAG_TMS__GPIO1_IO11		0x000a0
> +		>;
> +	};
> +
> +	pinctrl_gpmi_nand: gpmi-nand-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x100a9
> +			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x100a9
> +			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x100a9
> +			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x100a9
> +			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x100a9
> +			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x100a9
> +			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x100a9
> +			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x100a9
> +			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x100a9
> +			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x100a9
> +			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x100a9
> +			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x100a9
> +			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x100a9
> +			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x100a9
> +		>;
> +	};
> +
> +	pinctrl_i2c1: i2c1-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
> +			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
> +		>;
> +	};
> +
> +	pinctrl_i2c1_gpio: i2c1-gpio-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0
> +			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0
> +		>;
> +	};
> +
> +	pinctrl_i2c2: i2c2-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
> +			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
> +		>;
> +	};
> +
> +	pinctrl_i2c2_gpio: i2c2-gpio-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001b8b0
> +			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001b8b0
> +		>;
> +	};
> +
> +
> +	pinctrl_lcdif_dat: lcdif-dat-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x00079
> +			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x00079
> +			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x00079
> +			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x00079
> +			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x00079
> +			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x00079
> +			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x00079
> +			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x00079
> +			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x00079
> +			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x00079
> +			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x00079
> +			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x00079
> +			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x00079
> +			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x00079
> +			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x00079
> +			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x00079
> +			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x00079
> +			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x00079
> +		>;
> +	};
> +
> +	pinctrl_lcdif_ctrl: lcdif-ctrl-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x00079
> +			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x00079
> +			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x00079
> +			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x00079
> +		>;
> +	};
> +
> +	pinctrl_pwm4: pwm4-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_NAND_WP_B__PWM4_OUT	0x00079
> +		>;
> +	};
> +
> +	pinctrl_pwm5: pwm5-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_NAND_DQS__PWM5_OUT	0x00079
> +		>;
> +	};
> +
> +	pinctrl_pwm6: pwm6-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_ENET1_TX_EN__PWM6_OUT	0x00079
> +		>;
> +	};
> +
> +	pinctrl_pwm7: pwm7-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT	0x00079
> +		>;
> +	};
> +
> +	pinctrl_uart1: uart1-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX	0x1b0b1
> +			MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX	0x1b0b1
> +			MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS	0x1b0b1
> +			MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS	0x1b0b1
> +		>;
> +	};
> +
> +	pinctrl_uart1_ctrl1: uart1-ctrl1-grp { /* Additional DTR, DCD */
> +		fsl,pins = <
> +			MX6UL_PAD_JTAG_TDI__GPIO1_IO13		0x1b0b1 /* DCD */
> +			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0x1b0b1 /* DSR */
> +			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x1b0b1 /* DTR */
> +			MX6UL_PAD_LCD_DATA19__GPIO3_IO24        0x1b0b1 /* RI */
> +		>;
> +	};
> +
> +	pinctrl_uart2: uart2-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX	0x1b0b1
> +			MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX	0x1b0b1
> +			MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS	0x1b0b1
> +			MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS	0x1b0b1
> +		>;
> +	};
> +	pinctrl_uart5: uart5-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX	0x1b0b1
> +			MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX	0x1b0b1
> +		>;
> +	};
> +
> +	pinctrl_usbh_reg: gpio-usbh-reg {
> +		fsl,pins = <
> +			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x1b0b1 /* SODIMM 129 USBH PEN */
> +		>;
> +	};
> +
> +	pinctrl_usdhc1: usdhc1-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x17059
> +			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x10059
> +			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
> +			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
> +			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
> +			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
> +		>;
> +	};
> +
> +	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x170b9
> +			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x100b9
> +			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
> +			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
> +			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
> +			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
> +		>;
> +	};
> +
> +	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x170f9
> +			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x100f9
> +			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
> +			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
> +			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
> +			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
> +		>;
> +	};
> +
> +	pinctrl_usdhc2: usdhc2-grp {
> +		fsl,pins = <
> +			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17059
> +			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17059
> +			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17059
> +			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17059
> +			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17059
> +			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x17059
> +
> +			MX6UL_PAD_GPIO1_IO03__REF_CLK_32K	0x14
> +		>;
> +	};
> +};
> +
> +&iomuxc_snvs {
> +	pinctrl_snvs_gpio1: snvs-gpio1-grp {
> +		fsl,pins = <
> +			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x14 /* SODIMM 93 */
> +			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x14 /* SODIMM 95 */
> +			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10	0x74 /* SODIMM 105 */
> +			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x14 /* SODIMM 131 USBH OC */
> +			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x74 /* SODIMM 138 */
> +		>;
> +	};
> +
> +	pinctrl_snvs_gpio2: snvs-gpio2-grp { /* ATMEL MXT TOUCH */
> +		fsl,pins = <
> +			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x74 /* SODIMM 107 */
> +		>;
> +	};
> +
> +	pinctrl_snvs_gpio3: snvs-gpio3-grp { /* Wifi pins */
> +		fsl,pins = <
> +			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x14 /* SODIMM 127 */
> +		>;
> +	};
> +
> +	pinctrl_snvs_ad7879_int: snvs-ad7879-int { /* TOUCH Interrupt */

snvs-ad7879-int-grp

Shawn

> +		fsl,pins = <
> +			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x1b0b0
> +		>;
> +	};
> +
> +	pinctrl_snvs_reg_sd: snvs-reg-sd-grp {
> +		fsl,pins = <
> +			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x4001b8b0
> +		>;
> +	};
> +
> +	pinctrl_snvs_usbc_det: snvs-usbc-det-grp {
> +		fsl,pins = <
> +			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0
> +		>;
> +	};
> +
> +	pinctrl_snvs_gpiokeys: snvs-gpiokeys-grp {
> +		fsl,pins = <
> +			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x130b0
> +		>;
> +	};
> +
> +	pinctrl_snvs_usdhc1_cd: snvs-usdhc1-cd-grp {
> +		fsl,pins = <
> +			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0b0 /* CD */
> +		>;
> +	};
> +
> +	pinctrl_snvs_wifi_pdn: snvs-wifi-pdn-grp {
> +		fsl,pins = <
> +			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x14
> +		>;
> +	};
> +};
> +
> -- 
> 2.15.1
> 



More information about the linux-arm-kernel mailing list